Search results

The performance of oil-filled pressure cores is very much affected by the corrugated diaphragm and the oil filling volume. The purpose of this paper is to show the effects of different corrugated diaphragms, different oil filling volumes and different treatments of the corrugated diaphragms on the performance of pressure sensors.

Pressure-sensitive cores with different diaphragm diameters, different diaphragm ripple numbers and different oil filling volumes are produced, and thermal cycling is introduced to improve the diaphragm performance, and finally the performance of each pressure-sensitive core is tested and the test data are analyzed and compared.

The experimental results show that the larger the diameter of the corrugated diaphragm used for encapsulation, the better the performance. For pressure-sensitive cores using smaller diameter corrugated diaphragms, the performance of one corrugation is better than that of two corrugations. When the number of corrugations and the diameter are the same size, the performance of the outer ring of the diaphragm with concave corrugations is better than that with convex corrugations. At the same time, the diaphragm after thermal cycling treatment and appropriate reduction of encapsulated oil filling can improve the performance of the pressure-sensitive core.

By exploring the effects of corrugated diaphragm and oil filling volume on the performance of oil-filled pressure cores, the design of oil-filled pressure sensors can be guided to improve sensor performance.

An axial flow turbojet engine in which the mean direction of flow of working fluid past any moving blade is substantially free from radial components comprising a casing; an air intake in said casing; a low‐pressure axial‐flow compressor mounted in said casing, connected directly to said air intake to receive air through it and having a plurality of rows of moving blades whereof the first row has a hub tip ratio between 0·4 and 0·5; a high‐pressure axial flow compressor mounted in said casing, connected directly to said low‐pressure compressor to receive substantially the whole of the air compressed by said low‐pressure compressor and having a plurality of rows of moving blades; combustion equipment mounted in said casing and connected directly to said high‐pressure compressor to receive substantially the whole of the air compressed by said high‐pressure compressor; a single‐stage axial‐flow high‐pressure turbine mounted in said casing, connected directly to said combustion equipment to receive the products of combustion, and drivingly connected to said high‐pressure compressor, the power developed by said high‐pressure turbine being substantially wholly absorbed by said high‐pressure compressor; and a single‐stage axial‐flow low‐pressure turbine mounted in said casing, connected directly to said high‐pressure turbine to receive the exhaust from it and drivingly connected to said low‐pressure compressor, the power developed by said low‐pressure turbine being substantially wholly absorbed by said low‐pressure compressor; in which engine the ratio of the tip diameter of said low pressure turbine to the tip diameter of said first row of moving blades of said low pressure compressor is between 1 and 1·1; and the ratio between the power absorbed by the high‐pressure compressor and the power absorbed by the low‐pressure compressor is between 2 and 2·5 and the tip diameter of said first row of moving blades of said low pressure compressor is greater than the tip diameter of any other row of moving blades of either of said compressors, and the tip diameter of said low pressure turbine is greater than the tip diameter of said high pressure turbine.

The paper aims to clarify the distribution of excess pore pressure during cone penetration in two-layered clay and its influence on penetrometer resistance.

An arbitrary Lagrangian–Eulerian scheme is adopted to preserve the quality of mesh throughout the numerical simulation. Simplified methods of layered penetration and coupled pore pressure analysis of cone penetration have been proposed and verified by previous studies. The investigation is then extended by the present work to study the cone penetration test in a two-layered clay profile assumed to be homogeneous with the modified Cam clay model.

The reduction of the range of pore pressure with decreasing PF will cause a decrease of the sensing distance. The PF of the underlying soil is one of the factors that determine the development distance. The interface can be obtained by taking the position of the maximum curvature of the penetrometer resistance curve in the case of stiff clay overlying soft clay. In the case of soft clay overlying stiff clay, the interface locates at the maximum curvature of the penetrometer resistance curve above about 1.6D.

The cone penetration analyses in this paper are conducted assuming smooth soil-cone contact.

A simplified method based on ALE in Abaqus/Explicit is proposed for layered penetration, which solves the problem of mesh distortion at the interface between two materials. The stiffness equivalent method is also proposed to couple pore pressure during cone penetration, which achieves efficient coupling of pore water pressure in large deformations.

Despite the well-recognized importance of recycled water, the study of industry-peer pressure on recycled water is relatively new. This study investigates how organizations experience and react to industry-peer pressure to set recycled water targets. Additionally, this study investigates the role of board chairs involved in sustainability committees in contributing to responses to industry-peer pressure.

Using Eviews 12, this study employed a pooled logistic regression model to analyze data from 1,346 firms on Taiwan and Taipei exchanges (2017–2020).

The findings revealed that frequency-based imitation drives recycled water target-setting diffusion. However, there is no direct relationship between outcome-based imitation and recycled water target-setting. Notably, outcome-based imitation drives the adoption of recycled water target-setting of firms with board-chair membership in sustainability committees.

This study faces certain data limitations. First, this study primarily focuses on water recycling. Future research could explore other ways to reduce water usage, such as using water-efficient equipment. Second, this study gathered information solely on the presence or absence of a board chairperson on the sustainability committee. Future researchers could explore the impact of the composition of sustainability committee on recycled water target-setting. Lastly, the sample used in this study is restricted to Taiwan's corporations that existed during 2017–2020. Future researchers may consider adopting a longitudinal design in other economies to address this limitation.

The findings of this study offer several guidelines and implications for recycled water target-setting and the composition of sustainability committees. It responds to an urgent call for solutions to water shortages when pressure from governments and nongovernmental organizations is relatively absent. The number of industry peers that have already set recycled water targets is indispensable for motivating firms to set their own recycled water targets. In terms of insufficient water-related regulatory pressure and normative pressure, this study found evidence suggesting that the direct motivation for setting recycled water targets stems from mimetic pressures via frequency-based imitation. The evidence in this study suggests that policymakers should require companies to disclose their peers’ recycled water target information, as doing so serves as an alternative means to achieving SDG 6.3.

Recycled water target-setting might be challenging. Water recycling practices may face strong resistance and require substantial additional resources (Zhang and Tang, 2019; Gao et al., 2019; Gu et al., 2023). Therefore, this study suggests that firms should ensure the mindfulness of board members in promoting the welfare of the natural environment when making recycled water target-setting decisions. To reap the second-mover advantage, firms must consider the conditions in which board members can more effectively play their role. Corporations may help their chairpersons in setting recycled water targets by recruiting them as members of sustainability committees. Meanwhile, chairpersons tend to activate accurate mental models when the water conservation performance of pioneering industry peers is strong enough to indicate the potential benefits of adopting recycled water target-setting. Investors’ and stakeholders’ understanding of how the composition of sustainability committees is related to recycled water target-setting may help to identify the potential drivers of firms’ water responsibility. Investors and stakeholders should distinguish firms in terms of the board chair’s membership of their sustainability committee and focus on water-use reduction outcomes in the industry. This study provides insights into circumstances whereby chairpersons help to restore the water ecosystem.

This study explains how frequency-based and outcome-based imitation are two prominent mechanisms underlying the industry-peer pressure concerning recycled water target-setting. Moreover, this study fills literature gaps related to the moderating roles of board-chair membership in sustainability committees concerning industry-peer pressure on recycled water target-setting.

Might the impact of the financial stress on exchange markets be asymmetric and exposed to regime changes? Departing from the existing literature, highlighting that the domestic and foreign financial stress in terms of money market have substantial effects on exchange market, this paper aims to investigate the impacts of the bond yield spreads of three emerging countries (Mexico, Russia, and South Korea) on their exchange market pressure indices using monthly observations for the period 2010:01–2019:12. Additionally, the paper analyses the impact of bond yield spread of the US on the exchange market pressure indices of the three mentioned emerging countries. The authors hypothesized whether the negative and positive changes in the bond yield spreads have varying effects on exchange market pressure indices.

To address the research question, we measure the bond yield spread of the selected countries by using the interest rate spread between 10-year and 3-month treasury bills. At the same time, the exchange market pressure index is proxied by the index introduced by Desai et al. (2017). We base the empirical analysis on nonlinear vector autoregression (VAR) models and an asymmetric quantile-based approach.

The results of the impulse response functions indicate that increases/decreases in the bond yield spreads of Mexico, Russia and South Korea raise/lower their exchange market pressure, and the effects of shocks in the bond yield spreads of the US also lead to depreciation/appreciation pressures in the local currencies of the emerging countries. The quantile connectedness analysis, which allows for the role of regimes, reveals that the weights of the domestic and foreign bond yield spread in explaining variations of exchange market pressure indices are higher when exchange market pressure indices are not in a normal regime, indicating the role of extreme development conditions in the exchange market. The quantile regression model underlines that an increase in the domestic bond yield spread leads to a rise in its exchange market pressure index during all exchange market pressure periods in Mexico, and the relevant effects are valid during periods of high exchange market pressure in Russia. Our results also show that Russia differs from Mexico and South Korea in terms of the factors influencing the demand for domestic currency, and we have demonstrated the role of domestic macroeconomic and financial conditions in surpassing the effects of US financial stress. More specifically, the impacts of the domestic and foreign financial stress vary across regimes and are asymmetric.

This study enriches the literature on factors affecting the exchange market pressure of emerging countries. The results have significant economic implications for policymakers, indicating that the exchange market pressure index may trigger a financial crisis and economic recession.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

The inward displacement perpendicular to the body surface produced by compression garment is an important index to evaluate pressure comfort and optimal design of tight clothing products. The purpose of this study is to explore the pressure distribution state at waist position of elastic legwear and then to solve the common problem of excessive pressure or easy slippage for waist of elastic legwear.

In this paper, the authors obtained the waist cross-section model of human body using CT scanning and mimics modeling and then simulated the pressure and displacement distribution after wearing sample four elastic legwear using finite element method. The dressing process of elastic legwear was divided into six periods (instantaneous, 1, 2, 4, 8 and 12 h) in this study, and the finite element software ANSYS was used to simulate the displacement and deformation of the waist cross section. The authors finally obtained the functional relationship between pressure/displacement ratio and angle using curve fitting.

In this paper, the authors obtained the functional relationship between pressure/displacement ratio and angle using curve fitting. Comparison found that the “pressure/displacement–angle” function curve showed an almost consistent trend at any time. That was to say, when the human body was in the state of clothing pressure, the corresponding displacement value of the human body can be calculated by the curve equation under the premise of known pressure value.

This study solves the difficult problem which hard to measure displacement values by conventional methods due to the small deformation of the human body after dressing the compression garment. Conclusions also provide a theoretical reference for evaluating pressure comfort and optimizing clothing structure for the elastic legwear, and this method is also applicable to other types of compression garment.

This study aims to investigate how firms of different sizes respond to competitive pressure from peers.

This study employs machine learning techniques to measure competitive pressure based on management discussion and analysis (MD&A) documents and then utilises the constructed pressure indicator to explore the relationship between competitive pressure and corporate risk-taking behaviours amongst firms of different sizes.

We find that firm sizes are positively associated with their risk-taking behaviours when firms respond to competitive pressure. Large firms are inclined to exhibit a high level of risk-taking behaviours, whereas small firms tend to make conservative decisions. Regional growth potential and institutional ownership moderate the relationships.

Utilising text mining techniques, this study constructs a novel quantitative indicator to measure competitive pressure perceived by focal firms and demonstrates the heterogeneous behaviour of firms of different sizes in response to competitive pressure from peers, advancing research on competitive market pressures.

This study aims to investigate the factors influencing the social responsibility performance of Belt and Road Initiative (BRI) megaprojects. Specifically, it examines the role of isomorphic pressures and the joint influence of perceived benefits and top management support on megaproject social responsibility performance (MSRP).

Drawing from institutional theory, social exchange theory, and top management literature, this study established a conceptual model featuring eleven hypotheses. Subsequently, a questionnaire survey was administered to collect data from 238 actively engaged participants in BRI megaprojects. Structural Equation Modelling was utilised to analyse the data.

The empirical findings indicate that mimetic and coercive pressures positively influence MSRP. Perceived benefits and top management support significantly enhance MSRP. Moreover, perceived benefits and top management support partially mediate the effects of coercive and mimetic pressures. However, when it comes to normative pressures, their impact on MSRP is solely channelled through the support of top management.

This study is one of the early endeavours to explore the factors influencing the social responsibility performance of BRI megaprojects. It sheds light on the interplay between external pressures and internal factors in shaping social responsibility efforts in these projects. These findings are of particular significance for BRI actors and stakeholders, offering guidance for enhancing social responsibility strategies within the context of BRI megaprojects.

The purpose of this paper is to derive the one-dimensional governing equations to describe the pressure distribution, load capacity and stiffness of aerostatic circular thrust bearing with a single air supply inlet.

The film flow field is divided into four regions: supply pressure region, pressure dropping region, pressure rising region and laminar flow region. The influences of bearing clearance and supply pressure on the pressure distribution, load capacity and stiffness of the bearing are presented.

With the large film clearance and large supply pressure, the oblique shock wave occurs near the entrance of gas film, which greatly increases the pressure drop region. Hence, it is not appropriate to consider the oblique shock as a normal shock.

This paper introduces the invariants at the entrance of gas film, employs the functional relationships between density and pressure, and provides the empirical formulas for the pressure dropping and rising regions. The pressure distribution curves are therefore illustrated through a considerably simplified computational process.