Search results

This paper aims to focus on the changes in thermal and surface characteristics of acrylonitrile butadiene styrene (ABS) material when exposed to chemical vapours for surface finishing. The poor surface finish and the dimensional accuracy of the fused deposition modelling parts (of ABS material) because of the stair-stepping hinder their use for rapid tooling applications, which can be improved by vapour finishing process. The differential scanning calorimetry (DSC) tests are performed to investigate the thermal behaviour of ABS thermoplastic after vapour finishing.

The hip prosthesis replica has been used to highlight the efficacy of chemical finishing process for intricate and complex geometries. The replicas are treated with chemical vapours for different durations. The DSC tests are performed along with surface roughness, surface hardness and dimensional measurements of exposed replicas and compared with unexposed replica.

The longer finishing time, i.e. 20 s, manifested higher melting peak temperature, higher melting enthalpy and higher heat capacity along with smoother and harder surface as compared with unexposed replica. The finishing process enhanced the bonding strength and the heat-bearing capacity of ABS material. The vapour finishing process enhanced the thermal stability of the material which may extend its sustainability at higher temperatures.

The improved thermal stability of ABS thermoplastic after chemical vapour finishing has been demonstrated. This advancement allows the use of ABS in functional tooling suitable for small production runs with higher flexibility and lead time savings.

The heat effects associated with phase transitions as a function of temperature are studied in case of replicas finished with chemical vapours. The relationship between melting enthalpy and surface characteristics has been ascertained.

The purpose of this paper is to review the various pre-processing and post-processing approaches used to ameliorate the surface characteristics of fused deposition modelling (FDM)-based acrylonitrile butadiene styrene (ABS) prototypes. FDM being simple and versatile additive manufacturing technique has a calibre to comply with present need of tailor-made and cost-effective products with low cycle time. But the poor surface finish and dimensional accuracy are the primary hurdles ahead the implementation of FDM for rapid casting and tooling applications.

The consequences and scope of FDM pre-processing and post-processing parameters have been studied independently. The comprehensive study includes dominance, limitations, validity and reach of various techniques embraced to improve surface characteristics of ABS parts. The replicas of hip implant are fabricated by maintaining the optimum pre-processing parameters as reviewed, and a case study has been executed to evaluate the capability of vapour smoothing process to enhance surface finish.

The pre-processing techniques are quite deficient when different geometries are required to be manufactured within limited time and required range of surface finish and accuracy. The post-processing techniques of surface finishing, being effective disturbs the dimensional stability and mechanical strength of parts thus incapacitates them for specific applications. The major challenge for FDM is the development of precise, automatic and controlled mass finishing techniques with low cost and time.

The research assessed the feasibility of vapour smoothing technique for surface finishing which can make consistent castings of customized implants at low cost and shorter lead times.

The extensive research regarding surface finish and dimensional accuracy of FDM parts has been collected, and inferences made by study have been used to fabricate replicas to further examine advanced finishing technique of vapour smoothing.

This research work aims to make an effort to investigate the effect of fused deposition modelling (FDM) process parameters on the surface finish of acrylonitrile butadiene styrene (ABS) replicas (as pre-processing stage), followed by chemical vapor smoothing (CVS) process (as a post-processing stage) as a case study.

The Taguchi L18 orthogonal array has been used for optimizing process parameters of FDM and CVS processes.

This study highlights that orientation and part density, and the interaction between these two have a significant effect on the surface finish at the pre-processing stage of FDM. However, after post-processing with CVS, there is hardly any influence of pre-processing FDM parameters.

The study highlights that for improving the productivity of the FDM process, the parametric optimization of process may be made on the basis of production cost and time in place of surface finish of ABS replicas. The results obtained have been verified by performing the confirmation experiments.

The purpose of the present study is to investigate statistically controlled investment casting (IC) solution of fused deposition modeling (FDM)-based ABS replicas.

The work started with the identification of the benchmark/component. Prototypes (to be used as pattern) were built on FDM with ABS plastic material, followed by IC. The measurements on final casting prepared were made on the co-ordinate measuring machine (CMM) from which international tolerance (IT) grades were calculated to establish the dimensional accuracy of the components.

This study further highlighted the cast component properties (like hardness and surface finish) for suitability of this process. Final castings produced are acceptable as per international standard organization (ISO) standard UNI EN 20286-I (1995).

This process ensures development of statistically controlled IC solution as technological prototypes and proof of concept at less production cost and time.

This paper aims to investigate the effect of post-processing techniques on dimensional accuracy of laser sintering (LS) of Nylon and Alumide^® and fused deposition modelling (FDM) of acrylonitrile butadiene styrene (ABS) materials.

Additive manufacturing (AM) of test pieces using LS of Nylon and Alumide^® powders, as well as the FDM of ABS materials, were first conducted. Next, post-processing of the test pieces involved tumbling, shot peening, hand finishing, spray painting, CNC machining and chemical treatment. Touch probe scanning of the test pieces was undertaken to assess the dimensional deviation, followed by statistical analysis using Chi-square and Z-tests.

The deviation ranges of the original built parts with those being subjected to tumbling, shot peening, hand finishing, spray painting, CNC machining or chemical treatment were found to be different. Despite the rounding of sharp corners and the removal of small protrusions, the dimensional accuracy of relatively wide surfaces of Nylon or Alumide^® test pieces were not significantly affected by the tumbling or shot peening processes. The immersion of ABS test pieces into an acetone bath produced excellent dimensional accuracy.

Only Nylon PA2200 and Alumide^® processed through LS and ABS P400 processed through FDM were investigated. Future work could also examine other materials and using parts produced with other AM processes.

The service bureaus that produce prototypes and end-use functional parts through AM will be able to apply the findings of this investigation.

This research has outlined the differences of post-processing techniques such as tumbling, shot peening, hand finishing, spray painting, CNC machining and chemical treatment. The paper discusses the advantages and disadvantages of each of those methods and suggests that the immersion of ABS test pieces into an acetone bath produced excellent dimensional accuracy.

The purpose of this paper is to study the functionality of additively manufactured (AM) parts, mainly depending on their dimensional accuracy and surface finish. However, the products manufactured using AM usually suffer from defects like roughness or uneven surfaces. This paper discusses the various surface quality improvement techniques, including how to reduce surface defects, surface roughness and dimensional accuracy of AM parts.

There are many different types of popular AM methods. Unfortunately, these AM methods are susceptible to different kinds of surface defects in the product. As a result, pre- and postprocessing efforts and control of various AM process parameters are needed to improve the surface quality and reduce surface roughness.

In this paper, the various surface quality improvement methods are categorized based on the type of materials, working principles of AM and types of finishing processes. They have been divided into chemical, thermal, mechanical and hybrid-based categories.

The review has evaluated the possibility of various surface finishing methods for enhancing the surface quality of AM parts. It has also discussed the research perspective of these methods for surface finishing of AM parts at micro- to nanolevel surface roughness and better dimensional accuracy.

This paper represents a comprehensive review of surface quality improvement methods for both metals and polymer-based AM parts.

This paper aims to present a survey concerning the accuracy of thermoplastic polymeric parts fabricated by additive manufacturing (AM). Based on the scientific literature, the aim is to provide an updated map of trends and gaps in this relevant research field. Several technologies and investigation methods are examined, thus giving an overview and analysis of the growing body of research.

Permutations of keywords, which concern materials, technologies and the accuracy of thermoplastic polymeric parts fabricated by AM, are used for a systematic search in peer-review databases. The selected articles are screened and ranked to identify those that are more relevant. A bibliometric analysis is performed based on investigated materials and applied technologies of published papers. Finally, each paper is categorised and discussed by considering the implemented research methods.

The interest in the accuracy of additively manufactured thermoplastics is increasing. The principal sources of inaccuracies are those shrinkages occurring during part solidification. The analysis of the research methods shows a predominance of empirical approaches. Due to the experimental context, those achievements have consequently limited applicability. Analytical and numerical models, which generally require huge computational costs when applied to complex products, are also numerous and are investigated in detail. Several articles deal with artificial intelligence tools and are gaining more and more attention.

The cross-technology survey on the accuracy issue highlights the common critical aspects of thermoplastics transformed by AM. An updated map of the recent research literature is achieved. The analysis shows the advantages and limitations of different research methods in this field, providing an overview of research trends and gaps.

The purpose of this study is to investigate dimensional accuracy (Δd), surface roughness (Ra) and micro hardness (HV) of partial dentures (PD) prepared with synergic combination of fused deposition modelling (FDM) assisted chemical vapour smoothing (CVS) patterns and conventional dental casting (DC) from multi-factor optimization view point.

The master pattern for PD was prepared with acrylonitrile butadiene styrene (ABS) thermoplastic on FDM set-up (one of the low cost additive manufacturing process) followed by CVS process. The final PD as functional prototypes was casted with nickel–chromium-based (Ni-Cr) alloy by varying Ni% (Z). The other input parameters were powder to water ratio P/W (X) and pH value (Y) of water used.

The results of this study suggest that for controlling the Δd and R_a of the PD, most important factor is X, followed by Z. For hardness of PD, the most important factor is Z. But from overall optimization viewpoint, the best settings are X-100/12, Y-10 and Z-61% (in Ni-Cr alloy). Further, based upon X-bar chart (for HV), the FDM-assisted DC process used for preparation of PD is statistically controlled.

This study highlights that PD prepared with X-100/12, Y-10 and Z-61% gives overall better results from multi-factor optimization view point. Finally, X-bar chart has been plotted to understand the statistical nature of the synergic combination of FDM, CVS and DC.

This work aims to investigate the interaction effects of printing process parameters of acrylonitrile butadiene styrene (ABS) parts fabricated by fused deposition modeling (FDM) technology on both the dimensional accuracy and the compressive yield stress. Another purpose is to determine the optimum process parameters to achieve the maximum compressive yield stress and dimensional accuracy at the same time.

The standard cylindrical specimens which produced from ABS by using an FDM 3D printer were measured dimensions and tested compressive yield stresses. The effects of six process parameters on the dimensional accuracy and compressive yield stress were investigated by separating the printing orientations into horizontal and vertical orientations before controlling five factors: nozzle temperature, bed temperature, number of shells, layer height and printing speed. After that, the optimum process parameters were determined to accomplish the maximum compressive yield stress and dimensional accuracy simultaneously.

The maximum compressive properties were achieved when layer height, printing speed and number of shells were maintained at the lowest possible values. The bed temperature should be maintained 109°C and 120°C above the glass transition temperature for horizontal and vertical orientations, respectively.

The optimum process parameters should result in better FDM parts with the higher dimensional accuracy and compressive yield stress, as well as minimal post-processing and finishing techniques.

The important process parameters were prioritized as follows: printing orientation, layer height, printing speed, nozzle temperature and bed temperature. However, the number of shells was insignificant to the compressive property and dimensional accuracy. Nozzle temperature, bed temperature and number of shells were three significant process parameters effects on the dimensional accuracy, while layer height, printing speed and nozzle temperature were three important process parameters influencing compressive yield stress. The specimen fabricated in horizontal orientation supported higher compressive yield stress with wide processing ranges of nozzle and bed temperatures comparing to the vertical orientation with limited ranges.

The purpose of this paper is to optimize the process parameters to obtain the best dimensional accuracy, surface finish and hardness of the castings produced by using fused deposition modeling (FDM)-based patterns in investment casting (IC).

In this paper, hip implants have been prepared by using plastic patterns in IC process. Taguchi design of experiments has been used to study the effect of six different input process parameters on the dimensional deviation, surface roughness and hardness of the implants. Analysis of variance has been used to find the effect of each input factor on the output. Multi-objective optimization has been done to find the combined best values of output.

The results proved that the FDM patterns can be used successfully in IC. A wax coating on the FDM patterns improves the surface finish and dimensional accuracy. The improved dimensional accuracy, surface finish and hardness have been achieved simultaneously through multi-objective optimization.

A thin layer of wax is used on the plastic patterns. The effect of thickness of the layer has not been considered. Further research is needed to study the effect of the thickness of the wax layer.

The results obtained by the study would be helpful in making decisions regarding machining and/or coating on the parts produced by this process.

In this paper, multi-objective optimization of dimensional accuracy, surface roughness and hardness of hybrid investment cast components has been performed.