Search results

The participation of females in economic activity remains a challenge, and received a lot of attention for a better labor policy discourse. The empirical research focused widely on the relationship between female labor force participation (FLFP) and economic development, called the feminization U-shape hypothesis. However, the linear/nonlinear relationship has been questioned due to empirical and methodological anomalies. Hence, this study aims to extend the previous work by reexamining this relationship in Pakistan.

The annual data from 1980 to 2021, the unit root tests augmented Dickey–Fuller and Phillips and Perron, the conventional autoregressive distributed lag bound test approach by including the quadratic-term of GDP per capita and the novel Sasabuchi–Lind–Mehlum (SLM) U test (2010) used for empirical estimation.

The findings revealed the prospects of a long-run nonlinear association between FLFP and economic development in Pakistan. However, an inverse U-shape exists between the female labor force participation rate (FLFPR) and GDP per capita, predicting that FLFP may decline in the future.

The traditional feminization U-shape hypothesis has little empirical support in the case of Pakistan. Therefore, the Government of Pakistan should enhance the enabling environment for females through the provision of better job opportunities, technical skills, on-the-job training and social security benefits during all phases of economic development.

The conventional approach of testing U-shape is insufficient. To the best of the authors’ knowledge, therefore, this study incorporated a wider data set in a time series that is less evident, an advanced methodology SLM U test (2010), to validate the feminization U-shape hypothesis in Pakistan for the first time.

The purpose of this study is to design and process the optimal V-shaped microstructure for 7075 aluminum alloy and reveal its wear resistance mechanism and performance.

The hydrodynamic pressure lubrication models of the nontextured, V-shaped, circular and square microtextures are established. The corresponding oil film pressure distributions are explored. The friction and wear experiments are conducted on a rotating device. The effects of the microstructure shapes and sizes on the wear mechanisms are investigated via the friction coefficients and surface morphologies.

In comparison, the V-shaped microtexture has the largest oil film carrying capacity and the lowest friction coefficient. The wear mechanism of the V-shaped microtexture is dominated by abrasive and adhesive wear. The V-shaped microtexture has excellent wear resistance under a side length of 300 µm, an interval of 300 µm and a depth of 20 µm.

This study is conductive to the design of wear-resistant surfaces for friction components.

Restaurant operators often use auspicious connotations embedded in the names and shapes of dishes to increase consumers’ purchase intentions. However, the interaction effect of multiple auspicious cues (i.e. food name and shape) on purchase intentions has rarely been examined in the restaurant context. Thus, grounded in processing fluency theory, this study investigates the direct influence of the two-way interaction effect of food name (auspicious vs nonauspicious) and shape (auspicious vs. nonauspicious) on purchase intentions and its indirect influence via perceived auspiciousness and positive emotions.

Utilizing a 2 (food name: auspicious name vs. nonauspicious name) × 2 (food shape: auspicious shape vs. nonauspicious shape) between-subjects design, the authors conducted two experimental studies with 356 Chinese customers. In Study 1, which focused on a main dish, we investigated the two-way interaction effect food name × food shape on purchase intentions. In Study 2, we replicated this experimental study by focusing on a different food type (i.e. dessert) to test the direct and indirect influences of the two-way interaction of food name × food shape on purchase intentions through perceived auspiciousness and positive emotions.

The results reveal that the congruity condition of auspicious names and shapes significantly influences consumers’ purchase intentions. Congruity with auspicious food cues also indirectly affects purchase intentions through consumers’ perceived auspiciousness and positive emotions. These effects were consistently observed in two experimental studies analyzing different dish types (main dish and dessert).

Restaurateurs should consider utilizing auspicious food cues to attract customers. Specifically, they should combine both food name and shape to increase their perceived auspiciousness and sales.

This study tested processing fluency theory using auspicious food cues. This study contributes to the hospitality literature by improving our understanding of the congruence effect by exemplifying the conceptual alignment between food name and food shape.

The shape of a product plays a crucial role in shaping consumer behavior. Despite the voluminous research on factors influencing consumers’ shape preferences, there remains a limited understanding of how the busy mindset, a mentality increasingly emphasized by marketing campaigns, works. This study aims to fill this gap by exploring the relationship between a busy mindset and the preference for angular-shaped versus circular-shaped products and brand logos.

This research consists of seven experimental studies using various shape stimuli, distinct manipulations of busy mindset, different assessments of shape preference and samples drawn from multiple countries.

The findings reveal that a busy mindset leads to a preference for angular shapes over circular ones by amplifying the need for uniqueness. In addition, these effects are attenuated when products are scarce.

This research represents one of the pioneering efforts to study the role of a busy mindset on consumers’ aesthetic preferences. Beyond yielding insights for practitioners into visual marketing, this research contributes to the theories on the busy mindset and shape preference.

This study aims to develop a four-dimensional (4D) textile composite that self-forms upon thermal stimulation while eliminating thermomechanical programming steps by using fused deposition modeling (FDM) 3D printing technology, and tries to refine the product development path for this composite.

Polylactic acid (PLA) printing filaments were deposited on prestretched Lycra-knitted fabric using desktop-level FDM 3D printing technology to construct a three-layer structure of thermally responsive 4D textiles. Subsequently, the effects of different PLA thicknesses and Lycra knit fabric relative elongation on the permanent shape of thermally responsive 4D textiles were studied. Finally, a simulation program was written, and a case in this study demonstrates the usage of thermally responsive 4D textiles and the simulation program to design a wrist support product.

The constructed three-layer structure of PLA and Lycra knitted fabric can self-form under thermal stimulation. The material can also achieve reversible transformation between a permanent shape and multiple temporary shapes. Thinner PLA deposition and higher relative elongation of the Lycra-knitted fabric result in the greater curvature of the permanent shape of the thermally responsive 4D textile. The simulation program accurately predicted the permanent form of multiple basic shapes.

The proposed method enables 4D textiles to directly self-form upon thermal, which helps to improve the manufacturing efficiency of 4D textiles. The thermal responsiveness of the composite also contributes to building an intelligent human–material–environment interaction system.

Natural convection in finite enclosures is a common phenomenon in various thermal applications. To provide the thermal design guidelines, this study aims to numerically explore the potential of using internal baffles and nanofluids to either enhance or suppress heat transport in a vertical annulus. Furthermore, the annular-shaped enclosure is filled with aqueous-silver nanofluid and the effects of five distinct nanoparticle shapes are examined. In addition, the influence of baffle design parameters, including baffle position, thickness and length, is thoroughly analyzed.

The finite difference method is used in conjunction with the alternating direction implicit and successive line over relaxation techniques to solve nonlinear and coupled partial differential equations. The single phase model is used for nanofluid which is considered as a homogeneous fluid with improved thermal properties. The independence tests are carried out for assessing the sufficiency of grid size and time step for obtaining results accurately.

The baffle dimension parameters and nanoparticle shape exhibit significant impact on the convective flow and heat transfer characteristics, leading to the following results: sphere- and blade-shaped nanoparticles demonstrate around 30% enhancement in the heat transport capability compared with platelet-shaped nanoparticles, which exhibit the least. When considering the baffle design parameter, either a decrease in the baffle length and thickness or an increase in baffle height leads to an improvement in heat transport rate. Consequently, a threefold increase in baffle height yields a 40% improvement in thermal performance.

Understanding the impact of nanoparticle shapes and baffle design parameters on flow and thermal behavior will enable engineers to provide valuable insight on thermal management and overall system efficiency. Therefore, the current work focuses on exploring buoyant nanofluid flow and thermal mechanism in a baffled annular-shaped enclosure. Specifically, an internal baffle that exhibits conductive heat transfer through it is considered, and the impact of baffle dimensions (thickness, length and position) on the fluid flow behavior and thermal characteristics is investigated. In addition, the current study also addresses the influence of five distinct nanoparticle shapes (e.g. spherical, cylindrical, platelet, blade and brick) on the flow and thermal behavior in the baffled annular geometry. In addition to deepening the understanding of nanofluid behavior in a baffled vertical annulus, the current study contributes to the ongoing advancements in thermal applications by providing certain guidelines to design application-specific enclosures.

Unstructured data such as images have defied usage in property valuation for a long time. Instead, structured data in tabular format are commonly employed to estimate property prices. This study attempts to quantify the shape of land lots and uses the resultant output as an input variable for subsequent land valuation models.

Imagery data containing land lot shapes are fed into a convolutional neural network, and the shape of land lots is classified into two categories, regular and irregular-shaped. Then, the intermediate output (regularity score) is utilized in four downstream models to estimate land prices: random forest, gradient boosting, support vector machine and regression models.

Quantification of the land lot shapes and their exploitation in valuation led to an improvement in the predictive accuracy for all subsequent models.

The study findings are expected to promote the adoption of elusive price determinants such as the shape of a land lot, appearance of a house and the landscape of a neighborhood in property appraisal practices.

This paper aims to study the effect of concentric hot circular cylinder inside egg-cavity porous-copper nanofluid on natural convection phenomena.

The finite element method–based Galerkin approach is applied to solve numerically the set of governing equations with appropriate boundary conditions.

The effects of different range parameters, such as Darcy number (10–3 = Da = 10–1), Rayleigh number (103 = Ra = 106), nanoparticle volume fraction (0 = ϑ = 0.06) and eccentricity (−0.3 = e = 0.1) on the fluid flow represent by stream function and heat transfer represent by temperature distribution, local and average Nusselt numbers.

A comparison between oval shape and concentric circular concentric cylinder was investigated.

In the current numerical study, heat transfer by natural convection was identified inside the new design of egg-shaped cavity as a result of the presence of a circular inside it supported by a porous medium filled with a nanofluid. After reviewing previous studies and considering the importance of heat transfer by free convection inside tubes for many applications, to the best of the authors’ knowledge, the current work is the first study that deals with a study and comparison between the common shape (concentric circular tubes) and the new shape (egg-shaped cavity).

The purpose of this paper is to investigate the performance of Passive Direct Methanol Fuel Cell (PDMFC) experimentally using various Membrane Electrode Assembly (MEA) shapes such as square, rectangle, rhombus, and circle with equal areas and equal perimeters. The variation in MEA shape/size is achieved by altering gasket openings in the dynamic regions.

In the equal areas of MEA shapes, gasket opening areas of 1963.5 (+/−0.2) mm2 are used. Whereas in the equal perimeters of shapes, gasket opening perimeters of 157.1 (+/−0.2) mm are used. In this experimentation, Nickel-201 current collectors with 45.3% of circular openings are used on both the anode and cathode sides. The experiment is carried out at a 5 molar methanol concentration to find out the highest power density of the cell.

In the equal areas, among the shapes that are chosen for investigation, the square shape opening consisting of a perimeter of 177.2 mm has developed a maximum power density of 6.344 mWcm⁻² and a maximum current density of 65.2 mAcm⁻². Similarly, in equal perimeters, the rhombus shape opening with an area of 1400 mm2 has developed a maximum power density of 7.714 mWcm⁻² and a maximum current density of 85.3 mAcm⁻².

The novelty of this research work is instead of fabricating various shapes and sizes of highly expensive MEAs, the desired shapes and sizes of the MEA are achieved by altering gasket openings over dynamic regions to find out the highest power density of the cell.

Damage to reinforced concrete (RC) structural elements is inevitable. Such damage can be the result of several factors, including aggressive environmental conditions, overloading, inadequate design, poor work execution, fire, storm, earthquakes etc. Therefore, repairing and strengthening is one way to improve damaged structures, so that they can be reutilized. In this research, the use of an ultra high-performance fibre-reinforced concrete (UHPFRC) layer is proposed as a strengthening material to rehabilitate damaged-RC beams. Different strengthening schemes pertaining to the structural performance of the retrofitted RC beams due to the flexural load were investigated.

A total of 13 normal RC beams were prepared. All the beams were subjected to a four-point flexural test. One beam was selected as the control beam and tested to failure, whereas the remaining beams were tested under a load of up to 50% of the ultimate load capacity of the control beam. The damaged beams were then strengthened using a UHPFRC layer with two different schemes; strip-shape and U-shape schemes, before all the beams were tested to failure.

Based on the test results, the control beam and all strengthened beams failed in the flexural mode. Compared to the control beam, the damaged-RC beams strengthened using the strip-shape scheme provided an increase in the ultimate load capacity ranging from 14.50% to 43.48% (or an increase of 1.1450 to 1.4348 times), whereas for the U-shape scheme beams ranged from 48.70% to 149.37% (or an increase of 1.4870–2.4937 times). The U-shape scheme was more effective in rehabilitating the damaged-RC beams. The UHPFRC mixtures are workable, as well easy to place and cast into the formworks. Furthermore, the damaged-RC beams strengthened using strip-shape scheme and U-shape scheme generated ductility factors of greater than 4 and 3, respectively. According to Eurocode8, these values are suitable for seismically active regions. Therefore, the strengthened damaged-RC beams under this study can quite feasibly be used in such regions.

Observations of crack patterns were not accompanied by measurements of crack widths due to the unavailability of a microcrack meter in the laboratory. The cost of the strengthening system application were not evaluated in this study, so the users should consider wisely related to the application of this method on the constructions.

Rehabilitation of the damaged-RC beams exhibited an adequate structural performance, where all strengthened RC beams fail in the flexural mode, as well as having increment in the failure load capacity and ductility. So, the used strengthening system in this study can be applied for the building construction in the seismic regions.

Aside from equipment, application of this strengthening system need also the labours.

The use of sand blasting on the surfaces of the damaged-RC beams, as well as the application of UHPFRC layers of different thicknesses and shapes to strengthen the damaged-RC beams, provides a novel innovation in the strengthening of damaged-RC beams, which can be applicable to either bridge or building constructions.