Search results

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

This study aims to explore and empirically test variables influencing material delivery schedule inaccuracies?

A mixed-method case approach is applied. Explanatory variables are identified from the literature and explored in a qualitative analysis at an automotive original equipment manufacturer. Using logistic regression and random forest classification models, quantitative data (historical schedule transactions and internal data) enables the testing of the predictive difference of variables under various planning horizons and inaccuracy levels.

The effects on delivery schedule inaccuracies are contingent on a decoupling point, and a variable may have a combined amplifying (complexity generating) and stabilizing (complexity absorbing) moderating effect. Product complexity variables are significant regardless of the time horizon, and the item’s order life cycle is a significant variable with predictive differences that vary. Decoupling management is identified as a mechanism for generating complexity absorption capabilities contributing to delivery schedule accuracy.

The findings provide guidelines for exploring and finding patterns in specific variables to improve material delivery schedule inaccuracies and input into predictive forecasting models.

The findings contribute to explaining material delivery schedule variations, identifying potential root causes and moderators, empirically testing and validating effects and conceptualizing features that cause and moderate inaccuracies in relation to decoupling management and complexity theory literature?

This study aims to facilitate access to vascular disease screening for low-income individuals living in remote and conflict areas based on the results of a pilot trial in Colombia. Also, to increase the amount of diagnosis training of vascular surgery (VS) in civilians.

The operation method includes five stages: strategy development and adjustment; translation of the strategy into a real-world setting; operation logistics planning; strategy analysis and adoption. The operation plan worked efficiently in this study’s sample. It demonstrated high sensibility, efficiency and safety in a real-world setting.

The authors developed and implemented a flow model operating plan for screening vascular pathologies in low-income patients pro bono without proper access to vascular health care. A total of 140 patients from rural areas in Colombia were recruited to a controlled screening session where they underwent serial noninvasive ultrasound assessments conducted by health professionals of different training stages in VS.

The plan was designed to be implemented in remote, conflict areas with limited access to VS care. Vascular injuries are critically important and common among civilians and military forces in regions with active armed conflicts. As this strategy can be modified and adapted to different medical specialties and geographic areas, the authors recommend checking the related legislation and legal aspects of the intended areas where we will implement this tool.

Different sub-specialties can implement the described method to be translated into significant areas of medicine, as the authors can adjust the deployment and execution for the assessment in peripheral areas, conflict zones and other public health crises that require a faster response. This is necessary, as the amount of training to which VS trainees are exposed is low. A simulated exercise offers a novel opportunity to enhance their current diagnostic skills using ultrasound in a controlled environment.

Evaluating and assessing patients with limited access to vascular medicine and other specialties can decrease the burden of vascular disease and related complications and increase the number of treatments available for remote communities.

It is essential to assess the most significant number of patients and treat them according to their triage designation. This management is similar to assessment in remote areas without access to a proper VS consult. The authors were able to determine, classify and redirect to therapeutic interventions the patients with positive findings in remote areas with a fast deployment methodology in VS.

Access to health care is limited due to multiple barriers and the assessment and response, especially in peripheral areas that require a highly skilled team of medical professionals and related equipment. The authors tested a novel mobile assessment tool for remote and conflict areas in a rural zone of Colombia.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to as “anatomic” variables) established in the attempt to adopt circular economy (CE) by collecting evidence from a rich empirical set of implementation cases in Italy.

The current literature on IS was reviewed, and a content analysis was performed to identify and define the “anatomic” variables affecting its adoption in the circular economy. We followed a multiple-case study methodology investigating 50 cases of IS in Italy and performed a content analysis of the “anatomic” variables characterizing each case.

This research proposes the “anatomic” variables (i.e. industrial sectors involved, public actors involvement, governmental support, facilitator involvement and geographical proximity) explaining the cases of IS in the circular economy. Each “anatomic” variable is discussed at length based on the empirical evidence collected, with a particular reference to the impact on the different development strategies (i.e. “bottom-up” and “top-down”) in the cases observed.

Current literature on IS focuses on a sub-set of variables characterizing collaboration in IS. This research builds on extant literature to define a new framework of five purposeful “anatomic” variables defining IS in the circular economy. Moreover, we also collect and discuss a broad variety of empirical evidence in what is a still under-investigated context (i.e. Italy).

This study aims to elucidate the process and internal mechanism of place identity construction in traditional villages under the impact of tourism by taking Cuandixia village as a case. The research methods comprise participatory observation and in-depth interviews with the residents. The main results are as follows: the impact of tourism on traditional villages is mainly reflected in space reconstruction, livelihood change, social relations restructuring and culture change; under the impact of tourism, the representation of residents’ identity construction shows complexity, with positive and negative effects; and the place identity construction of residents affects their perception of and attitudes toward tourism. Moreover, self-esteem and self-efficacy principles play a key role in their perception of tourism. This study provides some reference for further investigation of the tourism development model and the mental mechanism of residents in traditional villages.

This paper aims to examine and compare the export performance and competitiveness of Indian and Chinese textile and clothing industry in post-multifibre arrangement (MFA) era.

Balassa’s revealed comparative advantage Index is used to assess the competitiveness of Indian and Chinese textile and clothing exports.

The results indicate that China’s textiles and garments sector holds a greater proportion of the global market compared with India. India has a robust comparative advantage in silk, carpets and cotton post-MFA. Vegetable textile fibers, paper yarn and woven fabrics of paper yarn are also competitive. China had a strong comparative advantage in silk and fabrics; special woven fabrics, tafted textile fabrics, lace, tapestries, trimmings and embroidery in 2005. China also recorded comparative advantage in silk, man-made filaments: strip and the like of man-made textile materials, fabrics; special woven fabrics, tafted textile fabrics, lace, tapestries, trimmings and embroidery and fabrics; knitted or crocheted in 2021.

This study’s results and recommendations could assist the Indian and Chinese Governments develop policies to upgrade their garment industries.

Though vast literature reviews are available for textile and apparel export performance in India and China separately, there are few studies on comparisons. This study is a significant attempt to evaluate India and China’s competitiveness in the global market.

The purpose of this study is to analyze the robot trends of the next generation.

This paper is divided into two sections: the key modern technology on which Europe's robotics industry has built its foundation is described. Then, the next key megatrends were analyzed.

Artificial intelligence (AI) and robotics are technologies of major importance for the development of humanity. This time is mature for the evolution of industrial and service robots. The perception of robot use has changed from threading to aiding. The cost of mass production of technological devices is decreasing, while a rich set of enabling technologies is under development. Soft mechanisms, 5G and AI have enabled us to address a wide range of new problems. Ethics should guide human behavior in addressing this newly available powerful technology in the right direction.

The paper describes the impact of new technology, such as AI and soft robotics. The world of work must react quickly to these epochal changes to enjoy their full benefits.

The major objective of this research work was to evaluate various physico-chemical characteristics, such as, chemical composition, antioxidant capacity, objective color and texture profile analysis (TPA) of the wheat flour/chickpea flour (CF) blends, so that nutritious baked products could be consumed by the type-2 diabetic persons.

Wholegrain wheat flour (WGF) and white wheat flour (WWF) were substituted with CF at 0 to 40% levels. These wheat flour/CF blends were analyzed for proximate composition, the prepared dough and baked breads were tested for objective color, antioxidant capacity as trolox equivalent antioxidant capacity (TEAC), malondialdehyde (MDA) and total phenolic content (TPC) and TPA.

WGF had the highest TEAC (117.42 mM/100g) value, followed by WWF (73.98 mM/100g) and CF (60.67 mM/100g). TEAC, MDA and TPC values varied significantly among all the three flour samples.

Inclusion of whole chickpea (without dehulling) flour in such type of blends would be another interesting investigation during the future research studies.

These research findings have a great potential for the production of these baked products for human consumption on an industrial scale.

Production of breads using wheat flour and CF blends would benefits the consumers.

Production of Arabic and pan breads using wheat flour and CF blends would, therefore, combine the benefits of both the needed proteins of plant origin and the health-promoting bioactive compounds, in a most sustainable way for the consumers.