Search results

This paper aims to analyze the pressure distribution of rectangular aerostatic thrust bearing with a single air supply inlet using the complex potential theory and conformal mapping.

The Möbius transform is used to map the interior of a rectangle onto the interior of a unit circle, from which the pressure distribution and load carrying capacity are obtained. The calculation results are verified by finite difference method.

The constructed Möbius formula is very effective for the performance characteristics researches for the rectangular thrust bearing with a single air supply inlet. In addition, it is also noted that to obtain the optimized load carrying capacity, the square thrust bearing can be adopted.

The Möbius transform is found suitable to describe the pressure distribution of the rectangular thrust bearing with a single air supply inlet.

Despite the fact that there being a large literature on simulation, there is as yet no generic paradigm or architecture to develop a three-dimensional (3-D) simulator which depends on autonomous intelligent objects. This has motivated us to introduce a 3-D simulation system based on intelligent objects for Physics Experimentation. We formulated the system’s components as an object-orientation model. So, the entities in every experiment’s work cell are modeled by characterizing their properties and functions into classes and objects of the system hierarchy. Intelligent objects are realized by developing a knowledge base (KB) that captures a set of rules/algorithms that operate on 3-D objects. Rules fall into two categories: action and property rules. In the simulation layer, the student is allowed, by using the virtual system, to stroll throughout the Physics laboratory in light of a walking model. Student gets to a simulation region to do an experiment through the detection of mathematical collision. From software engineering perspective, the proposed system facilitates the Physics experiment through making the specification of its applicable parts more modular and reusable. Moreover, a major pedagogical objective is achieved by permitting the student tuning parameters, fixing component of a device then visualizing outputs. This provides student well interpretation by viewing how distinct parameters affect the outcomes of the experiment. With the objective of student performance measuring, we utilized an exploratory group relying upon pre- and post-testing. The application results demonstrate that the simulator contributes positively to student performance in regard to practical Physics.

Left atrial appendage occlusion (LAAO) is a structural interventional cardiology procedure that offers several possibilities for the application of additive manufacturing technologies. The literature shows a growing interest in the use of 3D-printed models for LAAO procedure planning and occlusion device choice. This study aims to describe a full workflow to create a 3D-printed LAA model for LAAO procedure planning.

The workflow starts with the patient’s computed tomography diagnostic image selection. Segmentation in a commercial software provides initial geometrical models in standard tessellation language (STL) format that are then preprocessed for print in dedicated software. Models are printed using a commercial stereolithography machine and postprocessing is performed.

Models produced with the described workflow have been used at the Careggi Hospital of Florence as LAAO auxiliary planning tool in 10 cases of interest, demonstrating a good correlation with state-of-the-art software for device selection and improving the surgeon’s understanding of patient anatomy and device positioning.

3D-printed models for the LAAO planning are already described in the literature. The novelty of the article lies in the detailed description of a robust workflow for the creation of these models. The robustness of the method is demonstrated by the coherent results obtained for the 10 different cases studied.

The purpose of this paper is to evaluate and exploit the combination of additive manufacturing polymeric technology and structural adhesives. The main advantage is to expand the maximum dimension of the 3D printed parts, which is typically limited, by joining the parts with structural adhesive, without losing strength and stiffness and keeping the major asset of polymeric 3 D printing: freedom of shape of the system and low cost of parts.

The materials used in the paper are the following. The adhesive considered is a commercial inexpensive acrylic, quite similar to superglue, applicable with almost no surface preparation and fast curing, as time constraint is one of the key problems that affects industrial adhesive applications. The 3D printed parts were in acrylonitrile butadiene styrene (ABS), obtained with a Fortus 250mc FDM machine, from Stratasys. The work first compares flat overlap joint with joints designed to permit mechanical interlocking of the adherends and then to a monolithic component with the same geometry. Single lap, joggle lap and double lap joints are the configurations experimentally characterized following a design of experiment approach.

The results show a failure in the substrate, due to the low strength of the polymeric adherends for the first batch of typical bonded configurations, single lap, joggle lap and double lap. The central bonded area, with an increased global thickness, never does fail, and the adhesive is able to transfer the load both with and without mechanical interlocking. An additional set of scarf joints was also tested to promote adhesive failure as well as to retrieve the adhesive strength in this application. The results shows that bonding of polymeric AM parts is able to express its full potential compared with a monolithic solution even though the joint fails prematurely in the adherend due to the bending stresses and the notches present in the lap joints.

Because of the 3D printed polymeric material adopted, the results may be generalized only when the elastic properties of the adherends and of the adhesive are similar, so it is not possible to extend the findings of the work to metallic additive manufactured components.

The paper shows that the adhesives are feasible way to expand the potentiality of 3 D printed equipment to obtain larger parts with equivalent mechanical properties. The paper also shows that the scarf joint, which fails in the adhesive first, can be used to extract information about the adhesive strength, useful for the designers which have to combine adhesive and additive manufactured polymeric parts.

To the best of the researchers’ knowledge, there are scarce quantitative information in technical literature about the performance of additive manufactured parts in combination with structural adhesives and this work provides an insight on this interesting subject. This manuscript provides a feasible way of using rapid prototyping techniques in combination with adhesive bonding to fully exploit the additive manufacturing capability and to create large and cost-effective 3 D printed parts.

Let X⊂ℙr be an integral and non-degenerate complex variety. For any q∈ℙr let rX(q) be its X-rank and S(X,q) the set of all finite subsets of X such that |S|=rX(q) and q   ∈  〈S〉, where 〈〉 denotes the linear span. We consider the case |S(X,q)|>1 (i.e. when q is not X -identifiable) and study the set W(X)q:=∩ S∈S(X,q)〈S〉, which we call the non-uniqueness set of q. We study the case dimX=1 and the case X a Veronese embedding of ℙn. We conclude the paper with a few remarks concerning this problem over the reals.