Search results

Information about Volkswagen’s human and animal testing was obtained from the secondary sources cited.

In 2014, Volkswagen (VW), BMW and Daimler funded an institute to conduct research to support their position that diesel engines are cleaner and safer than other fuel alternatives. One of the research studies conducted by the institute examined the effects of diesel fumes on humans and monkeys. Researchers put ten macaque monkeys in sealed rooms and pumped in exhaust fumes from a Volkswagen Beetle for four hours. For comparison, another group of monkeys was exposed to fumes from an older Ford pickup. The monkeys were later anesthetized and examined to see what the fumes did to their bodies. Other tests involved willing human subjects who were exposed to similar conditions.

This case is applicable to upper-level management or business ethics class.

This case is suitable for graduate-level quantitative analysis, business and government, environment and sustainability, and global economics courses. Students must consider the tradeoffs between continuing to run an old coal-burning plant and purchasing emissions allowances (EAs) versus upgrading to emissions-reducing wet or dry scrubbers. Reducing emissions creates the possibility of selling the plant's surplus EAs (which are likely to increase in price). Choosing a wet or dry scrubber requires considering installation cost and construction time, variable cost, and SO2 removal efficiency. Ideally, the investment should pay back over time, but management believes some net investment could also be justified. For that, however, complete analyses from both economic and environmental perspectives are required. A supplemental spreadsheet is available to accompany the case (UVA-QA-0726X).

East Texas Oxygen (ETOX) delivered high-pressure cylinders of gases such as oxygen and nitrogen to twelve wholly-owned branches scattered throughout East Texas and Louisiana. Employees loaded and unloaded individual high-pressure cylinders off of and onto trailers manually and the firm had never had a related accident. Robert Jenkins had been challenged to decrease the cost of supplying the branches with cylinders and other supplies. He was considering recommending the palletization of delivery operations which required numerous changes within the organization. This case required students to determine the best routing for the delivery truck(s) and to determine whether or not the number of trucks and drivers could be reduced under palletization. Students were then required to do a capital budgeting analysis and make a recommendation of whether or not to palletize.

MBA students Tim Joyce and Brandon Cornuke had what they believed was a great product concept: a body powder that could be delivered in an aerosol spray. Current market-leading powders such as Gold Bond and Johnson's Baby Powder involved messy application, as they were only available in “dump-on” form. Worse, because powders deposited on top of the skin didn't adhere to it, they tended not to last long. Joyce and Cornuke believed an aerosol powder spray would solve these problems. They called their product concept Dry Goods. However, taking Dry Goods from idea to reality presented some serious challenges. How would two students without access to a lab be able to research and develop a complex chemical/physical process like aerosol delivery, let alone manufacture it once they had a proven prototype? To address these problems, the two entrepreneurs sought out a contract manufacturing partner. After identifying a number of options, Joyce and Cornuke had to decide which partner offered them the best chances of success, given their goals and financial constraints.

Students will learn about the process of hiring a contract manufacturing partner to produce a new packaged good for a startup.

CF Industries’ products nitrogen fertilizers are a crucial input to making agriculture productive enough to feed the world. However, its products are undifferentiated commodities. Throughout parts of its history, CF has struggled to be consistently profitable, yet over the last decade it has been very profitable. The case provides an opportunity to examine how CF manages to create value and capture it as profits despite being in a commodity business.

The following theoretical concepts are applicable to the case and its learning objectives: Stakeholder Power-Interest Matrix and Carroll’s Pyramid of Corporate Social Responsibility.

Information was obtained in three separate interviews with PSEG. In February 2018, an introductory phone conference was conducted with a number of senior managers within PSEG, including the Director of Development and Strategic Issues, Kate Gerlach. In April 2018, an onsite interview was conducted with Gerlach, who connected the author with Scott Jennings. A phone interview was conducted with Scott Jennings in May 2018 and follow-up communication with him was handled via e-mail. The information obtained from these interviews was supplemented by material obtained from secondary sources. None of the information in the case has been disguised.

Scott Jennings, a Vice President at PSEG, the diversified New Jersey-based energy company, was the project leader for a large commercial wind farm that was to be built off the coast. The project, Garden State Offshore Energy, a joint venture between PSEG and Deepwater Wind, an experienced developer of offshore wind projects, had been announced over six years earlier, in late 2008. In the time that had passed, the Garden State Offshore Energy project team had waited for the New Jersey Bureau of Public Utilities, which had been tasked by Governor Chris Christie to evaluate the project costs before it could authorize the actual construction of the wind turbines. Justifying the project on a cost basis proved to be difficult; despite the growing public sentiment in favor of projects that utilized renewable energy sources such as wind power, the Garden State Offshore Energy team was unable to move the project forward. Scott needed to decide whether it made sense to continue to hold regular meetings with the Garden State Offshore Energy team. Scott’s colleagues suggested that Scott speak with senior management at PSEG to find out if the resources that had been dedicated to the Garden State Offshore Energy project could be shifted to other projects that might be more feasible.

This case is suitable for courses in Sustainability. It is appropriate to use the case in undergraduate courses to illustrate decision making in a regulated industry. Sufficient information is presented in the case to debate both sides of the offshore wind authorization issue.

Mr. Sajjan Jindal, MD of JVSL (nos JSW) wanted to bring the latest technology of iron making into India. His project went to several cost overrun and time overrun due to several foreseen and unforessen circumstances. This case discusses the issues new technology introduction in iron making area, problem faced by inexperienced contractor. It shows the need for proper risk management is required. It also shows the criticality of the project does not mean time cost trade off, but many other factors like reliability of the equipment, process and reliability of the equipment and plants.

The case deals with comparison of two events namely Bhopal Gas Tragedy and BP Oil Spill Tragedy. Specifically, the case compares the negotiation process and its outcome. In other words, the case compares how negotiation was carried out on behalf of victims of these tragedies and resulted in optimal outcomes in one situation and sub-optimal outcomes in another situation. It case also provides insights into cross-cultural issues in negotiation process as one of the events took place in emerging economy (India) and other one in a developed economy (USA). The case gives insight for individuals on how handle communication process during the course of negotiation.

Financial management, corporate finance, strategic management, managerial accounting and project management.

The case is suitable for courses such as MBA, Bachelor level business courses (in finance, business strategy) and training programs for working executives.

The case study deals with financial and strategic appraisal of a unique coal-to-liquid project. India imported about two thirds of its crude oil requirements resulting in huge outflow of precious foreign exchange. As a result, it became necessary for the country to look for alternative sources of energy. The coal-to-liquid (CTL) technology of coal gasification offers a credible alternative source of fuels as proved by Sasol of South Africa. The Government of India short-listed Global Synfuels Company (name changed) as one of the selected few companies to build a CTL project. While the project is strategically important to the company and highly desirable for the country, there are serious doubts about the commercial viability of the project because of which the company is in dilemma whether to go ahead with the project. The case study presents this decision dilemma in a very interesting way and will be useful for teaching courses in corporate finance and strategic management.

The case can be used to engage participants to make a SWOT analysis for a new business opportunity, discuss environmental and financial issues facing a company, use DCF techniques to evaluate the project viability, carry out scenario analysis of the project to the changes in variables as well as challenge the participants to generate strategies for the success of a new project. Participants would also develop a better understanding of: environmental issues involved in CTL projects and new technologies to deal with such issues; and the employment impact of large projects such as the CTL.

Teaching notes are available; please consult your librarian for access.

Paula Hendricks, Director of Marketing for Rapid Reel Lawn Master Company (RRLMC), tasked with developing a plan to exploit the current trend in lawn mower purchasing patterns must craft a strategic proposal for the executive planning committee. RRLMC, a manufacturer of reel mowers, experienced an increase in sales due to a confluence of factors: high gasoline prices, increased concern with the environment, the trend toward smaller yards and a focus on health and exercise. Paula needed to develop a plan for the company to sustain the bonanza and determine whether this trend offered new opportunities for marketing.

The data for the case were collected through examination of a major reel lawn mower manufacturer in the USA, through experience teaching and using the market segmentation process, as well as personal interviews and secondary research on the history of firms within the industry. The results of a literature review have been incorporated to flesh out the discussion.

This case is targeted primarily at undergraduate students in upper-level marketing classes, e.g., Relationship Marketing, Marketing Management and Strategic Marketing. Additionally, it can be used in management classes (e.g. Strategic Management) where industry segmentation is discussed. It would also benefit introductory MBA marketing courses as this case directs students’ attention to the role of products’ perceived benefits and how markets may be segmented in order to assess and select prime segments of the market for targeting.