Search results

Food waste is a severe problem affecting the supply chain due to its significant adverse social and environmental effects. Even if the topic is hotly debated in the literature, there is a lack of research about the success factors influencing food waste prevention initiatives retailers undertake.

The research analyzes how several variables (i.e. product-related variables and technology-enabling variables) might impact the success of the sales of products close to the expiration date that is sold at a discounted price. Data from 390.000 products sold at a discounted price in 2020 and 2021 by a large Italian food retailer were examined with a regression analysis.

The results highlight that both product-related and technology-enabling variables influence the success of food prevention initiatives aimed at selling products close to the expiration date at a discounted price. In particular, the authors stress the importance of digital technologies in supporting food waste prevention initiatives.

The study offers several practical implications for managers in structuring a waste prevention initiative. The introduction of digital technologies, the monitoring of specific variables or the ability to find synergies with other food waste prevention initiatives are discussed to support retailers in reducing food losses.

The paper is focused on the retailer perspective, which is barely investigated due to the difficulty in finding data.

The purpose of this paper is to give an account for preparative collaboration between the police and municipal eldercare in Sweden concerning missing persons with dementia.

Design/methodology/approach used was a qualitative case study design, consisting of one focus group with representatives for the participating organisations, followed by directed content analysis.

The findings showed a lack of current collaboration and reluctance to new collaborative initiatives. However, when focussing on preparative collaboration of coordinated responses to missing incidents, possibilities for improvement could be identified. The improvements concerned updated personnel response checklists, along with suggestions for an elaborate life story document in eldercare, with police access. Finally, better coordination of the return of the found person and a follow up were proposed.

It is suggested that collaboration must be given different meanings and use different approaches adapted to the different phases in a rescue operation. In the preparation and the response phase, the focus should be on coordination of the resources available. In the pre-planning and prevention phases, as well as in evaluation and learning, horizontal collaboration is more suitable. The amount of data in this study is a research limitation which calls for further research.

It is suggested that collaboration must be given different meanings and use different approaches adapted to the different phases in a rescue operation. In the preparation and the response phase, the focus should be on coordination of the resources available. In the pre-planning and prevention phases, as well as in evaluation and learning, horizontal co-operation is more suitable.

The originality/value of this paper can be found in the novelty of missing person research in Sweden, and in practical suggestions for preparative collaboration concerning persons with dementia who go missing. Finally, it can be found in the suggested need for a more dynamic and process-sensitive view of collaboration in SAR or rescue operations.

This article summarizes the international scientific research output of global forest product models, infers future research trends and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.

In 1999, Joseph Buongiorno, a scholar at the University of Wisconsin in the United States of America, proposed the global forest products model (GFPM), which was first applied to research in the global forestry sector. GFPM is a recursive dynamic model based on five assumptions: macroeconomics, local equilibrium, dynamic equilibrium, forest product conversion flow and trade inertia. Using a certain year from 1992 to present as the base period, it simulates and predicts changes in prices, production and import and export trade indicators of 14 forest products in 180 countries (regions) through computer programs. Its advantages lie in covering a wide range of countries and a wide variety of forest products. The data mainly include forest resource data, forest product trade data, and other economic data required by the model, sourced from the Food and Agriculture Organization (FAO) of the United Nations and the World Bank, respectively.

Compared to international quantitative and modeling research in the field of forest product production and trade, China's related research is not comprehensive and in-depth, and there is not much quantitative and mathematical modeling research, resulting in a significant gap. This article summarizes the international scientific research output of global forest product models, infers future research trends, and provides reference for quantitative analysis and mathematical modeling of Chinese forest product problems, with the aim of contributing to promoting domestic production of Chinese forest products and strengthening international trade competitiveness of forest products.

On the basis of summarizing and analyzing the international scientific research output of GFPM, sorting out the current research status and progress at home and abroad, this article discusses potential research expansion directions in 10 aspects, including the types, yield and quality of domestic forest product production, international trade of forest products, and external impacts on the forestry system, in order to provide new ideas for global forest product model research in China.

Although existing literature emphasizes the significance of diversity and inclusion in management roles for employees, there is a notable absence of a standardized scale to assess employees’ perceptions of an inclusive climate, particularly in relation to practices that encourage acceptance of demographically diverse leaders. This study aims to bridge this gap by developing the perceived inclusion climate for leader diversity (PICLD) scale.

The scale development process was carried out in five phases which included: qualitative component (interviews); test for face validity; check for content validity; construct and criterion-related validity; and nomological network testing.

Following the first three phases of scale development, 12 measurement items were produced. Phase four results indicate that PICLD is distinct from both the intercultural group climate scale and diversity-oriented leadership scale, in which all three scales were found to be positively correlated with job satisfaction. Phase five results show that PICLD positively correlates with organizational justice. Organizational justice also mediates the relationship between PICLD and three employee outcomes (performance, engagement and turnover intention).

Organizations are encouraged to be open to suggestions made by managers from historically marginalized groups that motivate diverse leaders to voice their concerns to foster inclusionary climate perceptions among employees. Welcoming diverse managerial perspectives can dismantle systemic barriers, enabling marginalized leaders to thrive while fostering employees’ perceptions of an inclusionary workplace.

This study introduces the PICLD Scale to enhance comprehension of how policies supporting leader demographic diversity impact employee perceptions of inclusive climate. This research also contributes to the advancement of social exchange theory and literature on organizational justice, performance and engagement.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

Decentralised administrative arrangements and the active function of local government organisations are essential to tackle crisis effectively. Using Bangladesh as a case study, this paper examines the central and local government administrative arrangements during COVID-19 pandemic.

This study applies qualitative content analysis and interviews to explore the local government’s role in Bangladesh’s COVID-19 management by interviews of 18 participants including government officials, experts, non-government organisations (NGOs) representatives, and the general public. This paper also analysed academic papers, policy documents and other publicly available documents, including newspaper reports.

The Constitution of Bangladesh intensified the active participation of local government in each administrative unit through decentralised administrative management. This paper however reveals that the administrative arrangement during the COVID-19 pandemic in Bangladesh was primarily a centrally led system. The local government was not sufficiently involved, nor had it integrated into the planning and coordination process. This indicated the absence of active decentralised administration.

This study fills the research gap of the administrative pattern and local relations in COVID-19 management by exploring the local government’s role during the catastrophic situation and highlights the importance of decentralised administrative actions in managing the crisis.

This study aims to evaluate the participation and satisfaction of learners with the brief “Mental health promotion in school health care” e-learning course, and to describe factors related to their participation and satisfaction.

A convergent mixed-method study with a descriptive, posttest-only design was conducted in Finland. Quantitative data was collected from the learning portal data and via an electronic feedback questionnaire and qualitative data in four focus group discussions.

The three modules of the course were opened altogether 12,922 times during the 21 months period. The identified factors influencing participation within the course were: favorite methods attracting attention, the relevance of additional information and postprocessing boosting diligence. The learners’ satisfaction with the course was high. The factors identified for improving satisfaction were: filling gaps in earlier education, clear and concise structure and content, inspiring and interesting design and suitability for clinical use. In addition to the primary target group (school nurses), the course was well-participated and evaluated as satisfying among other health and social care professionals as well as undergraduate students.

This study demonstrates demand for brief, fully online mental health trainings among school nurses, but also among other health and social care professionals and students. The results indicate that learners perceive such training as beneficial. This paper also presents a novel training intervention and its pedagogical base.

Robotics and automation are successful in construction, health and safety, but costs and expertise hinder their use in developing nations. This study examined mobile apps as a more accessible and affordable alternative.

This descriptive study explored the use of mobile apps in construction, health and safety management. It used a literature review to identify their availability, accessibility, and capabilities. The study consisted of four five stages: searching for relevant apps, selecting them based on versatility, examining their specific functions, removing untested apps and discussing their functions based on empirical studies.

A comprehensive literature review identified 35 mobile apps that are relevant to health and safety management during construction. After rigorous analysis, eight apps were selected for further study based on their relevance, user friendliness and compliance with safety standards. These apps collectively serve 28 distinct functions, including first-aid training and administration, safety compliance and danger awareness, safety education and training, hazard detection and warnings.

This study suggests that mobile apps can provide a cost-effective and readily accessible alternative to robotics and automation in health and safety management in construction. Further research is needed to accurately assess the efficacy of these apps in real-world conditions.

This study explored the use of apps in health and safety management, highlighting their diverse capabilities and providing a framework for project managers, contractors and safety officers to select suitable apps.

This article aims to evaluate published food cold chain (FCC) literature against risk management and supply chain sustainability concepts.

The article uses the theory refinement logic proposed by Seuring et al. (2021) to analyze the contents of FCC management-related literature published over the past 20 years. A sample of 116 articles was gathered using Web of Science and subsequently analyzed. The respective articles were then systematically coded against the frameworks of Beske and Seuring (2014) and Vlajic et al. (2012), which focused on building sustainable and robust supply chains, respectively.

The literature review revealed that debates around managing contemporary sources of disruptions/vulnerability and making FCCs more sustainable and resilient are gradually developing. However, an overarching risk management perspective along with incorporating social and environmental dimensions in managing FCCs still needs the adequate attention of the respective research community.

The deductive internal logic of theory refinement approach used in this paper could have been further strengthened by using additional frameworks. This limitation, however, opens avenues for further research. The findings of the paper will stimulate the interest of future researchers to work on expanding our understanding related to sustainability and risk management in FCCs.

The paper is the first attempt to organize published FCC literature along dimensions of supply chain sustainability and risk management. The paper thus provides the respective researchers with a foundation that will help them adopt a focused approach to addressing the research gaps.

This study explored the ramifications of COVID-19 on construction operations in Malaysia.

Following a detailed literature review, 37 ramifications are identified and divided into nine aspects. A self-designed survey is then employed to seek the perceptions of construction practitioners around the Klang Valley region regarding the significance of the ramifications. A total of 203 valid responses are subjected to statistical analyses to prioritise the ramifications.

All the potential ramifications are perceived to be significant, with the five utmost critical ramifications being rescheduling the project timeline, compliance with government SOP, delay in the handover project, compulsory COVID-19 test for all workers and the extra cost incurred to provide COVID-19 test for workers.

This study highlights the ramifications of COVID-19 on construction operations and deliberately informs construction organizations regarding the shortcomings of recent construction management. Besides, the insights suggested that industry practitioners devise corresponding strategies for project sustainability in future similar crises.

The findings serve as a valuable reference and are benign to industry professionals and researchers from developing nations, especially nations that share similar characteristics to Malaysia.