Search results

This study aims to explore the link between prevalent risk factors for early childhood diarrhea, including hygiene, feeding, weaning practices and maternal education and the occurrence and severity of early childhood diarrhea in Saudi Arabia.

A case-control study was conducted, involving 98 mothers from the Eastern Region of Saudi Arabia (51 cases and 47 controls). Data were collected from both hospital and community sources. The collected data were statistically analyzed and depicted using descriptive statistics and frequency tables.

Demographic data revealed that 60% of mothers were housewives, 75% had normal deliveries and all babies were full term. In the study cohort, 44% of children aged one to two years. Four domains were compared: diarrheal management, hygiene, weaning and feeding practices. Diarrheal management was suboptimal in some cases: 29% increased fluid intake, 10% maintained adequate food intake, 50% sought medical advice, 58% were familiar with oral rehydration solutions and only 37% used them. Hygiene practices were deficient, with 35% using wipes or sanitizers, 64% handwashing before feeding and 52% adhering to the recommended 10-s duration. Controls exhibited better hygiene practices. Weaning practices were generally similar, with no significant differences between the two groups.

To the best of the authors’ knowledge, this is the first study to collectively report on the risk factors linked to early childhood diarrhea in Saudi Arabia. This study yields significant insights, highlighting the crucial role of managing diarrhea, educating mothers and implementing proper household practices in impacting the occurrence and severity of this perilous ailment.

This research aims to investigate post-forest fire perceptions of businesses towards the environment as a stakeholder. Through interviews with affected businesses, the authors aim to understand whether disasters prompt sustainability prioritisation beyond legal or market demands, shedding light on potential shifts in environmental attitudes and decision-making processes.

The authors used qualitative methods to investigate post-disaster shifts in environmental perceptions. Using site visits, preparatory meetings and semi-structured interviews between October 2017 and April 2021, the authors gained insights into destruction, recovery efforts and stakeholder perspectives. Content analysis provided valuable decision-making insights, particularly in understanding the landscape dominated by SMEs reliant on short-term strategies.

Interviews revealed varied perspectives on stakeholder recognition, especially concerning the natural environment. Although some managers promptly acknowledged stakeholder groups, the recognition of the natural environment as one varied. Concerning the natural environment as a stakeholder, responses ranged from ecological acknowledgment to denying its stakeholder status. Despite differing views, many agreed on the forest's importance, especially for resource-reliant industries. The findings suggest that although many decision makers verbally acknowledge the natural environment as a stakeholder, their actions reveal the opposite.

The limitations are the COVID-19 pandemic in the data research phase. The methodology applied (qualitative) can be a limitation in itself and the authors recommend further research, applying mixed or quantitative methods. The research covers one event in one country. It is relevant to test our questions and conclusions in other countries/after other natural disasters. Incorporating other stakeholders' views and exploring alternative theories could enhance understanding and challenge existing results.

This study holds practical implications for understanding the relationship between organisations and the natural environment, particularly in recognising it as a stakeholder. By acknowledging the environment as a stakeholder, organisations can mitigate the effects of future natural disasters, as well as reducing their environmental footprints. Implementing these insights can lead to more informed decision-making processes and contribute to more effective resources and stakeholder management.

Recognizing the environment as a stakeholder fosters environmental consciousness and community engagement. Addressing the natural environment as such enhances the ownership and responsibility of the surrounding natural environment.

The study's originality lies in its exploration of organisational responses to natural disasters, particularly in recognizing the environment as a stakeholder. It offers unique insights into decision-making processes and attitudes towards environmental responsibility, contributing to advancing understanding and informing strategies for sustainable disaster management on a global scale.

In 2021, Dr Shang-Ying Chen, chair of the Department of Theatre Arts at National Sun Yat-sen University, invited me to teach in Taiwan for the 2022 academic year. I taught six 16- to 18-week courses, including creativity, marketing, theater management, and research methods, to 100 undergraduate and graduate college students in English.

As a published sociologist and practitioner of accessibility, diversity, equity, and inclusion (ADEI), I seek to center ADEI in every aspect of my own life, which includes my teaching. My chapter “Teaching ADEI in Taiwan” is an autoethnographic study, utilizing participant observation in documenting the ways in which inclusive pedagogies of ADEI impact teaching and learning in Taiwan. As a Jewish white English-speaking researcher-teacher, I also interrogate my own racial awareness and the impact it has on my efforts to provide my Taiwanese students with an education that is culturally responsive. ¹

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

Herein, the authors report the effects of printing parameters, joining method, and annealing conditions on the structural performance of fusion-joined short-beam sections produced by additive manufacturing.

The authors first identified appropriate printing parameters for joining segmented short beams and then used those parameters to print and fusion-join segments with different configurations of stiffeners to form a longer section of a wing or small wind turbine blade structure.

It was found that the beams with three lateral and three base stiffening ribs give the highest flexural strength among the three beams investigated. Results on joined beams annealed at different conditions showed that annealing at 70 °C for 0.5 h yields higher performance than annealing at the same temperature for longer times. It is also found that in the case of the hot-plate-welded three-dimensional (3D)-printed structures, no annealing is needed for reaching a high strength-to-weight ratio, but annealing is helpful for maximizing the modulus-to-weight ratio. Both thermal buckling and edge wrapping were observed under annealing at 70°C for 0.5 h for 3D-printed beams comprising two lateral and four base stiffening plates.

Fusion-joining of additively manufactured segments is needed owing to the constraint in building volume of a typical commercial 3D-printer. However, study of the effect of process parameters is needed to quantify their effect on mechanical performance. This investigation has therefore identified key printing parameters and annealing conditions for fusion-joining short segments to form larger structures, from multiple 3D-printed sections, such as wind blade structures.

Advances in digital technologies and the growing number of touch points have had a significant impact on the shopping behaviour of omnichannel customers. Several research papers have explored different facets of omnichannel, but only a few have thoroughly explored the literature on showrooming and webrooming simultaneously. This paper aims to identify the key groups of antecedents influencing customer buying behaviour in omnichannel, under the influence of digital technologies, with a particular focus on showrooming and webrooming.

Our study conducted a systematic literature review to identify the factors influencing customers’ buying behaviour in omnichannel, which have been the subject of academic discussion over the last decade. We finalized 149 articles for the thematic analysis and identified three groups of antecedents: channel-related, product-related and consumer-related with their subgroups.

Under channel-related antecedents, cost and perceived benefits, search convenience, need for interaction and situational circumstances have been identified as major attributes. The expressiveness of the product, product demonstration and search and experienced products have been identified under product-related antecedents, followed by price consciousness, past experiences, perceived risks and shopping motivations as leading attributes under consumer-related antecedents. The study revealed the multifaceted influence of digital technologies on omnichannel buying behaviour. Digital technologies are shaping the antecedents related to channels, products and consumers. Digital technologies simultaneously mediate between antecedents and the selection of a specific path within an omnichannel environment. Showrooming and webrooming should no longer be seen as general concepts. The rise of digital technologies has led to the development of new consumer journey patterns and the blurring of distinctions between showrooming and webrooming. A conceptual framework has been proposed to understand consumers' omnichannel behaviour, having considered the identified antecedents and the role of digital technologies.

This study advances the academic understanding of consumer behaviour in omnichannel under the influence of digital technologies and provides important implications for omnichannel management. With the advancement of digital technologies such as augmented reality and virtual reality, retailers should implement channel integration strategies to bridge the gap between online and offline channels, providing a memorable shopping experience for omnichannel customers.

This study is unique because it identifies and analyses the antecedents of consumer behaviour in omnichannel settings under the influence of digital technologies. It also uncovers new potential combinations of showrooming and webrooming patterns. The proposed framework can help retailers in their future planning of omnichannel strategies.

This study examines the impact of urbanization on growth and the role of international financial flows in the urbanization-growth nexus.

The study applies the panel least square estimation to examine the impact of urbanization on growth using panel data from 50 developing countries from 1980 to 2016. Further, addressing the endogeneity issues in panel estimations, the study applies the dynamic System-GMM approach to investigate the role of financial flows in urbanization and their impact on economic growth in developing countries.

Contrary to the conventional literature, we found a non-linear (U-shaped) relationship between urbanization and growth. Our findings demonstrate that growth is reduced at a lower level of urbanization due to less availability, concentration, and synchronization of production factors. The concentration of physical and human capital and technological advancement in urban areas help developing countries achieve economic growth at a higher level of urbanization. Robust estimations divulged that foreign aid spent on infrastructure development and expanding urban regions helps promote economic growth. Nevertheless, as a resilient factor, remittances buffer the rapid pace of urbanization and reduce growth by resisting the migration of labor and capital from rural to urban areas.

The paper's findings suggest policymakers promote urban infrastructure and development using local and international funds since its increased level spurs economic growth. Further, the results advise policymakers to reduce aid dependency, attract FDI, and facilitate the easy and low-cost transfer of money to promote remittance inflows since both FDI and remittances positively contribute to economic growth.

The paper contributes significantly to the literature by determining the U-shaped relationship between urbanization and growth and highlighting the role of international flows in the urbanization-growth nexus.

Job dissatisfaction is a prevalent, yet understudied phenomenon. This study aims to examine the determinants of job dissatisfaction among information technology (IT) professionals. Based on the relative deprivation theory and the social exchange theory, this study examines the complex linkage between work-related boredom, felt deprivation, leader–member exchange and job dissatisfaction.

The questionnaire-based survey data were collected from IT professionals working in Bangalore, India. Regression with process macro was used for data analysis.

This study found the predictors of job dissatisfaction and felt deprivation. It also found the path through which work-related boredom impacts job dissatisfaction (through felt deprivation). Furthermore, it found that the direct effect of boredom on felt deprivation is greater for employees in close relationships with the leader.

Job dissatisfaction is one of the critical factors that has several adverse consequences for individuals and the organization. This study provides the antecedents, explains the path and suggests a boundary condition leading to job dissatisfaction. It further highlights the adverse consequences of work-related boredom on felt deprivation for employees having strong leader–member exchange relationships.

This study contributes to the literature on job dissatisfaction, boredom, felt deprivation and leader–member exchange in the IT sector in an emerging economy. To the best of the author’s knowledge, this is one of the early studies that explain the mechanism and the conditions leading to felt deprivation and job dissatisfaction.