Search results

Despite the fact that there being a large literature on simulation, there is as yet no generic paradigm or architecture to develop a three-dimensional (3-D) simulator which depends on autonomous intelligent objects. This has motivated us to introduce a 3-D simulation system based on intelligent objects for Physics Experimentation. We formulated the system’s components as an object-orientation model. So, the entities in every experiment’s work cell are modeled by characterizing their properties and functions into classes and objects of the system hierarchy. Intelligent objects are realized by developing a knowledge base (KB) that captures a set of rules/algorithms that operate on 3-D objects. Rules fall into two categories: action and property rules. In the simulation layer, the student is allowed, by using the virtual system, to stroll throughout the Physics laboratory in light of a walking model. Student gets to a simulation region to do an experiment through the detection of mathematical collision. From software engineering perspective, the proposed system facilitates the Physics experiment through making the specification of its applicable parts more modular and reusable. Moreover, a major pedagogical objective is achieved by permitting the student tuning parameters, fixing component of a device then visualizing outputs. This provides student well interpretation by viewing how distinct parameters affect the outcomes of the experiment. With the objective of student performance measuring, we utilized an exploratory group relying upon pre- and post-testing. The application results demonstrate that the simulator contributes positively to student performance in regard to practical Physics.

The aim of this paper is to assess the ability of a stress-blended eddy simulation (SBES) turbulence model to predict the performance of a three-straight-bladed vertical axis wind turbine (VAWT). The grid sensitivity study is conducted to evaluate the simulation accuracy.

The unsteady Reynolds-averaged Navier–Stokes equations are solved using the computational fluid dynamics (CFD) technique. Two types of grid topology around the blades, namely, O-grid (OG) and C-grid (CG) types, are considered for grid sensitivity studies.

With regard to the power coefficient (Cp), simulation results have shown significant improvements of predictions using compared to other turbulence models such as the k-e model. The Cp distributions predicted by applying the CG mesh are in good agreement with the experimental data than that by the OG mesh.

The current study provides some new insights of the use of SBES turbulence model in VAWT CFD simulations.

The SBES turbulence model can significantly improve the numerical accuracy on predicting the VAWT performance at a lower tip speed ratio (TSR), which other turbulence models cannot achieve. Furthermore, it has less computational demand for the finer grid resolution used in the RANS-Large Eddy Simulation (LES) “transition” zone compared to other hybrid RANS-LES models.

To authors’ knowledge, this is the first attempt to apply SBES turbulence model to predict VAWT performance resulting for accurate CFD results. The better prediction can increase the credibility of computational evaluation of a new or an improved configuration of VAWT.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This bibliography is offered as a practical guide to published papers, conference proceedings papers and theses/dissertations on the finite element (FE) and boundary element (BE) applications in different fields of biomechanics between 1976 and 1991. The aim of this paper is to help the users of FE and BE techniques to get better value from a large collection of papers on the subjects. Categories in biomechanics included in this survey are: orthopaedic mechanics, dental mechanics, cardiovascular mechanics, soft tissue mechanics, biological flow, impact injury, and other fields of applications. More than 900 references are listed.

This paper aims to investigate the common-mode voltage (CMV) issue of a three-phase four-leg voltage-source inverter. A new space vector modulation method, named as three-dimensional active zero state Pulse-width modulation (PWM) (3-D AZSPWM), is proposed to reduce the CMV level.

PWM is a general method to generate the switching signals of the power converters in order to obtain high-quality output voltages. However, the CMV produced by PWM methods has become a serious problem. 3-D AZSPWM is proposed to solve this issue. In 3-D AZSPWM, instead of using zero voltage vectors with high CMV level, appropriate complementary non-zero vectors are introduced to synthesize reference vector. The proposed method is classified into four types of AZSPWM1(a), AZSPWM1(b), AZSPWM2(a) and AZSPWM2(b) based on different complementary vectors chosen for each type. An extend software simulation using MATLAB/Simulink is performed to verify the superior performance of the proposed methods.

Compared to other reduced CMV methods, the proposed method not only reduces the CMV but also retains the positive characteristics of the three-dimensional classical space vector PWM (3-D CSVPWM).

The proposed method does not suffer from linear modulation region limitation and also does not impose additional switching loss. Furthermore, calculated output voltage harmonic distortion factor illuminates acceptable quality of output voltage produced by the proposed method.

This paper gives a bibliographical review of the finite element and boundary element parallel processing techniques from the theoretical and application points of view. Topics include: theory – domain decomposition/partitioning, load balancing, parallel solvers/algorithms, parallel mesh generation, adaptive methods, and visualization/graphics; applications – structural mechanics problems, dynamic problems, material/geometrical non‐linear problems, contact problems, fracture mechanics, field problems, coupled problems, sensitivity and optimization, and other problems; hardware and software environments – hardware environments, programming techniques, and software development and presentations. The bibliography at the end of this paper contains 850 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1996 and 2002.

Naturally buoyant flow and heat transfer in a cubic cavity with side opening is analyzed numerically. Vertical wall of the cavity is at a higher temperature than the ambient, while other walls are assumed to be adiabatic. Numerically accurate results are presented for Rayleigh numbers of 10³ to 10⁶ for a fluid having a Prandtl number of 0.71. Unstable flow is predicted for Ra = 1 × 10⁷. The aim of the work is twofold; studying three‐ dimensional flow and heat transfer in a cavity and comparing three‐dimensional results with two‐dimensional approximation to verify the validity of the two‐dimensional model. Convection fluxes are calculated using QUICK scheme with ULTRA‐SHARP flux limiter for two and three‐dimensional simulation. The results indicate that as Rayleigh number increases the difference between two and three dimensional predictions increases. Also, it is found that this difference is greater for the flow field than for the rate of heat transfer.

The ability for learners to interact online via their avatars in a 3-D simulation space means that virtual worlds afford a host of educational opportunities not offered by other learning technology platforms, but their use also raises several pertinent issues that warrant consideration. This chapter reviews the educational use of virtual worlds from a design perspective. Virtual-world definitions are explored, along with their key educational characteristics. Different virtual-world environments are briefly contrasted, including Second Life, Active Worlds, Open Sim, and Minecraft. A wide variety of virtual-world uses in schools and universities are examined so as to understand their versatility. Key educational benefits of virtual worlds are distilled from the literature, such as the ability to facilitate 3-D simulations, role-plays, construction tasks, and immersive learning. Emergent issues surrounding the use of virtual worlds are also analyzed, including cognitive load, safety, and representational fidelity. One higher education and one school level vignette are provided in order to offer more detailed insight into the use of virtual worlds in practice. Recommendations for learning design and implementation are presented, based on the thematic analysis of contemporary virtual-worlds research.

The transistor circuit based on Moore's Law is approaching the performance limit. The three-dimensional integrated circuit (3-D IC) is an important way to implement More than Moore. The main problems in the development of 3-D IC are Joule heating and stress. The stresses and strains generated in 3-D ICs will affect the performance of electronic products, leading to various reliability issues. The intermetallic compound (IMC) joint materials and structures are the main factors affecting 3-D IC stress. The purpose of this paper is to optimize the design of the 3-D IC.

To optimize the design of 3-D IC, the numerical model of 3-D IC was established. The Taguchi experiment was designed to simulate the influence of IMC joint material, solder joint array and package size on 3-D IC stress.

The simulation results show that the solder joint array and IMC joint materials have great influence on the equivalent stress. Compared with the original design, the von Mises stress of the optimal design was reduced by 69.96 per cent, the signal-to-noise ratio (S/N) was increased by 10.46 dB and the fatigue life of the Sn-3.9Ag-0.6Cu solder joint was increased from 415 to 533 cycles, indicating that the reliability of the 3-D IC has been significantly improved.

It is necessary to study the material properties of the bonded structure since 3-D IC is a new packaging structure. Currently, there is no relevant research on the optimization design of solder joint array in 3-D IC. Therefore, the IMC joint material, the solder joint array, the chip thickness and the substrate thickness are selected as the control factors to analyze the influence of various factors on the 3-D IC stress and design. The orthogonal experiment is used to optimize the structure of the 3-D IC.