Search results

Current evidence indicates that humans and animals are at increased risk of multiple health challenges due to microplastic (MP) profusion. However, mitigation is constrained by inadequate scientific data, further aggravated by the lack of evidence in many African countries. This review therefore synthesized evidence on the current extent of MP pollution in Africa and the analytical techniques for reporting.

A literature search was undertaken in research databases. Medical subject headings (MeSH) terms and keywords were used in the literature search. The authors found 38 studies from 10 countries that met the inclusion criteria.

Marine organisms had MPs prevalence ranging from 19% to 100%, whereas sediments and water samples had between 77 and 100%. The most common and dominant polymers included polypropylene and polyethylene.

This review shows that most studies still use methods that are prone to human errors. Therefore, the concentration of MPs is likely underestimated, even though the authors’ prevalence evaluations show MPs are still largely pervasive across multiple environmental matrices. Also, the study reveals significant spatial disparity in MP research across the African continent, showing the need for further research in other African countries.

Even though some reviews have assessed MPs pollution in Africa, they have not evaluated sample prevalence, which is necessary to understand not only concentration but pervasiveness across the continent. Secondly, this study delves deeper into various methods of sampling, extraction and analysis of MPs, as well as limitations and relevant recommendations.

Solid, liquid and e-waste pose serious health hazards, environmental pollution and contribute to climate change. To address these issues of solid waste management (SWM), amidst many policy decisions, the Government of India roped in several institutions, including self-help groups (SHGs), into the Swachh Bharat Movement (Clean India Mission). This study aims to illustrate the significant contributions of SHG’s in tackling SWM, particularly the plastic waste menace in India, while fostering socio-economic values and sustainable development goals (SDGs).

Using a from-the-field approach, qualitative data were collected from 30 members of three SHGs to understand their significant contributions in mitigating plastic waste.

This research identifies three major themes: economic value creation, social value creation and SDGs via collection and reduction of plastic waste landfills. Furthermore, several related subthemes are identified.

This study offers pragmatic solutions to deal with plastic waste at personal, community, institutional and governmental levels. Moreover, it recommends engaging SHGs to promote sustainable waste management practices such as segregating wastes at source, regulating plastic bag usage, advocating behavioural change towards waste generation and protecting the environment.

The authors consider a proven case of SHG’s contribution to protect the environment and emphasize the need to involve more such groups in waste management practices.

Manufacturing companies continue to encounter a diverse set of obstacles while embracing sustainable development goals. Accordingly, the purpose of this study is to explore critical sustainable development-related barriers to flexible packaging manufacturing companies in the New Zealand context.

Drawing on a qualitative multiple case studies approach, the authors collected data from the New Zealand flexible packaging industry. Semistructured interviews were conducted with the senior corporate managers in two large flexible packaging companies. Following the thematic analysis approach, the authors analyzed the information collected from the participants and synthesized our findings under the key dimensions of internal and external barriers to sustainable development.

The findings revealed that internal barriers to sustainable flexible packaging are linked to economic, operational and technical issues. Conversely, external barriers include global crises and disruption, customer behavior and preferences and institutional and infrastructural-related aspects. Based on the analysis of empirical findings, the authors further identified the underlying reasons for sustainable flexible packaging barriers and recommended guidelines that could assist corporate managers and policymakers in addressing obstacles inhibiting the flexible packaging industry from adopting sustainable business practices.

The authors argue that this study is one of the early studies to consider inhibiting factors to incorporate sustainable development into the New Zealand flexible packaging industry context. Building on a range of theoretical perspectives, the authors extend the current body of knowledge seeking to advance the sustainable development agenda in the New Zealand flexible packaging industry and offer recommended pathways fostering sustainable development in a distinctive manufacturing context.

This study aims to analyze the Prandtl fluid flow in the presence of better mass diffusion and heat conduction models. By taking into account a linearly bidirectional stretchable sheet, flow is produced. Heat generation effect, thermal radiation, variable thermal conductivity, variable diffusion coefficient and Cattaneo–Christov double diffusion models are used to evaluate thermal and concentration diffusions.

The governing partial differential equations (PDEs) have been made simpler using a boundary layer method. Strong nonlinear ordinary differential equations (ODEs) relate to appropriate non-dimensional similarity variables. The optimal homotopy analysis technique is used to develop solution.

Graphs analyze the impact of many relevant factors on temperature and concentration. The physical parameters, such as mass and heat transfer rates at the wall and surface drag coefficients, are also displayed and explained.

The reported work discusses the contribution of generalized flux models to note their impact on heat and mass transport.

This study investigates the flow and heat transfer in a magnetohydrodynamic (MHD) ternary hybrid nanofluid (HNF), considering the effects of viscous dissipation and radiation.

The transport equations are transformed into nondimensional partial differential equations. The local nonsimilarity (LNS) technique is implemented to truncate nonsimilar dimensionless system. The LNS truncated equation can be treated as ordinary differential equations. The numerical results of the equation are accomplished through the implementation of the bvp4c solver, which leverages the fourth-order three-stage Lobatto IIIa formula as a finite difference scheme.

The findings of a comparative investigation carried out under diverse physical limitations demonstrate that ternary HNFs exhibit remarkably elevated thermal efficiency in contrast to conventional nanofluids.

The LNS approach (Mahesh et al., 2023; Khan et al., 20223; Farooq et al., 2023) that we have proposed is not currently being used to clarify the dynamical issue of HNF via porous media. The LNS method, in conjunction with the bvp4c up to its second truncation level, yields numerical solutions to nonlinear-coupled PDEs. Relevant results of the topic at hand, obtained by adjusting the appropriate parameters, are explained and shown visually via tables and diagrams.

This study aims to develop a research agenda for the advancement of theory application in practical contexts by presenting a case study of the Engagement in Plastic-free Innovation for Change (EPIC) programme delivered by Plastic Oceans Australasia (POA).

EPIC is a behaviour change programme by POA that aims to reduce single-use plastic (SUP) consumption in workplaces. The study evaluates the programme’s impact on employee perceptions and actual behaviour through pre- and post-programme data collection in two Australian workplaces. Data was gathered via online surveys and waste audits and analysed using SPSS statistics and Excel.

The case study highlights the need for theory application in programme evaluation instruments. Theory was not used in the programme evaluation tool, and theory could not be mapped onto the tool retroactively. The data from the present study showed mixed results. Data from Workplaces 1 and 2 indicated that EPIC successfully improved three out of seven employee perceptions of SUP reduction efforts. However, individual workplace data showed that EPIC only improved one out of seven perceptions in Workplace 1 and three out of seven perceptions in Workplace 2. Surprisingly, Workplace 1 observed a decrease in plastic waste after the programme, while Workplace 2 saw an increase. Without the clear integration of theory, it is difficult to pinpoint areas for improvement. It is, however, posited that COVID-19 restrictions on people attending their workplaces and low survey response rates may have contributed to these unexpected results.

The present study highlights key improvements that can be made to evaluations of voluntary behaviour change programmes. Careful evaluation of behaviour change programmes is key to improving programme effectiveness. Practitioners will find the suggested improvements from this study helpful in developing and refining voluntary behaviour change programme evaluations.

This is one of the first studies to evaluate the impacts of a voluntary behaviour change programme aimed at reducing SUPs in the workplace. It also adds to the limited literature on voluntary behaviour change interventions overall and adds to the movement towards better application of theory in behaviour change interventions.

This study aims to investigate the effects of nano or inorganic fillers on unsaturated polyester’s (UPE) thermal, mechanical, and physical properties. UPE reinforced with nanoparticles shows better properties than the pure polymer itself. Nano or inorganic fillers are used in the polymeric matrix to improve thermal, mechanical and physical properties.

To improve thermal, mechanical and physical properties, UPE resin was modified with silica (S), boron nitride (BN) and S/BN hybrid nanoparticles at different ratios. Viscosity and solids content measurement, Fourier transform infrared spectroscopy, contact angle measurement, scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and thermal conductivity coefficient tests were performed on the samples.

In the SEM analysis, the UPE sample showed a smooth appearance, while all samples containing additives showed phase separation and overall heterogeneous distribution. TGA results demonstrated that the thermal stability of the resin increased in the presence of S and BN additives. According to the results, it was observed that the presence of S and BN additives in the UPE resin and the use of certain ratios improved the resin properties.

As a result of the literature search, to the best of the authors’ knowledge, no study was found in which BN nanoparticles were included in the UPE resin together with S.

The 2008 Chinese melamine milk scandal resulted in six reported fatalities and affected around 300,000 children, of whom 54,000 were hospitalised. Previous studies have used linear approaches to examine the root causes of the melamine milk scandal.

In the present study, we applied a systems approach to the melamine milk scandal to identify the complex systems-level failures across the supply chain leading to the incident and why food fraud incidents such as this occurred in the dairy sector. Additionally, systemic failures associated with food fraud vulnerability factors were considered (i.e. opportunities, motivation and control measures).

48 contributory factors of influence were identified and grouped across six sociotechnical levels across the Chinese dairy system, from government to equipment and surroundings. Lack of vertical integration (processes and communication) contributed to the failure. When viewed from a broader perspective, the melamine milk scandal can be linked to a series of human errors and organisational issues associated with government bodies, the dairy supply chain, individual organisations and management decisions and individual actions of staff or processes.

This approach is of value to policymakers and the industry as it supports public health investigations of food fraud incidents and proactive food safety management.

To the best of our knowledge, this is the first study to analyse a food safety or fraud incident using the AcciMap approach and the food fraud vulnerability assessment (FFVA) technique. AcciMap analysis is applied to both unintentional and intentional aspects of the incident.

This study aims to explore the use of a double diamond design method to engage the industry in a sector-wide response to the issues of food waste as constructed by consumers. This particular design method is achieved by an exploration of a collective intelligence-participatory design (CIPD) project to engage industry participants in understanding and responding to consumers’ perceptions of the role of packaging in reducing food waste.

Using the UK Design Council’s double diamond design method as a guiding conceptual principle, the project recruited industry participants from medium to large food businesses across various food categories. Two scoping workshops with industry were held prior to the initiation of a 12-stage project (n = 57), and then two industry workshops were held (n = 4 and 14). Eighty participants completed an online qualitative survey, and 23 industry participants took part in a Think Tank Sprint Series. The Think Tanks used participatory design approaches to understand barriers and opportunities for change within food industry sub-sectors and test the feasibility and acceptability of package designs to reduce consumer waste.

For CIPD to work for complex problems involving industry, it is vital that stakeholders across macro- and micro-subsystems are involved and that adequate time is allowed to address that complexity. Using both the right tools for engagement and the involvement of the right mix of representatives across various sectors of industry is critical to reducing blame shift. The process of divergence and convergence allowed clear insight into the long-term multi-pronged approach needed for the complex problem.

Participatory design has been useful within various behaviour change settings. This paper has demonstrated the application of the double diamond model in a social marketing setting, adding value to an industry-wide project that included government, peak bodies, manufacturing and production and retailers.

Three-dimensional (3D)printed skulls for neurosurgical training are increasingly being used due to the widespread access to 3D printing technology, their low cost and accuracy, as well as limitations and ethical concerns associated with using human cadavers. However, little is known about the risks of airborne particles or volatile organic compounds (VOCs) released while drilling into 3D-printed plastic models. The aim of this study is to assess the level of exposure to airborne contaminants while burr hole drilling.

3D-printed skull samples were produced using three different materials (polyethylene terephthalate glycol [PETG], white resin and Bone^STN) across three different 3D print processes (fused filament fabrication, stereolithography [SLA] and material jetting). A neurosurgeon performed extended burr hole drilling for 10 min on each sample. Spot measurements of particulate matter (PM2.5 and PM10) were recorded, and air samples were analysed for approximately 90 VOCs.

The particulate matter for PETG was found to be below the threshold value for respirable particles. However, the particulate matter for white resin and Bone^STN was found to be above the threshold value at PM10, which could be harmful for long periods of exposure without personal protective equipment (PPE). The VOC measurements for all materials were found to be below safety thresholds, and therefore not harmful.

To the best of the authors’ knowledge, this is the first study to evaluate the safety of 3D-printed materials for burr hole surgical drilling. It recommends PETG as a safe material requiring minimal respiratory control measures, whereas resin-based materials will require safety controls to deal with airborne particles.