Search results

This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.

The research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.

The research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.

The research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.

The research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.

The research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.

Successful project delivery for sustainable building construction (SBC) has been linked to certain features. Previous studies have emphasised the need to improve SBC practice in South Africa. The purpose of this study is to explore the SBC features for project delivery in South Africa.

A structured questionnaire elicited the primary data from 281 built environment professionals, mainly in South Africa’s Gauteng province. Descriptive and inferential statistics were used for the data analysis. This study used the principal component analysis technique to ascertain the principal SBC features.

Three components of SBC features, namely, sustainable resource use and compliance, sustainable waste minimisation and recycling and sustainable designs and materials, were developed from the principal component analysis. The factor loadings of the constituent variables ranged from 0.570 to 0.836. The reliability of each component was evaluated, and the results were 0.966, 0.931 and 0.913.

The revelations from this study will aid the decision-making of the relevant stakeholders towards establishing improvement initiatives and mitigating the reluctance to shift from conventional building methods and poor knowledge sharing of SBC benefits.

This is one of the most recent South African studies that sheds light on the components of a successful SBC deployment. The findings of this study added to knowledge by confirming three fundamental features of SBC. This study recommends adequately considering the principal features for successful SBC project delivery in South Africa.

The circular economy business models (CEBMs) provide ways for firms operating in the construction industry to move from a linear to a circular approach. Thus, this study aims to explore CEBM research within the construction sector to show the focus area of studies, highlighting new areas that require attention.

This study adopted a bibliometric approach, using the Scopus database as the data source. The keywords used for paper extraction from the database were “circular economy business” OR “circular business” AND “model” OR “models” AND “construction industry” OR “building industry”. The VOSviewer software was then used to prepare a co-occurrence and co-authorship map based on the bibliographic data gathered.

The study’s findings reveal five research clusters in the construction industry. These clusters include circular construction intelligence, modular business modelling, eco-construction, sustainable construction economics and smart energy-efficient buildings. The two most cited scholars had two publications each, while the top journals are the Journal of Cleaner Production and Sustainable Production and Consumption. This study concludes that there is a need for research within the construction sector to focus on CEBMs’ archetypes and frameworks. This will enable a smooth transition from linear to circular business models in the sector.

The information was gathered from a single database, Scopus; hence, using other databases, including Web of Science, Google Scholar and Dimensions, might produce more articles for examination and, consequently, different findings on the subject under investigation.

These findings would assist researchers in considering the areas mentioned, which are yet to receive attention, and, by extension, enhance economic development while maintaining environmental sustainability.

This paper made a significant contribution to the body of knowledge by identifying scholars and platforms that have been instrumental in advancing CEBM research and highlighting new areas that require attention in the construction sector.

This article sets out to show how principles and questions about method that underlie a way of interpreting the discipline of conservation and restoration can find results in research and studies, aiming at achieving even conscious reuse process. The occasion is the very recent research performed on the former Church of Saints Gerolamo and Francesco Saverio in Genoa, Italy, the Jesuit church annexed to the 17th-century College of the order. It is a small Baroque jewel in the heart of the ancient city, former University Library and actually abandoned, forgotten for years, inaccessible and awaiting a new use.

The two-year work carried out on the monumental building was conducted according to a study and research methodology developed and refined over the years within the activities of the School of Specialisation in Architectural Heritage and Landscape of the University of Genoa. It is a multidisciplinary and rigorous approach, which aims to train high-level professionals, up-to-date and aware of the multiple problems that interventions on existing buildings, especially of a monumental nature, involve.

The biennal study has been carried out within the activities of the Post-Graduate Programme in Architectural Heritage and Landscape of the University of Genoa. The work methodology faces the challenges of the contemporary complexity, raised by the progressive broadening of the concept of cultural “heritage” and by the problems of its conservation, its active safeguard and its reuse: safety in respect of seismic risk, fire and hydro geological instability, universal accessibility – cognitive, physical and alternative – resource efficiency, comfort and savings in energy consumption, sustainability, communication and involvement of local communities and stakeholders.

The goals of the work were the following: understanding of the architectural heritage, through the correlated study of its geometries, elements and construction materials, surfaces, structures, spaces and functions; understanding of the transformations that the building has undergone over time, relating the results of historical reconstructions from indirect sources and those of direct archaeological analysis; assessment of the state of conservation of the building recognising phenomena of deterioration, damage, faults and deficits that affect materials, construction elements, systems and structures; identification of the causes and extent of damage, faults and deficits, assessing the vulnerability and level of exposure of the asset to the aggression of environmental factors and related risks; evaluation of the compatibility between the characteristics of the available spaces, the primary needs of conservation, the instance of regeneration and possible new uses; the definition of criteria and guidelines for establishing the planning of conservation, restoration and redevelopment interventions.

Super-tall towers have surfaced as a pragmatic remedy to meet the escalating requisites for both residential and commercial areas and to stimulate economic growth in the Middle East. In this unique regional context, optimizing spatial usage stands as a paramount consideration in the architectural design of skyscrapers. Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

The research methodology utilized in this paper adopts a case study approach to accumulate data regarding super-tall towers in the Middle East, with a specific focus on investigating space efficiency. A total of 27 super-tall tower cases from the Middle East were encompassed within the analytical framework.

Key findings can be succinctly summarized as follows: (1) average space efficiency was 75.5%, with values fluctuating between a minimum of 63% and a maximum of 84%; (2) average ratio of the core area to the gross floor area (GFA) registered 21.3%, encompassing a spectrum ranging from 11% to 36%; (3) predominantly, Middle Eastern skyscrapers exhibited a prismatic architectural form coupled with a central core typology. This architectural configuration mostly catered to residential and mixed-use functions; (4) the combination of concrete and outrigger frame systems was the most frequently utilized; (5) as the height of the tower increased, space efficiency tended to experience a gradual decline and (6) no significant discernible disparities were detected in the impact of diverse load-bearing systems and architectural forms on space efficiency.

Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

One of the greatest challenges faced by the 1994 post-apartheid government in South Africa is the housing problem that has persisted for almost 30 years into democracy. Innovation in research and practice is required to address this problem. This paper aims to discuss the aforementioned objective.

This paper presents an argument for housing knowledge management as one part of a much larger system of housing provision and critically compares information variations on one hypothetical, low-cost housing unit adapted for varying climatic regions. It aims to enquire if there is an overlap in information.

The findings do confirm a noteworthy overlap in the information of the varying units. Therefore, knowledge management of the information would prove effective and may contribute in part to housing provision.

The study is limited to assessing the information changes made to the contract documentation of the housing unit.

The paper argues that knowledge management of this overlapping information could impact housing provision by providing knowledge power to those affected by the housing problem.

The findings are a unique perspective presented through a knowledge management lens. In addition, the said knowledge management lens provides a platform to raise additional questions. When seeking answers to these questions, it is expected that research sub-themes would be identified focussing further research studies towards finding answers.

Housing interventions carried out in accordance with current regulations in the Old City of Aleppo, both before and after the Syrian war, are minor in comparison to those carried out without a license and illegally. This suggests current policies are inadequate and needs upgrading.

This article critically reviews current Syrian policies and their implementation on residential heritage in the Old City of Aleppo with the aim to identify gaps and propose directions for modifications. Next to a review of the text of official policies and implementation documents, the archive of the Directorate of the Old City has been consulted and license applications, presented in the period 2018–2022, have been examined. Moreover, interviews with decision-makers from academics and practice were conducted.

Major limitations of these policies and relative application procedures have been identified: these involve: legal/administrative, economic and social aspects.

The specific needs have been highlighted and some proposals for improvement made.

With more cities aiming to achieve climate neutrality, identifying the funding to support these plans is essential. The purpose of this paper is to exploit the present of a structured green bonds framework in Sweden to investigate the typology of abatement projects Swedish municipalities invested in and understand their effectiveness.

Marginal abatement cost curves of the green bond measures are constructed by using the financial and abatement data provided by municipalities on an annual basis.

The results highlight the economic competitiveness of clean energy production, measured in abatement potential per unit of currency, even when compared to other emerging technologies that have attracted the interest of policymakers. A comparison with previous studies on the cost efficiency of carbon capture storage reveals that clean energy projects, especially wind energy production, can contribute to the reduction of emissions in a more efficient way. The Swedish carbon tax is a good incentive tool for investments in clean energy projects.

The improvement concerning previous applications is twofold: the authors expand the financial considerations to include the whole life-cycle costs, and the authors consider all the greenhouse gases. This research constitutes a prime in using financial and environmental data produced by local governments to assess the effectiveness of their environmental measures.

There is a limited number of research work on critical success factors (CSFs) in public construction projects in Saudi Arabia. In response to this knowledge gap, the objective of this paper is to assess the impact of CSFs on the government construction projects in Saudi Arabia. The success factors are investigated from a broader consideration of failure criteria, from consideration of most effectiveness in successful project completion and also from consideration of the impact of implementing control processes for successful project completion.

This study has analysed the impact of success factors on construction projects in Saudi Arabia using a descriptive methodology. An exhaustive literature survey is undertaken to identify the success and failure factors related to government construction projects in Saudi Arabia. The survey data are sorted out and analysed by cost, schedule, technical, context and finance dimensions of the projects based on project types, engineering complexity, size, modality, jurisdictional control and funding approach. To evaluate the influence of success factors implementation, qualitative data were collected in a survey via a web-based questionnaire that was sent to officials working and occupying a responsible position in national project guidelines organizations and in government construction organizations in Saudi Arabia. In all, 28 CSFs were identified, ranked and evaluated for their impact on project success. The four identified factors belong to process categories of construction projects, nine factors belong to management of construction projects and 15 success factors are identified for impact assessment of implementation in construction projects.

The study's findings have identified and ranked the top five CSFs that significantly influence project outcomes, including meeting time targets, adhering to financial budgets, delivering desired outcomes for all stakeholders, effectively managing risks and assembling the appropriate team while optimizing resource allocation. Additionally, the research indicates that hindrances to projects primarily stem from execution, economic, human and political factors. The study advocates for strict controls over incomplete engineering designs and advises against contractors independently handling design work to ensure project success. Additionally, addressing contractors' qualifications and financial matters is crucial for project success. By highlighting these CSFs and challenges, the research provides actionable insights to enhance project management practices in the construction industry.

This study is limited to the infrastructure projects constructed by governmental bodies with the participation of officials from government organizations. Further study, including private projects and officials working on private projects, may be needed to generalized the research outcome.

Numerous studies have investigated CSFs in construction projects, but few have examined their relevance to Saudi Arabian government projects. This study aims to fill this gap by identifying key CSFs specific to Saudi Arabian public sector construction projects and assessing their impact on project success. It advocates for stringent controls in the Saudi Arabian construction sector, emphasizing the importance of preventing incomplete or altered engineering designs by contractors to increase the success rate of public sector projects. This research offers practical insights to stakeholders, advancing project management practices in Saudi Arabia's construction sector for improved outcomes and resource utilization.

Sandbag building technologies (SBTs) have been offered as a cost-effective and sustainable alternative building technology (ABT) capable of accelerating house construction in South Africa, but its acceptance remains low. However, knowledge about how to effectively improve SBT social acceptance is limited. This study aims to develop and prioritise SBT social acceptability strategies towards providing a comprehensive framework for the successful deployment and widespread adoption of sandbag technology.

This study used a quantitative research strategy that included a literature review and a structured questionnaire survey of 228 ABT professionals and stakeholders in the South African housing industry. The study statistically analysed 13 strategies for the social acceptance of SBT.

The analysis showed that the top three strategies include the availability of sandbag demonstration projects in all provinces, the approval of a sandbag building code and the availability of standard design methods for earthbags. A factor analysis clustered the 13 strategies into Stakeholders integration and policy formation, Effective education and knowledge sharing and Grassroots advocacy and incentives.

The current study’s findings provide a broad framework for the effective implementation and wide acceptance of sandbag technology in housing projects. It offered certain best practices that policymakers and practitioners might use to promote ABT and SBT societal acceptability.

To the best of the authors’ knowledge, the study represents the first and only attempt to investigate the viewpoints of experts and housing market stakeholders in South Africa regarding sandbag technology social acceptance strategies and contributes to the social acceptance body of knowledge in ABT and SBT.