Search results

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

The supply chain (SC) of the fast-moving consumer goods (FMCG) sector in India witnessed a significant change soon after introducing the Goods and Services Tax (GST). With the initiation of this tax, companies started moving from individual state-wise warehouses to consolidation warehouses model to save costs. This paper proposes a model that frames a mathematical formulation to optimize the distribution network in the downstream SC by considering the complexities of multi-product lines, multi-transport modes and consolidated warehouses.

The model is designed as mixed-integer linear programming (MILP), and an algorithm is developed that works on the feedback loop mechanism. It optimizes the transportation and warehouses rental costs simultaneously with impact analysis.

Total cost is primarily influenced by the critical factor transportation price rather than the warehouse rent. The choice of warehouses at prime locations was a trade-off between a lower distribution cost and higher rent tariffs.

The study enables FMCG firms to plan their downstream SC efficiently and to be in line with the recent trend of consolidation of warehouses. The study will help SC managers solve complexities such as multi-product categories, truck selection and consolidation warehouse selection problems and find the optimum value for each.

The issues addressed in the proposed work are transporting products with different sizes and weights, selecting consolidated warehouses, selecting suitable vehicles for transportation and optimizing distance in the distribution network by considering consolidated warehouses.

The purpose of this systematic review is to critically analyze pharmaceutical industry case studies on the implementation of Lean 4.0 methodologies to synthesize key lessons, benefits and best practices. The goal is to inform decisions and guide investments in related technologies for enhancing quality, compliance, efficiency and responsiveness across production and supply chain processes.

The article utilized a systematic literature review (SLR) methodology following five phases: formulating research questions, locating relevant articles, selecting and evaluating articles, analyzing and synthesizing findings and reporting results. The SLR aimed to critically analyze pharmaceutical industry case studies on Lean 4.0 implementation to synthesize key lessons, benefits and best practices.

Key findings reveal recurrent efficiency gains, obstacles around legacy system integration and data governance as well as necessary operator training investments alongside technological upgrades. On average, quality assurance reliability improved by over 50%, while inventory waste declined by 57% based on quantified metrics across documented initiatives synthesizing robotics, sensors and analytics.

As a comprehensive literature review, findings depend on available documented implementations within the search period rather than direct case evaluations. Reporting bias may also skew toward more successful accounts.

Synthesized implementation patterns, performance outcomes and concealed pitfalls provide pharmaceutical leaders with an evidence-based reference guide aiding adoption strategy development, resource planning and workforce transitioning crucial for Lean 4.0 assimilation.

This systematic assessment of pharmaceutical Lean 4.0 adoption offers an unprecedented perspective into the real-world issues, dependencies and modifications necessary for successful integration, absent from conceptual projections or isolated case studies alone until now.

Despite its crucial role in ensuring food safety, traceability remains underutilized by small and medium-sized enterprises (SMEs), a vital component of China’s agricultural supply chain, thereby compromising the integrity of the supply chain traceability system. Therefore, this study sets out to explore the factors influencing SMEs’ adoption of traceability systems and the impact of these factors on SMEs’ intent to adopt such systems. Furthermore, the study presents a model to deepen understanding of system adoption in SMEs and provides a simulation demonstrating the evolutionary trajectory of adoption behavior.

This study considers the pivotal aspects of system adoption in SMEs, aiming to identify the influential factors through a grounded theory-based case study. Concurrently, it seeks to develop a mathematical model for SMEs’ adoption patterns and simulate the evolution of SMEs’ adoption behaviors using the Q-learning algorithm.

The adoption of traceability among SMEs is significantly influenced by factors such as system attributes, SMEs’ capability endowment, environmental factors and policy support and control. However, aspects of the SMEs’ capability endowment, specifically their learning rate and decay rate, have minimal impact on the adoption process. Furthermore, group pressure can expedite the attainment of an equilibrium state, wherein all SMEs adopt the system.

This study fills the existing knowledge gap about the adoption of traceability by SMEs in China’s agricultural supply chain. This study represents the pioneer study that identifies the factors influencing SMEs’ adoption and examines the effects of these factors on their traceability adoption, employing a multi-methodological approach that incorporates grounded theory, mathematical modeling and the Q-learning algorithm.

This paper aims to assess the readiness of retail workers to use blockchain technology (BCT) to improve supply chain performance. The assessment was made via a quantitative approach taken using a theoretical framework based on Keller’s motivation model and self-determination theory in the BCT context.

The authors collected data from 567 retail workers from an emerging country through a structured survey questionnaire. The authors tested the hypotheses of the proposed model using Warp PLS 7.0 and controlled firm age, industry type and technological intensity.

Our findings may help firms in making the process of digital transformation inclusive. The authors found that supplier-based attention and motivation through BCT lead to supply chain performance, and that supplier-based satisfaction and trust achieved through BCT positively impact supply chain performance. Further, supplier-based relevance on raw material selection with the higher trust and motivation levels achieved through BCT was found to have a positive impact on supply chain performance.

IT supply chain applications are referred to as “lean” rather than “rich” because they still rely mainly on written and numerical means to present data. When the environment is less ambiguous, then less rich media can be used to facilitate communication. IT supply chain applications allow suppliers to spend time building relationships with other suppliers instead of focusing on administrative tasks, thus enhancing such relationships.

This study can be considered the first to assess retailer readiness to use BCT to improve supply chain performance through the theoretical lens of Keller’s motivation model and self-determination theory.

Design Science (DS) is a relatively new paradigm for addressing complex real-world problems through the design and evaluation of artifacts. Its constituent methodologies are currently being discussed and established in numerous related research fields, such as information systems and management (Hevner et al., 2004). However, a DS methodology that describes the “how to” is largely lacking, not only in the field of OM but in general. The Theory of Constraints (TOC) and its underlying thinking processes (TP) have produced several novel artifacts for addressing ill-structured real-world operations problems (Dettmer, 1997; Goldratt, 1994), but they have not been analyzed from a DS research standpoint. The purpose of this research is to demonstrate how TOC’s thinking process methodology can be used for conducting exploratory DS research in Operations and Supply Chain Management (OSCM).

A case study of spare parts replenishment illustrates the use of TOC’s thinking processes in DS to structure an initially unstructured problem context and to facilitate the design of a novel solution.

TOC’s thinking processes are an effective methodology for problem-solving DS research, enabling the development of novel solutions in initially unstructured and wicked problem situations. Combined with structured CIMO design logic TOC’s thinking process offers a systematic method for exploring wicked problems, designing novel solutions, and demonstrating theoretical contributions.

The implication for research is that TOC’s thinking process methodology can provide important elements of the lacking “how to” methodology for DS research, not only for the field of OM but in general for the field of management.

The practical outcome of the research is a novel design for dynamic buffer-based replenishment that extends beyond organizational boundaries.

This work shows how the thinking processes can be used in DS research to develop rigorous design propositions for ill-structured problems.

COVID-19 has occurred in more than 150 countries and causes a huge impact on the health of many people. The main purpose of this work is, COVID-19 has occurred in more than 150 countries and causes a huge impact on the health of many people. The COVID-19 diagnosis is required to detect at the beginning stage and special attention should be given to them. The fastest way to detect the COVID-19 infected patients is detecting through radiology and radiography images. The few early studies describe the particular abnormalities of the infected patients in the chest radiograms. Even though some of the challenges occur in concluding the viral infection traces in X-ray images, the convolutional neural network (CNN) can determine the patterns of data between the normal and infected X-rays that increase the detection rate. Therefore, the researchers are focusing on developing a deep learning-based detection model.

The main intention of this proposal is to develop the enhanced lung segmentation and classification of diagnosing the COVID-19. The main processes of the proposed model are image pre-processing, lung segmentation and deep classification. Initially, the image enhancement is performed by contrast enhancement and filtering approaches. Once the image is pre-processed, the optimal lung segmentation is done by the adaptive fuzzy-based region growing (AFRG) technique, in which the constant function for fusion is optimized by the modified deer hunting optimization algorithm (M-DHOA). Further, a well-performing deep learning algorithm termed adaptive CNN (A-CNN) is adopted for performing the classification, in which the hidden neurons are tuned by the proposed DHOA to enhance the detection accuracy. The simulation results illustrate that the proposed model has more possibilities to increase the COVID-19 testing methods on the publicly available data sets.

From the experimental analysis, the accuracy of the proposed M-DHOA–CNN was 5.84%, 5.23%, 6.25% and 8.33% superior to recurrent neural network, neural networks, support vector machine and K-nearest neighbor, respectively. Thus, the segmentation and classification performance of the developed COVID-19 diagnosis by AFRG and A-CNN has outperformed the existing techniques.

This paper adopts the latest optimization algorithm called M-DHOA to improve the performance of lung segmentation and classification in COVID-19 diagnosis using adaptive K-means with region growing fusion and A-CNN. To the best of the authors’ knowledge, this is the first work that uses M-DHOA for improved segmentation and classification steps for increasing the convergence rate of diagnosis.

By following the “employee-centric” approach, this study aims at identifying the impact of high-performance work systems (HPWS) on specific employee attitudinal outcomes such as work engagement, job satisfaction and affective commitment in the Indian healthcare industry.

The target population for this study includes the nurses working in large private multi-specialty tertiary care hospitals in India. Partial Least Squares Structural Equation Modelling (PLS-SEM) techniques are used on a sample of 152 nurses working in two large specialty hospitals.

In the Indian healthcare industry context, the nurse's perception of HPWS has shown a significant positive effect on their attitudinal variables such as work engagement, job satisfaction and affective commitment. When checked for mediation of work engagement and job satisfaction variables in HPWS – affective commitment relationship, nurse's job satisfaction partially mediated the relationship, but nurse's work engagement has shown no mediation effect.

This is one of the pioneering studies conducted in the Indian healthcare industry context, especially on the nurse's sample in identifying the impact of high-performance work systems on their attitudinal outcomes. Underscoring the paucity of HPWS research in the Indian healthcare industry, this study's findings will be an addition to the HPWS literature and also to the nursing research in the Indian healthcare settings.

The purpose of this study is to capture patients' and employees' perception of quality of care in the Indian private hospitals and to find the possible perceptual gaps between both the groups.

Authors have referred to the Victorian patient satisfaction monitoring (VPSM) scale and studied the responses of 327 patients and 327 employees collected from six private Indian tertiary care hospitals. SPSS v26 software was used to conduct the data reliability test, descriptive analysis and Mann–Whitney U test.

Authors have found significant differences in perceptions of quality of care between the patients and employees in the Indian hospitals. Employees have high positive perceptions towards the provided medical care whereas the patients have less favourable perceptions for many quality indicators.

This study findings help the healthcare managers, practitioners and healthcare workers of the Indian hospitals to understand the perceptions of both the employees and the patients towards healthcare quality elements and help to reduce the existing perceptual gap in the process of providing quality healthcare services.

To the best of authors knowledge, this is one of the pioneering studies conducted in Indian healthcare industry to capture and compare the perceptions of both the employees' and the patients' perceptions of various quality of care elements. This study highlighted the existing perceptual gap between the employees and the patients on various healthcare quality elements and indicated the critical areas for improvement to provide high quality healthcare services.

This study aims to determine the barriers hindering the incorporation of blockchain technology (BCT) in two key service industries – hotel and health care – as well as to assess their readiness for implementing BCT after overcoming the barriers.

The barriers of this study are determined through two phases: a review of prior literature and obtaining expert opinions, which are then analyzed to identify specific barriers that are impeding the incorporation of BCT. Moreover, to generate a blockchain implementation reluctance index (BIRI), this study presents an interval-valued intuitionistic fuzzy set (IVIFS) that uses graph theory and matrix approach (GTMA). The permanent function in the GTMA approach is computed using the PERMAN algorithm. Finally, to compare the readiness of the hotel and health-care industries to adopt BCT, the BIRI values are plotted and evaluated.

The barriers identified by this study are listed under five major headings, namely, financial, operational, behavioral, technical and legal. This study revealed that the operational and technical barriers of BCT are critically hindering its widespread integration in hotel and health-care industries. Furthermore, on comparing the BIRI values of both industries, the result suggested that the hotel industry needs to work more on these barriers to effectively incorporate BCT. Besides the comparison, the BIRI values clearly indicate that both industries have to put a lot of effort into the mitigation of the barriers found by this study to successfully integrate BCT.

The experts’ opinions are used to evaluate the identified barriers, which raises the chance that the opinions are prejudiced based on the experts’ perspectives and ideologies. The sensitivity of decision-maker loads toward preference outcomes is not analyzed in this manuscript. Therefore, any recent sensitivity analysis may be considered a prospective field for future research. This study applies a multicriteria decision-making (MCDM) approach, IVIFS–GTMA, which limits the evaluation of the influence caused by individual barriers on the integration of BCT in the hotel and health-care industries. Henceforth, in future investigations, alternative MCDM methods may be used to analyze individual barriers.

According to the findings, if the hotel or health-care industry aims to incorporate BCT in its supply chain operations, it is recommended to emphasize more on the operational barriers along with the technical and behavioral barriers. The barriers mentioned in this manuscript can be used as guidance for developers in their development activities, such as scalability concerns, establishment costs, the 51% attack and the inefficient nature of BCT. Furthermore, they may address the potential users’ negative perceptions about security, privacy, trust and risk avoidance through creatively developed blockchain solutions to promote BCT implementation.

To the best of the author’s knowledge, this is the first study that identifies barriers toward BCT incorporation in the major service industries, i.e. hotel and health care. Moreover, this is the first study that compares the preparedness of the hotel and health-care industries to determine the industry that requires more work to implement BCT.