Search results

This study aims to minimize the transportation-related cost in distribution while utilizing a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach. An increased cost in distribution is a major problem for many companies due to the absence of efficient planning methods to overcome operational challenges in distinct distribution networks. The problem addressed in this study is to minimize the transportation-related cost in distribution while using a heterogeneous fixed fleet to deliver distinct demand at different geographical locations with a proper workload balancing approach which has not gained the adequate attention in the literature.

This study formulated the transportation problem as a vehicle routing problem with a heterogeneous fixed fleet and workload balancing, which is a combinatorial optimization problem of the NP-hard category. The model was solved using both the simulated annealing and a genetic algorithm (GA) adopting distinct local search operators. A greedy approach has been used in generating an initial solution for both algorithms. The paired t-test has been used in selecting the best algorithm. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet compositions of the heterogeneous fleet. Results were analyzed using analysis of variance (ANOVA) and Hsu’s MCB methods to identify the best scenario.

The solutions generated by both algorithms were subjected to the t-test, and the results revealed that the GA outperformed in solution quality in planning a heterogeneous fleet for distribution with load balancing. Through a number of scenarios, the baseline conditions of the problem were further tested investigating the alternative fleet utilization with different compositions of the heterogeneous fleet. Results were analyzed using ANOVA and Hsu’s MCB method and found that removing the lowest capacities trucks enhances the average vehicle utilization with reduced travel distance.

The developed model has considered both planning of heterogeneous fleet and the requirement of work load balancing which are very common industry needs, however, have not been addressed adequately either individually or collectively in the literature. The adopted solution methodologies to solve the NP-hard distribution problem consist of metaheuristics, statistical analysis and scenario analysis are another significant contribution. The planning of distribution operations not only addresses operational-level decision, through a scenario analysis, but also strategic-level decision has also been considered.

The planning of distribution operations not only addresses operational-level decisions, but also strategic-level decisions conducting a scenario analysis.

Distribution network design involves a set of strategic decisions in supply chains because of their long-term impacts on the total logistics cost and environment. To incorporate a trade-off between financial and environmental aspects of these decisions, this paper aims to determine an optimal location, among candidate locations, of a new logistics center, its capacity, as well as optimal network flows for an existing distribution network, while concurrently minimizing the total logistics cost and gas emission. In addition, uncertainty in transportation and warehousing costs are considered.

The problem is formulated as a fuzzy multiobjective mathematical model. The effectiveness of this model is demonstrated using an industrial case study. The problem instance is a four-echelon distribution network with 22 products and a planning horizon of 20 periods. The model is solved by using the min–max and augmented ε-constraint methods with CPLEX as the solver. In addition to illustrating model’s applicability, the effect of choosing a new warehouse in the model is investigated through a scenario analysis.

For the applicability of the model, the results indicate that the augmented ε-constraint approach provides a set of Pareto solutions, which represents the ideal trade-off between the total logistics cost and gas emission. Through a case study problem instance, the augmented ε-constraint approach is recommended for similar network design problems. From a scenario analysis, when the operational cost of the new warehouse is within a specific fraction of the warehousing cost of third-party warehouses, the solution with the new warehouse outperforms that without the new warehouse with respective to financial and environmental objectives.

The proposed model is an effective decision support tool for management, who would like to assess the impact of network planning decisions on the performance of their supply chains with respect to both financial and environmental aspects under uncertainty.

The literature that is presently available on sustainable supply chain management (SSCM) combining optimization and industry 4.0 techniques falls short in its depictions of the recent developments, budding pertinent areas and the importance of SSCM in the growth of industrial economies around the world. This article's main objective is to analyze current trends, highlight the latest initiatives and perform a meta-analysis of the literature that is currently accessible in the SSCM area with a special focus on optimization and industry 4.0 techniques. The paper also proposes a conceptual framework that will assist in illuminating how the ideas of optimization and industry 4.0 may contribute to realizing sustainability in supply chains.

The proposed study systematically reviews 85 research publications published between 2010 and 2022 in referenced peer-reviewed journals in diverse fields, including engineering, business and management, services and healthcare. Numerous categories are considered throughout the examination of the literature, including year-wise publications, prominent journals, type of research design, concerned industry and research technique used.

The study demonstrates a deeper comprehension of the literature in the field and its evolution throughout numerous industry sectors, which is helpful for both practitioners and academics. The results from the content analysis highlight various future research opportunities in the domain.

This is one of the first research articles that have attempted to establish, analyze and highlight the current trends and initiatives in the SSCM domain from an optimization and industry 4.0 techniques viewpoint. The cluster-based future research propositions also enhance the novelty of the study.

With gaining popularity, online communities are increasing. It is leading to the data and information overflow. So, there are some challenges like cyber frauds, cyberbullying, etc. while engaging with online communities. Not only this, anonymity of the participants, stress and racism are also big challenges in online communities' interaction. Online harassers' attack tactics have changed over time. In addition, there are challenges like quality of discussion, inequality in participation of the users, etc. may scale online communities towards incitement and activism. Therefore, this study will try to analyse these challenges for overall benefit of the society.

The underlying fuzzy set theory is employed to handle the fuzziness of users' perceptions since the attributes are expressed in linguistic preferences. Through exhaustive literature review, the authors have identified 15 challenges. These challenges are further categorised as cause and effect by using DEMATEL (Decision-Making Trial and Evaluation Laboratory) approach.

Lack of strategic planning and uninspired discussions between users has emerged as a major challenge in cause category. This study further demonstrates how individual challenge can be managed and developed to navigate the online communities to maintain a healthy environment in society.

Results are based on limited dataset. Therefore, findings cannot be generalised for all online communities.

The research findings offer a suitable direction to policymakers to formulate and design policies, laws and regulations to increase user engagement in the online community. The study is beneficial to firms and researchers in understanding the factors influencing effective management of online communities.

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

This study aims to look at challenges that hinder small- and medium-sized enterprises (SMEs) from using open data (OD). The research gaps identified are then used to propose a next generation of OD platform (ODP+).

This study proposes a more effective platform for SMEs called ODP+. A proof of concept was implemented by using modern techniques and technologies, with a pilot conducted among selected SMEs and government employees to test the approach’s viability.

The findings identify current OD platforms generally, and in Gulf Cooperation Council (GCC) countries, they encounter several difficulties, including that the data sets are complex to understand and determine their potential for reuse. The application of big data analytics in mitigating the identified challenges is demonstrated through the artefacts that have been developed.

This paper discusses several challenges that must be addressed to ensure that OD is accessible, helpful and of high quality in the future when planning and implementing OD initiatives.

The proposed ODP+ integrates social network data, SME data sets and government databases. It will give SMEs a platform for combining data from government agencies, third parties and social networks to carry out complex analytical scenarios or build the needed application using artificial intelligence.

The findings promote the potential future utilisation of OD and suggest ways to give users access to knowledge and features.

To the best of the authors’ knowledge, no study provides extensive research about OD in Qatar or GCC. Further, the proposed ODP+ is a new platform that allows SMEs to run natural language data analytics queries.

This paper aims to examine the COVID-19 pandemic’s impacts on the regional progression toward the Sustainable Development Goals (SDGs) through the lens of the adoption of 2030 Agenda by firms from different Italian regions.

Mixed methods were adopted. First, a content analysis was performed on 330 nonfinancial declarations released in the 2019–2021 period by a sample of 110 Italian listed companies from different regional macroareas. Second, regression analyses were run to test the impact of regional localization of businesses on SDGs adoption over pre-/during/post-COVID era.

The regional localization of businesses does not affect the SDGs adoption in the pre-COVID-19 era because Italian firms mainly address social goals. Instead, SDGs adoption is affected by regional localization of businesses both during and post-COVID-19 age, when Northern firms prioritize economic and social goals, whereas Southern firms shift from social to environmental goals.

This study fills the need of considering the subnational specificities in literature on sustainable development by capturing connections between firms, belonging territory, SDGs and COVID-19 crisis.

This paper aims to critically examine the accounting and information systems literature to understand the changes that are occurring in the management accounting profession. The changes the authors are interested in are linked to technology-driven innovations in managerial decision-making and in organizational structures. In addition, the paper highlights research gaps and opportunities for future research.

The authors adopted a grounded theory literature review method (Wolfswinkel et al., 2013) to achieve the study’s aims.

The authors identified four research themes that describe the changes in the management accounting profession due to technology-driven innovations: structured vs unstructured data, human vs algorithm-driven decision-making, delineated vs blurred functional boundaries and hierarchical vs platform-based organizations. The authors also identified tensions mentioned in the literature for each research theme.

Previous studies display a rather narrow focus on the role of digital technologies in accounting work and new competences that management accountants require in the digital era. By contrast, the authors focus on the broader technology-driven shifts in organizational processes and structures, which vastly change how accounting information is collected, processed and analyzed internally to support managerial decision-making. Hence, the paper focuses on how management accountants can adapt and evolve as their organizations transition toward a digital environment.

The purpose of this study was to examine how well a strength-based program grounded in positive psychology principles can advance the practical critical thinking skills of those pursuing the teacher training course.

This study used a single-group pre-test post-test design with 35 teacher-trainees from the Bachelor of Education course. The two-and-a-half-week strength-based program used the values in action survey to identify strengths. Pre- and post-test scores, measured with the Cornell Critical Thinking Test – Level Z, underwent Statistical Package for Social Sciences analysis including paired samples t-test for subcomponent and overall composite analysis.

Analysis of the pre- and post-test scores demonstrated a statistical significance in the critical thinking scores obtained by the teacher-trainees. Post-test scores were consistently significant. Out of the elements of critical thinking, induction, meaning, observation and credibility were more prominent. Deduction and assumption identification were also having a significant effect.

Most critical thinking programs focus on evaluating specific teaching methods for improving critical thinking skills. In education, positive psychology studies often center on students’ well-being, attention spans and academic success, aligning with wellness programs. Despite the importance of strengths in positive psychology, there is a lack of research on using a strength-based approach to boost critical thinking skills. This study aims to enhance teacher-trainees’ critical thinking by leveraging their individual strengths, moving away from traditional instructional strategies.