Search results

The solution of radiative heat transfer problems in participating media is often obtained using the standard discrete ordinates method (SDOM). This method produces anomalies caused by ray effects if radiative boundary conditions have discontinuities or abrupt changes. Ray effects may be mitigated using the modified discrete ordinates method (MDOM), which is based on superposition of the solutions obtained by considering separately radiation from the walls and radiation from the medium. The purpose of this paper is to study the role of ray effects in combined conduction‐radiation problems and investigate the superiority of the MDOM over SDOM.

The MDOM has been used to calculate radiative heat transfer in irregular geometries using body‐fitted coordinates. Here, the blocked‐off region concept, originally developed in computational fluid dynamics, is used along with the finite volume method and SDOM or MDOM to solve combined conduction‐radiation heat transport problems in irregular geometries. Enclosures with an absorbing, emitting and isotropically or anisotropically scattering medium are analyzed.

The results confirm the capability of the MDOM to minimize the anomalies due to ray effects in combined heat transfer problems, and demonstrate that MDOM is more computationally efficient than SDOM.

The paper demonstrates the application of MDOM to combined conduction‐radiation heat transfer problems in irregular geometries using blocked‐off method.

This study aims to perform a comprehensive investigation to model the thermal characteristics of a coupled conduction-radiation heat transfer in a two-dimensional irregular enclosure including a triangular-shaped heat source.

For this purpose, a promising hybrid technique based on the concepts of blocked-off method, FVM and DOM is developed. The enclosure consists of several horizontal, vertical and oblique walls, and thermal conductivity within the enclosure varies directly with temperature and indirectly with position. To simplify the complex geometry, a promising mathematical model is introduced using blocked-off method. Emitting, absorbing and non-isotropic scattering gray are assumed as the main radiative characteristics of the steady medium.

DOM and FVM are, respectively, applied for solving radiative transfer equation (RTE) and the energy equation, which includes conduction, radiation and heat source terms. The temperature and heat flux distributions are calculated inside the enclosure. For validation, results are compared with previous data reported in the literature under the same conditions. Results and comparisons show that this approach is highly efficient and reliable for complex geometries with coupled conduction-radiation heat transfer. Finally, the effects of thermo-radiative parameters including surface emissivity, extinction coefficient, scattering albedo, asymmetry factor and conduction-radiation parameter on temperature and heat flux distributions are studied.

In this paper, a hybrid numerical method is used to analyze coupled conduction-radiation heat transfer in an irregular geometry. Varying thermal conductivity is included in this analysis. By applying the method, results obtained for temperature and heat flux distributions are presented and also validated by the data provided by several previous papers.

To provide a finite volume code, based on Cartesian coordinates, for studying combined conductive and radiative heat transfer in three‐dimensional irregular geometries.

In the present study, a three‐dimensional blocked‐off‐region procedure was presented and implemented in a numerical code based on the finite volume method to model combined conductive and radiative heat transfer in complex geometries. This formulation was developed and tested in three‐dimensional complex enclosures with diffuse reflective surfaces and containing gray absorbing‐emitting and isotropically scattering medium. This approach was applied to analyze the effect of the main of thermoradiative parameters on the temperature and flux values for three‐dimensional L‐shaped enclosure.

The proposed isotropic model leads to satisfactory solutions with comparison to reference data, which entitles us to extend it to anisotropic diffusion cases or to non‐gray media. The blocked‐off‐region procedure traits both straight and curvilinear boundaries. For curved or inclined boundaries, a fine or a non‐uniform grid is needed.

This paper offers a simple Cartesian practical technique to study the combined conductive and radiative heat transfer in three‐dimensional complex enclosures with both straight and curvilinear boundaries.

Present study aims to extend the lattice Boltzmann method (LBM) to simulate radiation in geometries with curved boundaries, as the first step to simulate radiation in complex porous media. In recent years, researchers have increasingly explored the use of porous media to improve the heat transfer processes. The lattice Boltzmann method (LBM) is one of the most effective techniques for simulating heat transfer in such media. However, the application of the LBM to study radiation in complex geometries that contain curved boundaries, as found in many porous media, has been limited.

The numerical evaluation of the effect of the radiation-conduction parameter and extinction coefficient on temperature and incident radiation distributions demonstrates that the proposed LBM algorithm provides highly accurate results across all cases, compared to those found in the literature or those obtained using the finite volume method (FVM) with the discrete ordinates method (DOM) for radiative information.

For the case with a conduction-radiation parameter equal to 0.01, the maximum relative error is 1.9% in predicting temperature along vertical central line. The accuracy improves with an increase in the conduction-radiation parameter. Furthermore, the comparison between computational performances of two approaches reveals that the LBM-LBM approach performs significantly faster than the FVM-DOM solver.

The difficulty of radiative modeling in combined problems involving irregular boundaries has led to alternative approaches that generally increase the computational expense to obtain necessary radiative details. To address the limitations of existing methods, this study presents a new approach involving a coupled lattice Boltzmann and first-order blocked-off technique to efficiently model conductive-radiative heat transfer in complex geometries with participating media. This algorithm has been developed using the parallel lattice Boltzmann solver.

The purpose of this paper is to develop a three‐dimensional (3D) numerical model capable of predicting the vaporization rate of a liquid fuel droplet exposed to a convective turbulent airflow at ambient room temperature and atmospheric pressure conditions.

The 3D Reynolds‐Averaged Navier‐Stokes equations, together with the mass, species, and energy conservation equations were solved in Cartesian coordinates. Closure for the turbulence stress terms for turbulent flow was accomplished by testing two different turbulence closure models; the low‐Reynolds number (LRN) k‐ε and shear‐stress transport (SST). Numerical solution of the resulted set of equations was achieved by using blocked‐off technique with finite volume method.

The present predictions showed good agreement with published turbulent experimental data when using the SST turbulence closure model. However, the LRN k‐ε model produced poor predictions. In addition, the simple numerical approach employed in the present code demonstrated its worth.

The present study is limited to ambient room temperature and atmospheric pressure conditions. However, in most practical spray flow applications droplets evaporate under ambient high‐pressure and a hot turbulent environment. Therefore, an extension of this study to evaluate the effects of pressure and temperature will make it more practical.

It is believed that the numerical code developed is of great importance to scientists and engineers working in the field of spray combustion. This paper also demonstrated for the first time that the simple blocked‐off technique can be successfully used for treating a droplet in the flow calculation domain.

The use of U‐V technology in conformal coating applications has come of age. This paper discusses the material, process, and equipment which recently have been utilised for the conformal coating of printed wiring boards. First is presented a description of the coating material properties, both uncured and in the cured state. Next follows a discussion of the processing scheme, parameters such as time, speed, and U‐V light source requirement. Hardware to enable the coating operation to fit into an automated assembly line is also described. Of special interest will be the employment of masking techniques to prevent coating of certain critical areas. Lastly, typical performance data on the actual product having the U‐V coating are presented. An overall appraisal of the entire U‐V system is included.

Whilst the overall need to conserve energy is generally accepted, the importance of undertaking a detailed survey before the start of any insulation work in existing buildings is seldom recognised.

Improving the agricultural products market integration is conducive to developing provincial comparative advantage, optimization of agricultural and industrial organization and enhanced competitiveness. The relationship between the emergencies and the agricultural products market integration in the production and consumption provinces is of great significance for stabilizing market prices and improving the efficiency of agricultural resource allocation.

The authors reviewed the literature on the market integration of agricultural products. Then, they adopted a two-way fixed effect model to investigate the impact of emergencies on the poultry market integration in the production and consumption provinces in China.

Highly pathogenic avian influenza (HPAI) caused abnormal fluctuations in the poultry market price and decreased the poultry market integration. The negative impact of HPAI on poultry market integration was strengthened in the main production provinces and weakened in the main consumption provinces.

This is the first study that applies empirical analysis to identify the emergencies’ impact on the poultry market integration considering production and consumption characteristics. The results indicate that the impact of avian influenza is more serious in production provinces than in consumption provinces. Due to the heterogeneity of production and consumption provinces, the government implements precise compensation policies to resume production quickly after the disaster. It can be conductive to market integration and promote the development of agricultural products market.

A solution algorithm for the numerical calculation of isothermal fluid flow inside gas turbine combustors is presented. The finite‐volume method together with curvilinear non‐orthogonal coordinates and a non‐staggered grid arrangement is employed. Cartesian velocity components are chosen as dependent variables in the momentum equations. The turbulent flow inside the combustor is modelled by the k—ε turbulence model. The grid is generated by solving elliptic equations. This solution algorithm, which can be used on both can‐type and annular combustors, is tested on a water model can‐type combustor because of the availability of geometrical and experimental data for comparison.

This paper aims to develop a numerical model to investigate coupled conduction radiation heat transfer in a multilayer semi-transparent polymeric foam.

The model uses a multi-phase approach in which the radiative transfer is determined by solving the radiative transfer equation explicitly in the whole medium incorporating an interface condition valid in the geometric optics rgime. This is executed by using a combination of ray splitting and a discrete curved ray tracing technique. Both partial photon reflection and total internal reflection at the interface are considered in the present investigation.

The directional distribution of intensity within the whole medium can be determined, which is used to obtain the detailed temperature profile inside the domain. The performance of the proposed methodology has been tested by simulating the modelled foam at ambient conditions. The results obtained from the simulations are in good agreement with the published results and shows that there is a global non-linearity in the temperature profile in problems where conduction to radiation parameter is small.

Specular nature of radiative transfer at the interface is accounted for in the present analysis. Instead of working with direction integrated quantities (as in the case of P1 approximation), each bundle of rays is treated separately within the whole medium. This model serves as a starting point for a detailed spatially three dimensional study of heat transfer in foams and the mathematical nature of the formulation is such that it may result in an implementation to three-dimensions.