Search results
1 – 10 of over 4000Rajneesh Kumar, Nidhi Sharma and Paras Ram
A problem concerning with the reflection and transmission of micropolar elastic plane waves at an imperfect interface between two homogeneous, isotropic micropolar elastic…
Abstract
A problem concerning with the reflection and transmission of micropolar elastic plane waves at an imperfect interface between two homogeneous, isotropic micropolar elastic half‐spaces of different micropolar elastic properties has been investigated. The expressions for the reflection and transmission coefficients which are the ratios of the amplitudes of reflected and transmitted waves to the amplitude of incident waves are obtained for an imperfect boundary and deduced for normal couple stiffness, transverse couple stiffness, transverse force stiffness and welded contact. Numerical calculations have been performed for amplitude ratios of various reflected and transmitted waves. The variations of amplitude ratios with angle of incident wave have been depicted graphically. Some special cases have also been deduced from the present investigation. It is found that the amplitude ratios of reflected and transmitted waves are affected by the stiffness and micropolarity of the media.
Details
Keywords
Namita Nanda and J.N. Bandyopadhyay
To investigate the large amplitude free flexural vibration of doubly curved shallow shells in the presence of cutouts.
Abstract
Purpose
To investigate the large amplitude free flexural vibration of doubly curved shallow shells in the presence of cutouts.
Design/methodology/approach
Finite element model using an eight‐noded C0 continuity, isoparametric quadrilateral element is employed. Nonlinear strains of von Karman type are incorporated into the first‐order shear deformation theory.
Findings
Cylindrical shell shows mostly hard spring behavior whereas spherical shell shows both hard spring and soft spring behavior with the increase of amplitude ratios for different cutout sizes, radii of curvature and thickness parameters. At a particular value of the amplitude ratio, the frequency ratio of shells is governed by the interactive effects of stiffness and mass.
Practical implications
Aircraft, spacecraft and many other structures where shell panels are used, undergo large amplitude nonlinear vibrations.
Originality/value
The paper will assist researchers of vibration behavior of elastic systems.
Details
Keywords
Devender Sheoran, Ramesh Kumar, Sunil Kumar and Kapil Kumar Kalkal
The purpose of this paper is to study the reflection of plane waves in an initially stressed rotating thermoelastic diffusive medium with micro-concentrations and two-temperature.
Abstract
Purpose
The purpose of this paper is to study the reflection of plane waves in an initially stressed rotating thermoelastic diffusive medium with micro-concentrations and two-temperature.
Design/methodology/approach
A two-dimensional model of generalized thermoelasticity is considered. The governing equations are transformed into the non-dimensional forms using the dimensionless variables. Then, potential functions are introduced for the decoupling of the waves. Further, appropriate boundary conditions are assumed to completely solve the problem. Finally, numerical computations are performed using MATLAB.
Findings
The problem is solved analytically and it is found that there exist five coupled waves in addition to an independent micro-concentration wave in the considered medium. The amplitude ratios and energy ratios of these reflected waves have also been computed numerically for a specific material.
Originality/value
The modulus values of amplitude ratios are presented graphically to exhibit the effects of angular velocity, initial stress, two-temperature, diffusion and micro-concentration parameters. The expressions of energy ratios obtained in explicit form are also depicted graphically as functions of angle of incidence. The law of conservation of energy at the free surface during reflection phenomenon is also verified.
Details
Keywords
Kirti Boora, Sunita Deswal and Kapil Kumar Kalkal
The purpose of the current manuscript is to investigate the reflection of plane waves in a rotating, two-dimensional homogeneous, initially stressed, nonlocal orthotropic…
Abstract
Purpose
The purpose of the current manuscript is to investigate the reflection of plane waves in a rotating, two-dimensional homogeneous, initially stressed, nonlocal orthotropic thermoelastic solid half-space based on dual-phase-lag model.
Design/methodology/approach
The reflection phenomenon has been utilized to study the effects of initial stress, rotation and nonlocal parameter on the amplitude ratios. During the reflection phenomenon three coupled waves, namely quasi displacement primary wave (qP), quasi thermal wave (qT) and quasi displacement secondary wave (qSV) have been observed in the medium, propagating with distinct velocities. After imposing the suitable boundary conditions, amplitude and energy ratios of the reflected waves are obtained in explicit form.
Findings
With the support of MATLAB programming, the amplitude ratios and energy ratios are plotted graphically to display the effects of rotation, initial stress and nonlocal parameters. Moreover, the impact of anisotropy and phase lags is also observed on the reflection coefficients of the propagating waves.
Originality/value
In the current work, we have considered rotation and nonlocality parameters in an initially stressed orthotropic thermoelastic half-space, which is lacking in the published literature in this field. The introduction of these parameters in a nonlocal orthotropic thermoelastic medium provides a more realistic model for these studies. The present work is valuable for the analysis of orthotropic thermoelastic problems involving rotation, initial stress and nonlocality parameters.
Details
Keywords
Shilpa Chaudhary, Sunita Deswal and Sandeep Singh Sheoran
This study aims to analyse the behaviour of plane waves within a nonlocal transversely isotropic visco-thermoelastic medium having variable thermal conductivity.
Abstract
Purpose
This study aims to analyse the behaviour of plane waves within a nonlocal transversely isotropic visco-thermoelastic medium having variable thermal conductivity.
Design/methodology/approach
The concept of enunciation is used in the generalized theory of thermoelasticity in accordance with the Green–Lindsay and Eringen’s nonlocal elasticity models. The linear viscoelasticity model developed by Kelvin–Voigt is used to characterize the viscoelastic properties of transversely isotropic materials.
Findings
It has been noticed that three plane waves, which are coupled together, travel through the medium at three different speeds. The derivation of reflection coefficients and energy ratios for reflected waves is carried out by incorporating suitable boundary conditions. Numerical computations are performed for the amplitude ratios, phase speeds and energy partition and displayed in graphical form.
Originality/value
The outcomes of the numerical simulation demonstrate that the amplitude ratios are significantly influenced by variable thermal conductivity, nonlocal parameters and viscosity. It is further observed from the plots that the phase speeds in a transversely isotropic medium depend on the angle of incidence. In addition, it has been established that the energy is preserved during the reflection phenomenon.
Details
Keywords
Yaobing Wei, Yanan Li, Jianhui Liu, Gai Wang, Yanlei Guo and Xuemei Pan
In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric…
Abstract
Purpose
In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.
Design/methodology/approach
First, strain-controlled fatigue tests with strain ratios of 0, 0.5 and −1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.
Findings
The proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin–Manson equation, Morrow model and Smith–Watson–Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.
Originality/value
In this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.
Details
Keywords
Pravin Hindurao Yadav, Sandeep R. Desai and Dillip Kumar Mohanty
The purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a…
Abstract
Purpose
The purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a parallel triangular finned tube array subjected to water cross flow.
Design/methodology/approach
The experiment was conducted on finned tube arrays with a fin height of 6 mm and fin density of 3 fins per inch (fpi) and 9 fpi. A dedicated setup has been developed to examine fluid elastic instability and vortex shedding. Nine parallel triangular tube arrays with a pitch to tube diameter ratio of 1.78 were considered. The plain tube arrays, coarse finned tube arrays and fine finned tube arrays each of steel, copper and aluminium materials were tested. Plain tube arrays were tested to compare the results of the finned tube arrays having an effective tube diameter same as that of the plain tube.
Findings
A significant effect of fin density and tube material with a variable mass damping parameter was observed on the instability threshold. In the parallel triangular finned tube array subjected to water cross flow, a delay in the instability threshold was observed with an increase in fin density. For steel and aluminium tube arrays, the natural frequency is 9.77 Hz and 10.38 Hz, which is close to each other, whereas natural frequency of the copper tubes is 7.40 Hz. The Connors’ stability constant K for steel and aluminium tube arrays is 4.78 and 4.87, respectively, whereas it is 5.76 for copper tube arrays, which increases considerably compared to aluminum and steel tube arrays. The existence of vortex shedding is confirmed by comparing experimental results with Owen’s hypothesis and the Strouhal number and Reynolds number relationship.
Originality/value
This paper’s results contribute to understand the effect of tube materials and fin density on fluid elastic instability threshold of finned tube arrays subjected to water cross flow.
Details
Keywords
The impedance of a power control is the complex ratio of force to extension when the applied force is sinusoidal and the input does not move. This definition can be extended if…
Abstract
The impedance of a power control is the complex ratio of force to extension when the applied force is sinusoidal and the input does not move. This definition can be extended if required, however, to cover harmonic perturbations from a constant velocity steady state. The impedance can be expressed in terms of a stiffness and a phase angle or in terms of an inphase component and a quadrature (damping) component.
Huey Tyng Cheong, S. Sivasankaran and M. Bhuvaneswari
The purpose of this paper is to study natural convective flow and heat transfer in a sinusoidally heated wavy porous cavity in the presence of internal heat generation or…
Abstract
Purpose
The purpose of this paper is to study natural convective flow and heat transfer in a sinusoidally heated wavy porous cavity in the presence of internal heat generation or absorption.
Design/methodology/approach
Sinusoidal heating is applied on the vertical left wall of the cavity, whereas the wavy right wall is cooled at a constant temperature. The top and bottom walls are taken to be adiabatic. The Darcy model is adopted for fluid flow through the porous medium in the cavity. The governing equations and boundary conditions are solved using the finite difference method over a range of amplitudes and number of undulations of the wavy wall, Darcy–Rayleigh numbers and internal heat generation/absorption parameters.
Findings
The results are presented in the form of streamlines, isotherms and Nusselt numbers for different values of right wall waviness, Darcy–Rayleigh number and internal heat generation parameter. The flow field and temperature distribution in the cavity are affected by the waviness of the right wall. The wavy nature of the cavity also enhances the heat transfer into the system. The heat transfer rate in the cavity decreases with an increase in the internal heat generation/absorption parameter.
Research limitations/implications
The present investigation is conducted for steady, two-dimensional natural convective flow in a wavy cavity filled with Darcy porous medium. The waviness of the right wall is described by the amplitude and number of undulations with a well-defined mathematical function. An extension of the present study with the effects of cavity inclination and aspect ratio will be the interest for future work.
Practical implications
The study might be useful for the design of solar collectors, room ventilation systems and electronic cooling systems.
Originality/value
This work examines the effects of sinusoidal heating on convective heat transfer in a wavy porous cavity in the presence of internal heat generation or absorption. The study might be useful for the design of solar collectors, room ventilation systems and electronic cooling systems.
Details
Keywords
Mohammad Abbaszadeh, Mohammad Hossein Montazeri and Mojtaba Mirzaie
The purpose of the study is to propose a novel implementation of twisted tape in sinusoidal wavy-walled tubes to enhance the rate of heat transfer without compromising thermal…
Abstract
Purpose
The purpose of the study is to propose a novel implementation of twisted tape in sinusoidal wavy-walled tubes to enhance the rate of heat transfer without compromising thermal efficiency. The study numerically investigates the fluid flow characteristics and analyzes the effect of different geometrical configurations, including wall wave amplitude, tape twist angles and nanoparticle volume fractions, on heat transfer improvement and performance factor.
Design/methodology/approach
This problem is numerically investigated using computational fluid dynamics, and the method is the finite volume method. A two-phase mixture model is used for nanofluid modeling.
Findings
The study investigated the effect of wall waviness, twisted tape, and nanoparticles on forced convective heat transfer and friction factor behavior in laminar pipe flow in three different Reynolds number regimes. The results showed that implementing twisted tape in wavy tubes significantly increased the rate of heat transfer and the performance factor, with the best twist ratio between 90 and 180°. Adding nanoparticles also enhanced heat transfer and performance factor, but to a lesser extent than wavy wall-twisted tape combinations. The study suggests selecting a proper combination of wavy wall and twisted tape at each Reynolds number to achieve an optimum solution.
Originality/value
To the best of the authors’ knowledge, the implementation of the selected passive methods in sinusoidal wavy tubes has not been studied before, and no previous studies have taken into account such a mix of heat transfer improvement techniques.
Details