Search results

The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment. Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of interfacial layer was different due to the different mechanism of element diffusion of the two substrates. The PC Ni substrate mainly provided Ni atoms through grain boundary diffusion. The Ni₃Sn₄ phase of the Sn0.05Ni/PC Ni joint was finer, and the diffusion flux of Sn and Ni elements increased, so the Ni₃Sn₄ layer of this joint was the thickest. The SC Ni substrate mainly provided Ni atoms through the lattice diffusion. The Sn0.1Ni/SC Ni joint increases the number of Ni atoms at the interface due to the doping of 0.1Ni (wt.%) elements, so the joint had the thickest NiSn₄ layer.

The effects of doping minor Ni on the microstructure evolution of an Sn-xNi (x = 0, 0.05 and 0.1 Wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment was investigated in this study.

Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of the interfacial layer was different due to the different mechanisms of element diffusion of the two substrates.

In this study, the effect of doping Ni on the growth and formation mechanism of IMCs of the Sn-xNi/Ni (single-crystal) solder joints (x = 0, 0.05 and 0.1 Wt.%) was investigated.

FOV splicing optical remote sensing instruments have a strict requirement for the focal length consistency of the lens. In conventional optical-mechanical structure design, each optical element is equally distributed with high accuracy and everyone must have a high machining and assembly accuracy. For optical remote sensors with a large number of optical elements, this design brings great difficulties to lens manufacture and alignment.

Taking the relay lens in an optical remote sensing instrument with the field of view splicing as an example, errors of the system are redistributed to optical elements. Two optical elements, which have the greatest influence on modulation transfer function (MTF) of the system are mounted with high accuracy centering and the other elements are fixed by gland ring with common machining accuracy. The reduction ratio consistency difference among lenses is compensated by adjusting the optical spacing between the two elements.

Based on optical system simulation analysis, the optimized structure can compensate for the difference of reduction ratio among lens by grinding the washer thickness in the range of ±0.37 mm. The test data for the image quality of the lens show that the MTF value declined 0.043 within ±0.4 mm of space change between two barrels. The results indicate that the reduction ratio can be corrected by adjusting the washer thickness and the image quality will not obviously decline.

This paper confirms that this work is original and has not been published elsewhere nor is it currently under consideration for publication elsewhere. In this paper, the optimum structural design of the reduction relay lens for the field of view stitching applications is reported. The method of adjusting washer thickness is applied to compensate for the reduction ratio consistency difference of lenses. The optimized structure also greatly reduces the difficulty of lenses manufacture, alignment and improves the efficiency of assembly.

The purpose of this paper is to examine the role of infrastructure on the income growth and poverty reduction of rural household in China by estimating the impact of road accessibility on the extent of household off-farm employment and its heterogeneous effects among the groups with different income level and earning capacity.

Using nationally representative panel data collected in 100 villages about 2000 households across five provinces in 2005, 2008, 2012, 2016 and 2019. This study adopts Tobit model with panel data, zero-inflated Poisson model and static nonbalanced panel model to yield consistent results.

We find that road accessibility generally has no effect on the number of off-farm laborers and duration of off-farm employment. However, road accessibility is not beneficial for the households in the low-income villages or with low educational attainment, but it benefits the households in the high-income villages by promoting local off-farm employment or with high educational attainment by increasing the duration of migrant off-farm employment.

This study identifies the heterogeneous effects of road accessibility on the extent of off-farm employment among rural households, which narrows the research gap and enriches the literature. The empirical findings imply that road accessibility widens the gap between rich and poor in off-farm employment, which is of great important to the alleviation of relative poverty after 2020 in China.

This study/paper aims to reach the core objective of hospitality order cancellation prediction (HOCP), that is, to identify potential cancellers from many customer bases, thereby enhancing the effectiveness of customer retention campaigns. However, few studies have focused on predicting hospitality order cancellation.

A novel profit-driven model for predicting hospitality order cancellation is proposed to bridge this research gap. The authors construct profit-driven extreme gradient boosting (XGBoost) based on a grid search on HOCP to maximize profit by selecting optimal hyperparameters of XGBoost.

Real-world data set is analyzed, and the proposed model yields more profits than other predictive models. Sensitivity analysis proves that the proposed model is robust to the key hyperparameter and application scenario. Furthermore, some preventive measures based on visual analysis results are provided to reduce the cancelled probability of orders.

This research will help hotel managers to transfer the modeling goal to profit orientation and encourage relevant researchers to interpret the prediction results of models for hotel order cancellation prediction in a post hoc manner. Besides, the proposed model can be applied to various enterprises with different average order profits and help managers optimize revenue management.

This research expands the relevant literature and offers guidance for predicting hospitality order cancellation from a profit-driven perspective at the customer level. The proposed model can provide macro-control to hotel managers and obtain the most satisfactory profits in micro-control.

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

With the rise in the opportunity to go to college, the purpose of this paper is to identify if China's rural poor are being excluded from the university system, and if so, why.

Two sets of the authors' own primary survey data were used: a group of randomly selected high school students in Shaanxi Province and a census of all freshmen entering into four universities in Sichuan, Anhui and Shaanxi. The intention was to show if the rate of the rural poor attending universities is lower than that of urban students and that of rural non‐poor; also to identify the barriers to education (if they exist) that are keeping enrollment rates low for the rural poor. The authors used ordinary least squares method to make the estimations.

Matriculation rate of the poor into college was found to be substantially lower than the students from non‐poor families. Clearly, barriers exist that are excluding the rural poor; however, the authors demonstrate that the real barriers are not at the point of college admissions, but before students have even matriculated into high school.

This is the first empirical work which studies the barriers that keep the poor out of university.

Digital libraries and social media are two sources of online information with different characteristics. The purpose of this paper is to integrate self-efficacy into the analysis of the relationship between information sources and decision making, and to explore the effect of self-efficacy on decision making, as well as the interacting effect of self-efficacy and information sources on decision making.

Survey data were collected and the partial least squares structural equation modeling was employed to verify the research model.

The effect of digital library usage for acquiring information on perceived decision quality (PDQ) is larger than that of social media usage for acquiring information on PDQ. Self-efficacy in acquiring information (SEAI) stands out as the key determinant for PDQ. The effect of social media usage for acquiring information on PDQ is positively moderated by SEAI.

Decision making is a fundamental activity for individuals, but human decision making is often subject to biases. The findings of this study provide useful insights into decision quality improvement, highlighting the importance of SEAI in the face of information overload.

This study integrates self-efficacy into the analysis of the relationship between information sources and decision making, presenting a new perspective for decision-making research and practice alike.

The purpose of this paper is to design a multi-sensory anthropomorphic prosthetic hand and a grasping controller that can detect the slip and automatically adjust the grasping force to prevent the slip.

To improve the dexterity, sensing, controllability and practicability of a prosthetic hand, a modular and multi-sensory prosthetic hand was presented. In addition, a slip prevention control based on the tactile feedback was proposed to improve the grasp stability. The proposed controller identifies slippages through detecting the high-frequency vibration signal at the sliding surface in real time and the discrete wavelet transform (DWT) was used to extract the eigenvalues to identify slippages. Once the slip is detected, a direct-feedback method of adjusting the grasp force related with the sliding times was used to prevent it. Furthermore, the stiffness of different objects was estimated and used to improve the grasp force control. The performances of the stiffness estimation, slip detection and slip control are experimentally evaluated.

It was found from the experiment of stiffness estimation that the accuracy rate of identification of the hard metal bottle could reach to 90%, while the accuracy rate of identification of the plastic bottles could reach to 80%. There was a small misjudgment rate in the identification of hard and soft plastic bottles. The stiffness of soft plastic bottles, hard plastic bottles and metal bottles were 0.64 N/mm, 1.36 N/mm and 32.55 N/mm, respectively. The results of slip detection and control show that the proposed prosthetic hand with a slip prevention controller can fast and effectively detect and prevent the slip for different disturbances, which has a certain application prospect.

Due to the small size, low weight, high integration and modularity, the prosthetic hand is easily applied to upper-limb amputees. Meanwhile, the method of the slip prevention control can be used for upper-limb amputees to complete more tasks stably in daily lives.

A multi-sensory anthropomorphic prosthetic hand is designed, and a method of stable grasps control based on slip detection by a tactile sensor on the fingertip is proposed. The method combines the stiffness estimation of the object and the real-time slip detection based on DWT with the design of the proportion differentiation robust controller based on a disturbance observer and the force controller to achieve slip prevention and stable grasps. It is verified effectively by the experiments and is easy to be applied to commercial prostheses.

As an advanced calculation methodology, reliability-based multidisciplinary design optimization (RBMDO) has been widely acknowledged for the design problems of modern complex engineering systems, not only because of the accurate evaluation of the impact of uncertain factors but also the relatively good balance between economy and safety of performance. However, with the increasing complexity of engineering technology, the proposed RBMDO method gradually cannot effectively solve the higher nonlinear coupled multidisciplinary uncertainty design optimization problems, which limits the engineering application of RBMDO. Many valuable works have been done in the RBMDO field in recent decades to tackle the above challenges. This study is to review these studies systematically, highlight the research opportunities and challenges, and attempt to guide future research efforts.

This study presents a comprehensive review of the RBMDO theory, mainly including the reliability analysis methods of different uncertainties and the decoupling strategies of RBMDO.

First, the multidisciplinary design optimization (MDO) preliminaries are given. The basic MDO concepts and the corresponding mathematical formulas are illustrated. Then, the procedures of three RBMDO methods with different reliability analysis strategies are introduced in detail. These RBMDO methods were proposed for the design optimization problems under different uncertainty types. Furtherly, an optimization problem for a certain operating condition of a turbine runner blade is introduced to illustrate the engineering application of the above method. Finally, three aspects of future challenges for RBMDO, namely, time-varying uncertainty analysis; high-precision surrogate models, and verification, validation and accreditation (VVA) for the model, are discussed followed by the conclusion.

The scope of this study is to introduce the RBMDO theory systematically. Three commonly used RBMDO-SORA methods are reviewed comprehensively, including the methods' general procedures and mathematical models.

This paper aims to examine the indirect tax reform process in China. Specifically, it examines the reform of business tax to value-added tax. Inefficiencies within the new tax system are identified and discussed. The “business tax to value-added tax” reform was seen as an essential element in promoting the economic transition and stimulating the service industries (Jin and Jin, 2013).

The paper uses archival and current literature. In undertaking the study, the different periods of indirect tax are examined, prior to 1994, 1994-2012, the changes from 2012 culminating in the new 2017 regime. Attributes of “good” value-added tax (VAT) systems are covered as well as a comparison with New Zealand’s goods and services tax (GST).

The paper finds that to align with the international trend of indirect tax development and more efficiently accomplish the economic transition China needs to build a more neutral VAT system with fewer reduced rates and exemptions and the tax system have created tax inefficiencies and increased the compliance cost. VAT is imposing an increasingly significant impact on China’s national economy and industrial structure as well as accountants.

This is the first study that analyses the indirect tax reforms that are currently being implemented in China and as such has lessons for China but also for VAT/GST in general. We should not forget how special New Zealand’s GST is and the clarity of focus of those who implemented it!