Search results

Just transition is a fundamental concept for supply chain management but neither discipline pays attention to the other and little is known about how supply chains can be orchestrated as socioecological systems to manage these transitions. Building from a wide range of just transition examples, this paper explores just transition to understand how to move beyond instrumental supply chain practices to supply chains functioning in harmony with the planet and its people.

Building from a systematic review of 72 papers, the paper identifies just transition examples while interpreting them through the theoretical lens of supply chain management, providing valuable insights to help research and practice understand how to achieve low-carbon economies through supply chain management in environmentally and socially just ways.

The paper defines, elaborates, and extends the just transition construct by developing a transition taxonomy with two key dimensions. The purpose dimension (profit or shared outcomes) and the governance dimension (government-/industry-led versus civil society-involved), generating four transition archetypes. Most transitions projects are framed around the Euro- and US-centric, capitalist standards of development, leading to coloniality as well as economic and cultural depletion of communities. Framing just transition in accordance with context-specific plural values, the paper provides an alternative perspective to the extractive transition concept. This can guide supply chain management to decarbonise economies and societies by considering the rights of nature, communities and individuals.

Introducing just transition into the supply chain management domain, this paper unifies the various conceptualisations of just transition into a holistic understanding, providing a new foundation for supply chain management research.

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.

This paper aims to present an interactive design and simulation tool for permanent magnet synchronous machines based on the finite-element-method. The tool is intended for education and research on electrical machines.

A coupling between the software MATLAB and finite element method magnetics is used. Several functionalities are included as modular scripts and represented in the form of a graphical user interface. Included are fully parametrized motor models, automatic winding generations and the evaluation of torque waveforms, core losses and speed-torque-diagrams. A survey was conducted to determine how the motivation of students concerning the covered topics is influenced by using the tool.

Due to its simplicity and the intuitive visualization of the results, the tool provides direct access to the topic of electrical machines without having to deal with separate scripts. The modular structure of the software allows simple extensions with new functions. Because students can directly contribute to the tool with their own work, their motivation for using and extending it increases.

The presented tool offers more functionalities compared to similar free software packages, e.g. the calculation of core losses and speed-torque diagrams. Also, it is designed in such a way that it can be easily understood and extended by students.

The purpose of this work is to optimize the monitoring of vibrations on dynamometric test rigs for railway brakes. This is a quite demanding application considering the continuous increase of performances of high-speed trains that involve higher testing specifications for brake pads and disks.

In this work, authors propose a mixed approach in which relatively simple finite element models are used to support the optimization of a diagnostic system that is used to monitor vibration levels and rotor-dynamical behavior of the machine. The model is calibrated with experimental data recorded on the same rig that must be identified and monitored. The whole process is optimized to not interfere with normal operations of the rig, using common inertial sensor and tools and are available as standard instrumentation for this kind of applications. So at the end all the calibration activities can be performed normally without interrupting the activities of the rig introducing additional costs due to system unavailability.

Proposed approach was able to identify in a very simple and fast way the vibrational behavior of the investigated rig, also giving precious information concerning the anisotropic behavior of supports and their damping. All these data are quite difficult to be found in technical literature because they are quite sensitive to assembly tolerances and to many other factors. Dynamometric test rigs are an important application widely diffused for both road and rail vehicles. Also proposed procedure can be easily extended and generalized to a wide value of machine with horizontal rotors.

Most of the studies in literature are referred to electrical motors or turbomachines operating with relatively slow transients and constant inertial properties. For investigated machines both these conditions are not verified, making the proposed application quite unusual and original with respect to current application. At the same time, there is a wide variety of special machines that are usually marginally covered by standard testing methodologies to which the proposed approach can be successfully extended.

The variance between the winning bid and the owner's estimated cost (OEC) is one of the construction management risks in the pre-tendering phase. The study aims to enhance the quality of the owner's estimation for predicting precisely the contract cost at the pre-tendering phase and avoiding future issues that arise through the construction phase.

This paper integrated artificial neural networks (ANN), deep neural networks (DNN) and time series (TS) techniques to estimate the ratio of a low bid to the OEC (R) for different size contracts and three types of contracts (building, electric and mechanic) accurately based on 94 contracts from King Saud University. The ANN and DNN models were evaluated using mean absolute percentage error (MAPE), mean sum square error (MSSE) and root mean sums square error (RMSSE).

The main finding is that the ANN provides high accuracy with MAPE, MSSE and RMSSE a 2.94%, 0.0015 and 0.039, respectively. The DNN's precision was high, with an RMSSE of 0.15 on average.

The owner and consultant are expected to use the study's findings to create more accuracy of the owner's estimate and decrease the difference between the owner's estimate and the lowest submitted offer for better decision-making.

This study fills the knowledge gap by developing an ANN model to handle missing TS data and forecasting the difference between a low bid and an OEC at the pre-tendering phase.

As the demand for human–robot collaboration in manufacturing applications grows, the necessity for collision detection functions in robots becomes increasingly paramount for safety. Hence, this paper aims to improve the existing method to achieve efficient, accurate and sensitive robot collision detection.

The external torque is estimated by momentum observers based on the robot dynamics model. Because the state of the joints is more accessible to distinguish under the action of the suppression operator proposed in this paper, the mutated external torque caused by joint reversal can be accurately attenuated. Finally, time series analysis (TSA) methods can continuously generate dynamic thresholds based on external torques.

Compared with the collision detection method based only on TSA, the invalid time of the proposed method is less during joint reversal. Although the soft-collision detection accuracy of this method is lower than that of the symmetric threshold method, it is superior in terms of detection delay and has a higher hard-collision detection accuracy.

Owing to the mutated external torque caused by joint reversal, which seriously affects the stability of time series models, the collision detection method based only on TSA cannot detect continuously. The consequences are disastrous if the robot collides with people or the environment during joint reversal. After multiple experimental verifications, the proposed method still exhibits detection capabilities during joint reversal and can implement real-time collision detection. Therefore, it is suitable for various engineering applications.

The purpose of the paper is to analyze the supply and demand of marketing and communication consulting services and evaluate actual and perceived gaps.

The paper uses two different datasets to assess the gap. The supply database comes from desk research carried out in the province of Bergamo (n. 159 consulting agencies). The demand dates are the results of 100 structured interviews with local companies that requested marketing and communication consulting services both inside and outside the province.

Findings show that there is no significant shortage in local service supply. Nonetheless, a limited gap exists between the provision of specific services and their overall quality. Conversely, the perceived gap is wider, leading to an impression of scarce availability – a notion disproven by the analysis of the actual supply.

The study suggests that local agencies may overcome their “myopic” attitude and need to increase their visibility, competencies and expertise by investing in these areas and improving networking.

There are no previous studies that compare the supply and demand for marketing and communication consulting services. The paper also provides insights into actual and perceived gaps in a hypercompetitive environment.

Output from the Irish Dairy Industry has grown rapidly since the abolition of quotas in 2015, with processors investing heavily in capacity expansion to deal with the extra milk volumes. Further capacity gains may be achieved by extending the processing season into the winter, a key enabler for which being the reduction of duration of the winter maintenance overhaul period. This paper aims to investigate if Lean Six Sigma tools and techniques can be used to enhance operational maintenance performance, thereby releasing additional processing capacity.

Combining the Six-Sigma Define, Measure, Analyse, Improve, Control (DMAIC) methodology and the structured approach of Turnaround Maintenance (TAM) widely used in process industries creates a novel hybrid model that promises substantial improvement in maintenance overhaul execution. This paper presents a case study applying the DMAIC/TAM model to Ireland’s largest dairy processing site to optimise the annual maintenance shutdown. The objective was to deliver a 30% reduction in the duration of the overhaul, enabling an extension of the processing season.

Application of the DMAIC/TAM hybrid resulted in process enhancements, employee engagement and a clear roadmap for the operations team. Project goals were delivered, and original objectives exceeded, resulting in €8.9m additional value to the business and a reduction of 36% in the duration of the overhaul.

The results demonstrate that the model provides a structure that promotes systematic working and a continuous improvement focus that can have substantial benefits for wider industry. Opportunities for further model refinement were identified and will enhance performance in subsequent overhauls.

To the best of the authors’ knowledge, this is the first time that the structure and tools of DMAIC and TAM have been combined into a hybrid methodology and applied in an Irish industrial setting.

This study aims to explore an emerging collection of smart building technologies, known as smart workplace solutions (SWS), in the context of facilities management (FM).

This study is based on semi-structured interviews with facility managers in Finland, Norway and Sweden who have deployed SWSs in their organizations. SWS features, based on empirical data from a previous study, were also used to further analyse the interviews.

It analyses the benefits that SWSs bring from the facility management point of view. It is clear that the impetus for change and for deploying SWS in the context of FM is primarily driven by cost savings related to reductions in office space.

This research has been conducted with a focus on office buildings only. However, other building types can learn from the benefits that facility managers receive in the area of user-centred smart buildings.

SWSs are often seen as employee experience solutions that are only related to “soft” elements such as collaboration, innovation and learning. Understanding the FM business case can help make a more practical case for their deployment.

SWSs are an emerging area, and this study has collected data from facility managers who use them daily.

Currently, foresight studies have been adapted to incorporate new techniques based on big data and machine learning (BDML), which has led to new approaches and conceptual changes regarding uncertainty and how to prospect future. The purpose of this study is to explore the effects of BDML on foresight practice and on conceptual changes in uncertainty.

The methodology is twofold: a bibliometric analysis of BDML-supported foresight studies collected from Scopus up to 2021 and a survey analysis with 479 foresight experts to gather opinions and expectations from academics and practitioners related to BDML in foresight studies. These approaches provide a comprehensive understanding of the current landscape and future paths of BDML-supported foresight research, using quantitative analysis of literature and qualitative input from experts in the field, and discuss potential theoretical changes related to uncertainty.

It is still incipient but increasing the number of prospective studies that use BDML techniques, which are often integrated into traditional foresight methodologies. Although it is expected that BDML will boost data analysis, there are concerns regarding possible biased results. Data literacy will be required from the foresight team to leverage the potential and mitigate risks. The article also discusses the extent to which BDML is expected to affect uncertainty, both theoretically and in foresight practice.

This study contributes to the conceptual debate on decision-making under uncertainty and raises public understanding on the opportunities and challenges of using BDML for foresight and decision-making.