Search results

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues, causing service disruptions and cost overruns. These defects can be avoided if a link between the early design stages and maintenance feedback is established. This study aims to use experts’ experience in HVAC maintenance in health-care facilities to list and evaluate the risk of each maintenance issue caused by a design defect, supported by the literature.

Following semistructured interviews with experts, 41 maintenance issues were identified as the most encountered issues. Subsequently, a survey was conducted in which 44 participants evaluated the probability and impact of each design-caused issue.

Chillers were identified as the HVAC components most prone to design defects and cost impact. However, air distribution ducts and air handling units are the most critical HVAC components for maintaining healthy conditions inside health-care facilities.

The unavailability of comprehensive data on the cost impacts of all design-related defects from multiple health-care facilities limits the ability of HVAC designers to furnish case studies and quantitative approaches.

This study helps HVAC designers acquire prior knowledge of decisions that may have led to unnecessary and avoidable maintenance. These design-related maintenance issues may cause unfavorable health and cost consequences.

The primary focus of this study is to tackle a critical industry issue concerning energy inefficiency. This is achieved through an investigation into enhancing heat transfer in solar radiation phenomena on a curved surface. The problem formulation of governing equations includes the combined effects of thermal relaxation, Newtonian heating, radiation mechanism, and Darcy-Forchheimer to enhance the uniqueness of the model. This research employs the Cattaneo–Christov heat theory model to investigate the thermal flux via utilizing the above-mentioned phenomenon with a purpose of advancing thermal technology. A mixture of silicon dioxide (SiO_2)\ and Molybdenum disulfide (MoS_2) is considered for the nanoparticle’s thermal propagation in base solvent propylene glycol. The simulation of the modeled equations is solved using the Shifted Legendre collocation scheme (SLCS). The findings show that, the solar radiation effects boosted the heating performance of the hybrid nanofluid. Furthermore, the heat transmission progress increases against the curvature and thermal relaxation parameter.

Shifted Legendre collocation scheme (SLCS) is utilized to solve the simulation of the modeled equations.

The findings show that, the solar radiation effects boosted the heating performance of the hybrid nanofluid. The heat transmission progress increase against the curvature and thermal relaxation parameter.

This research employs the Cattaneo–Christov heat theory model to investigate the thermal flux via utilizing the above-mentioned phenomenon with a purpose of advancing thermal technology.

Commercial buildings, which include office buildings, are one of the three major energy-consuming sectors, alongside industrial and transportation sectors. The vast increase in the number of buildings is a positive sign of the rapid development of Malaysia. However, most Malaysian government office buildings tend to consume energy inefficiently due to lack of energy optimization. Most of the previous studies focused on the performance of green buildings in fulfilling the green development guidelines. As such, it is essential to study the energy performance of existing government office buildings that were constructed before most energy-efficient standards were implemented to mitigate energy wastage due to the lack of energy optimization. This study aims to analyse the energy performance of existing non-green Malaysian government office buildings and the factors that influence building energy consumption, as well as to evaluate the efficacy of the existing energy conservation measures.

This study was conducted by a literature review and case study. The chosen buildings are six government office building blocks located in Kuala Lumpur, the capital city of Malaysia. In this study, a literature review has been conducted on the common factors affecting energy consumption in office buildings. The energy consumption data of the buildings were collected to calculate the building energy intensity (BEI). The BEI was compared to the MS1525:2019 and GBI benchmarks to evaluate energy performance. SketchUp software was utilized to illustrate the solar radiation and sun path diagram of the case study buildings. Finally, recommendations were derived for retrofit strategies based on non-design factors and passive design factors.

In typical government office buildings, the air-conditioning system consumed the most energy at 65.5%, followed by lighting system at 22.6%, and the remaining 11.9% was contributed by office appliances. The energy performance of the case study buildings is considered as satisfactory as the BEI did not exceed the MS1525:2019 benchmark of 200 kWh/m2/year. The E Block recorded the highest BEI of 183.12 kWh/m2/year in 2020 due to its north-east orientation which is exposed to the most solar radiation. Besides, E Block consists of rooms that can accommodate large number of occupants. As such, non-design factors which include higher occupancy rate and higher cooling demand due to high outdoor temperature leads to higher energy consumption. By considering passive design features such as building orientation and building envelope thermal properties, energy consumption can be reduced significantly.

This study provided a comprehensive insight into the energy performance of Malaysian government office buildings, which were constructed before the energy-efficient standards being introduced. By calculating the BEI of six government office buildings, it is found that the energy performance of the case study buildings fulfils the MS1525 benchmark, and that all their BEIs are below 200 kWh/m2/year. Malaysia's hot and humid climate significantly affects a building's cooling load, and it is found the air-conditioning system is the major energy consumer of Malaysian government office buildings. This study discusses the efficacy of the energy-saving measures implemented in the case study buildings to optimize energy consumption. Recommendations were derived based on the non-design factors and passive design factors that affected the energy consumption of the case study building. It is envisioned that this study can provide practical strategies for retrofit interventions to reduce energy consumption in Malaysian office buildings as well as for office buildings that are in a similar climate.

The buildings should be designed by respecting the environmental and climatic conditions they are in and their orientation. Then, the characteristics of the building envelope (BE) play an important role in building energy consumption and user comfort. In fact, the type and material of glazing is one of the crucial parameters for BE. The transparency ratio of BE also determines the façade performance. The aim of this study is to analyze the different renovation scenarios for BE with high transparency of an educational building (EB) in hot summer weather to obtain indoor thermal comfort (ITC) for users.

The methodology includes thorough measurement of existing ITC using TESTO-440 and simulation of each retrofit scenario using DesignBuilder building energy modeling (BEM) simulation software with Energyplus to determine optimal thermal comfort. Since the study focuses on the impact of the transparent BE on summer ITC, four main scenarios, naturally ventilated (NV) façade, film-coated glass façade, replacement of glazing with opaque units, sun-controlled façade with overhang and solar shading, were simulated. The results were analyzed comparatively on both performance and cost to find the best renovation solutions.

A total of 7 different renovation scenarios were tested. Simulation results show that passive systems such as NV have limited contribution to indoor air temperature (IAT) improvement, achieving only a 4 °C reduction while offering the lowest cost. A film coating resulted in a reduction of 3–6 °C, but these applications have the highest cost and least impact on ITC. It was found that exterior coating leads to better results in film coating. Preventing and limiting the increase in IAT was achieved by reducing the transparency ratio of BE. The best results were obtained in these scenarios, and it was possible to reduce IAT by more than 10 °C. The best performance/cost value were also obtained by decreasing transparency ratio of roof and sun control.

Since the high transparency ratio has a negative impact on summer comfort, especially in hot climate zones, summer ITC was prioritized in the renovation solutions for the case building.

The study’s findings present a range of solutions for improving the ITC of highly transparent buildings. The solutions can help building managers see the differences in renovation costs and their impacts on ITC to decrease the cooling load of the existing buildings.

Living walls (LWs), vegetated walls with an integrated growth layer behind, are being increasingly incorporated in buildings. Examining plant characteristics’ comparative impacts on LWs’ energy efficiency-related thermal behavior was aimed, considering that studies on their relative effects are limited. LWs of varying leaf albedo, leaf transmittance and leaf area index (LAI) were studied for Antalya, Turkey for typical days of four seasons.

Dynamic simulations run by Envi-met were used to assess the plant characteristics’ influence on seasonal and orientation-based heat fluxes. After model calibration, a sensitivity analysis was conducted through 112 simulations. The minimum, mean and maximum values were investigated for each plant characteristic. Energy need (regardless of orientation), temperature and heat flux results were compared among different scenarios, including a building without LW, to evaluate energy efficiency and variables’ impacts.

LWs reduced annual energy consumption in Antalya, despite increasing energy needs in winter. South and west facades were particularly advantageous for energy efficiency. The impacts of leaf albedo and transmittance were more significant (44–46%) than LAI (10%) in determining LWs’ effectiveness. The changes in plant characteristics changed the energy needs up to ca 1%.

This study can potentially contribute to generating guiding principles for architects considering LW use in their designs in hot-humid climates.

The plant characteristics’ relative impacts on energy efficiency, which cannot be easily determined by experimental studies, were examined using parametric simulation results regarding three plant characteristics.

Fluid flows through rotatory disks are encountered in industrial and practical engineering processes, such as computer storage devices, gas turbine rotators, rotating machinery, air cleaning machines, etc. The primary purpose of this research is to examine the combined aspects of variable electrical conductivity, thermal radiation, Soret and Dufour effects on a magnetohydrodynamic Maxwell single-walled carbon nanotubes–graphene oxide–multi-walled carbon nanotubes–copper (SWCNT–GO–MWCNT–Cu)/sodium alginate tetra-hybrid nanofluid flow through a stretchable rotatory disk.

The modeled administrative equations of the present flow problem are converted to a non-dimensional system of ordinary differential equations by applying suitable similarity conversion and then solved numerically by implementing the bvp4c method. The impressions of noteworthy dimensionless parameters on velocity, temperature, concentration distributions, Nusselt number, skin friction and Sherwood number are reported via graphs and tables.

The authors figured out that the developed values of the rotation parameter diminish the temperature but enhance both the radial and angular velocities. Further, the mass and heat transmission rates are better for tetra-hybrid nanofluids than for ternary and hybrid nanofluids.

The present study emphasizes a special type of fluid called the tetra-hybrid nanofluid. The existing literature has not discussed the Maxwell tetra hybrid nanofluid flow through a stretchable rotatory disk with variable electrical conductivity. Besides, the novel aspects of magnetohydrodynamics, thermal radiation, Soret and Dufour effects are also incorporated into the present flow problem.

This paper aims to present the application of a tailored systematic engineering design procedure to the concept design of a small production plant for compostable packaging made by straw fibres and bioplastic. In particular, the obtained boxes are intended to be used for wine bottles.

A systematic procedure has been adopted, which underpins on a comprehensive analysis of the design requirements and the function modelling of the process. By considering well-known models of the engineering design process, the work focuses on the early design stages that precede the embodiment design of the whole components of the plant.

The followed design approach allowed to preliminarily evaluate different alternatives of the process from a functional point of view, thus allowing to identify the preferred conceptual process solution. Based on the identified functional sequence, a first evaluation of the potential productivity and the required human resources has been performed.

The procedure shown in this work has been applied only for the considered case of compostable packaging, and other applications are needed to optimize it. Nevertheless, the adopted systematic approach can be adapted for any context where it is necessary to conceive a new production plant for artefacts made by innovative materials.

The work presented in this paper represents one of the few practical examples available in the literature where systematic conceptual design procedures are presented. More specifically, to the best of the authors’ knowledge, this is the very first application of systematic design methods to compostable packaging production.

The purpose of this paper is to introduce the simple synthesis process of thermal-insulation coating by using three different nanoparticles, namely, nano-zinc oxide (ZnO), nano-tin dioxide (SnO₂) and nano-titanium dioxide (TiO₂), which can reduce the temperature of solar cells.

The thermal-insulation coating is designed using sol-gel process. The aminopropyltriethoxysilane/methyltrimethoxysilane binder system improves the cross-linking between the hydroxyl groups, -OH of nanoparticles. The isopropyl alcohol is used as a solvent medium. The fabrication method is a dip-coating method.

The prepared S1B1 coating (20 Wt.% of SnO₂) exhibits high transparency and great thermal insulation property where the surface temperature of solar cells has been reduced by 13°C under 1,000 W/m² irradiation after 1 h. Meanwhile, the Z1B2 coating (20 Wt.% of ZnO) reduced the temperature of solar cells by 7°C. On the other hand, the embedded nanoparticles have improved the fill factor of solar cells by 0.2 or 33.33%.

Findings provide a significant method for the development of thermal-insulation coating by a simple synthesis process and low-cost materials.

The thermal-insulation coating is proposed to prevent exterior heat energy to the inside solar panel glass. At the same time, it can prevent excessive heating on the solar cell’s surface, later improves the efficiency of solar cell.

This study presents a the novel method to develop and compare the thermal-insulation coating by using various nanoparticles, namely, nano-TiO₂, nano-SnO₂ and nano-ZnO at different weight percentage.

Cold supply chain technology is critical for extending the shelf life of perishable leafy green vegetables. This study aims to investigate the concept of managing leafy green products using cold supply chain technology and visualise the findings.

Using expert interviews and data visualisation approaches, this study examines how organisations deal with the complexity of cold supply chain processes and networks. Thematic data analysis was conducted. Two types of software were used to accomplish the research objectives. The first software used AntConc version 3.5.8 with word frequency (N-gram) analysis, whereas the second software, VOSViewer offered co-occurrence network visualisation and cluster analysis.

The findings show that the appropriate design of cold chain technology is critical in ensuring the freshness and quality of leafy green vegetables. The primary goal of managing the complexity of the cold supply chain is to achieve product freshness and energy efficiency. Regardless of the importance of energy efficiency, cold supply chains require warehouse management solutions for transportation and storage.

This study found that proper design and selection of appropriate technology in the cold supply chain have driven the companies to improve the firms’ competitive advantage while delivering the best quality of perishable leafy green food products. In addition, the freshness, quality, safety, and health of leafy green vegetables will be determined by the company’s capacity to handle long-distance transportation and select the appropriate distribution channels and storage. Warehouse management system technology was found to be secondary compared to cold chain technology, although distribution and warehousing practices are critical for supply chain performance.

This study has established the conceptual indicators based on best practices and outcomes for the cold supply chain. This study argued that cold supply chain management and performance should be monitored independently. Furthermore, the theory of technological adoption can be expanded to include product nature as a driver. Finally, this study has established cold chain best practices based on a perishable supply chain perspective. The findings of this study can promote healthy foods to solve zero hunger and achieve sustainable development goals. Although this study demonstrates that technology improves supply chain practises, cold storage and logistics benefit the most from technological advancements. In contrast, non-cold supply chains benefit from technology-driven improvements in performance.

The purpose of this study is to investigate the Dynamics of micropolar – water B Fluids flow simultaneously under the influence of thermal radiation and Soret–Dufour Mechanisms.

The thermal radiation contribution, the chemical change and heat generation take fluidity into account. The flow equations are used to produce a series of dimensionless equations with appropriate nondimensional quantities. By using the spectral homotopy analysis method (SHAM), simplified dimensionless equations have been quantitatively solved. With Chebyshev pseudospectral technique, SHAM integrates the approach of the well-known method of homotopical analysis to the set of altered equations. In terms of velocity, concentration and temperature profiles, the impacts of Prandtl number, chemical reaction and thermal radiation are studied. All findings are visually shown and all physical values are calculated and tabulated.

The results indicate that an increase in the variable viscosity leads to speed and temperature increases. Based on the transport nature of micropolar Walters B fluids, the thermal conductivity has great impact on the Prandtl number and decrease the velocity and temperature. The current research was very well supported by prior literature works. The results in this paper are anticipated to be helpful for biotechnology, food processing and boiling. It is used primarily in refrigerating systems, tensile heating to large-scale heating and oil pipeline reduction.

All results are presented graphically and all physical quantities are computed and tabulated.