Search results

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This paper empirically investigates the processes by which manufacturing firms create radical innovations in their core production process, referred to as radical manufacturing technology innovations (RMTI). The purpose of this paper is to improve the understanding of the processes and practices manufacturing firms use to create RMTI.

Creation processes for 23 RMTI projects from diverse industry and technology contexts are explored. Data were collected via semi-structured interviews, and an inductive analysis was carried out to identify similarities and differences in RMTI types and creation processes.

Three types of RMTI and three alternative RMTI creation processes are revealed and characterized. An integrated view is developed of the activities of the equipment supplier and the manufacturing firm, highlighting their different roles and interaction across the three RMTI creation process types.

The exploratory design limits the depth of the analysis per RMTI project, and the focus is on manufacturing technology innovations in one country. The results extend previous case and context-specific findings on RMTI creation processes and provide novel frameworks for cross-case comparisons.

The manufacturing firms’ proactive role in RMTI creation is defined. A framework is proposed for using different RMTI creation processes for different types of RMTI.

This study addresses recent calls for empirical research on understanding the ways in which process innovations unfold in manufacturing firms. The findings emphasize the role of manufacturing firms as creators of RMTI in addition to their role as innovation adopters and implementers and reveal the suitability of different RMTI creation processes for different RMTI types.

Data-driven quality management systems, brought about by the implementation of digitisation and digital technologies, is an integral part of improving supply chain management performance. The purpose of this study is to determine a methodology to aid the implementation of digital technologies and digitisation of the supply chain to enable data-driven quality management and the reduction of waste from manufacturing processes.

Methodologies from both the quality management and data science disciplines were implemented together to test their effectiveness in digitalising a manufacturing process to improve supply chain management performance. The hybrid digitisation approach to process improvement (HyDAPI) methodology was developed using findings from the industrial use case.

Upon assessment of the existing methodologies, Six Sigma and CRISP-DM were found to be the most suitable process improvement and data mining methodologies, respectively. The case study revealed gaps in the implementation of both the Six Sigma and CRISP-DM methodologies in relation to digitisation of the manufacturing process.

Valuable practical learnings borne out of the implementation of these methodologies were used to develop the HyDAPI methodology. This methodology offers a pragmatic step by step approach for industrial practitioners to digitally transform their traditional manufacturing processes to enable data-driven quality management and improved supply chain management performance.

This study proposes the HyDAPI methodology that utilises key elements of the Six Sigma DMAIC and the CRISP-DM methodologies along with additions proposed by the author, to aid with the digitisation of manufacturing processes leading to data-driven quality management of operations within the supply chain.

The purpose of this paper is to present a Design for Additive Manufacturing (DfAM) methodology that connects several methods, from geometrical design to post-process selection, into a common optimisation framework.

A design methodology is formulated and tested in a case study. The outcome of the case study is analysed by comparing the obtained results with alternative designs achieved by using other design methods. The design process in the case study and the potential of the method to be used in different settings are also discussed. Finally, the work is concluded by stating the main contribution of the paper and highlighting where further research is needed.

The proposed method is implemented in a novel framework which is applied to a physical component in the case study. The component is a structural aircraft part that was designed to minimise weight while respecting several static and fatigue structural load cases. An addition goal is to minimise the manufacturing cost. Designs optimised for manufacturing by two different AM machines (EOS M400 and Arcam Q20+), with and without post-processing (centrifugal finishing) are considered. The designs achieved in this study show a significant reduction in both weight and cost compared to one AM manufactured geometry designed using more conventional methods and one design milled in aluminium.

The method in this paper allows for the holistic design and optimisation of components while considering manufacturability, cost and component functionality. Within the same framework, designs optimised for different setups of AM machines and post-processing can be automatically evaluated without any additional manual work.

This paper aims to review recent research in design for additive manufacturing (DfAM), including additive manufacturing (AM) terminology, trends, methods, classification of DfAM methods and software. The focus is on the design engineer’s role in the DfAM process and includes which design methods and tools exist to aid the design process. This includes methods, guidelines and software to achieve design optimization and in further steps to increase the level of design automation for metal AM techniques. The research has a special interest in structural optimization and the coupling between topology optimization and AM.

The method used in the review consists of six rounds in which literature was sequentially collected, sorted and removed. Full presentation of the method used could be found in the paper.

Existing DfAM research has been divided into three main groups – component, part and process design – and based on the review of existing DfAM methods, a proposal for a DfAM process has been compiled. Design support suitable for use by design engineers is linked to each step in the compiled DfAM process. Finally, the review suggests a possible new DfAM process that allows a higher degree of design automation than today’s process. Furthermore, research areas that need to be further developed to achieve this framework are pointed out.

The review maps existing research in design for additive manufacturing and compiles a proposed design method. For each step in the proposed method, existing methods and software are coupled. This type of overall methodology with connecting methods and software did not exist before. The work also contributes with a discussion regarding future design process and automation.

A real-time production scheduling method for semiconductor back-end manufacturing process becomes increasingly important in industry 4.0. Semiconductor back-end manufacturing process is always accompanied by order splitting and merging; besides, in each stage of the process, there are always multiple machine groups that have different production capabilities and capacities. This paper studies a multi-agent based scheduling architecture for the radio frequency identification (RFID)-enabled semiconductor back-end shopfloor, which integrates not only manufacturing resources but also human factors.

The architecture includes a task management (TM) agent, a staff instruction (SI) agent, a task scheduling (TS) agent, an information management center (IMC), machine group (MG) agent and a production monitoring (PM) agent. Then, based on the architecture, the authors developed a scheduling method consisting of capability & capacity planning and machine configuration modules in the TS agent.

The authors used greedy policy to assign each order to the appropriate machine groups based on the real-time utilization ration of each MG in the capability & capacity (C&C) planning module, and used a partial swarm optimization (PSO) algorithm to schedule each splitting job to the identified machine based on the C&C planning results. At last, we conducted a case study to demonstrate the proposed multi-agent based real-time production scheduling models and methods.

This paper proposes a multi-agent based real-time scheduling framework for semiconductor back-end industry. A C&C planning and a machine configuration algorithm are developed, respectively. The paper provides a feasible solution for semiconductor back-end manufacturing process to realize real-time scheduling.

This work aims at proposing a novel Internet of Things (IoT)-based and cloud-assisted monitoring architecture for smart manufacturing systems able to evaluate their overall status and detect eventual anomalies occurring into the production. A novel artificial intelligence (AI) based technique, able to identify the specific anomalous event and the related risk classification for possible intervention, is hence proposed.

The proposed solution is a five-layer scalable and modular platform in Industry 5.0 perspective, where the crucial layer is the Cloud Cyber one. This embeds a novel anomaly detection solution, designed by leveraging control charts, autoencoders (AE) long short-term memory (LSTM) and Fuzzy Inference System (FIS). The proper combination of these methods allows, not only detecting the products defects, but also recognizing their causalities.

The proposed architecture, experimentally validated on a manufacturing system involved into the production of a solar thermal high-vacuum flat panel, provides to human operators information about anomalous events, where they occur, and crucial information about their risk levels.

Thanks to the abnormal risk panel; human operators and business managers are able, not only of remotely visualizing the real-time status of each production parameter, but also to properly face with the eventual anomalous events, only when necessary. This is especially relevant in an emergency situation, such as the COVID-19 pandemic.

The monitoring platform is one of the first attempts in leading modern manufacturing systems toward the Industry 5.0 concept. Indeed, it combines human strengths, IoT technology on machines, cloud-based solutions with AI and zero detect manufacturing strategies in a unified framework so to detect causalities in complex dynamic systems by enabling the possibility of products’ waste avoidance.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The existing literature expresses a strong need to develop tools that support the manufacturing reshoring decision-making process. This paper aims to examine the suitability of analytical hierarchy process (AHP)-based tools for initial screening of manufacturing reshoring decisions.

Two AHP-based tools for the initial screening of manufacturing reshoring decisions are developed. The first tool is based on traditional AHP, while the second is based on fuzzy-AHP. Six high-level and holistic reshoring criteria based on competitive priorities were identified through a literature review. Next, a panel of experts from a Swedish manufacturing company was involved in the overall comparison of the criteria. Based on this comparison, priority weights of the criteria were obtained through a pairwise analysis. Subsequently, the priority weights were used in a weighted-sum manner to evaluate 20 reshoring scenarios. Afterwards, the outputs from the traditional AHP and fuzzy-AHP tools were compared to the opinions of the experts. Finally, a sensitivity analysis was performed to evaluate the stability of the developed decision support tools.

The research demonstrates that AHP-based support tools are suitable for the initial screening of manufacturing reshoring decisions. With regard to the presented set of criteria and reshoring scenarios, both traditional AHP and fuzzy-AHP are shown to be consistent with the experts' decisions. Moreover, fuzzy-AHP is shown to be marginally more reliable than traditional AHP. According to the sensitivity analysis, the order of importance of the six criteria is stable for high values of weights of cost and quality criteria.

The limitation of the developed AHP-based tools is that they currently only include a limited number of high-level decision criteria. Therefore, future research should focus on adding low-level criteria to the tools using a multi-level architecture. The current research contributes to the body of literature on the manufacturing reshoring decision-making process by addressing decision-making issues in general and by demonstrating the suitability of two decision support tools applied to the manufacturing reshoring field in particular.

This research provides practitioners with two decision support tools for the initial screening of manufacturing reshoring decisions, which will help managers optimize their time and resources on the most promising reshoring alternatives. Given the complex nature of reshoring decisions, the results from the fuzzy-AHP are shown to be slightly closer to those of the experts than traditional AHP for initial screening of manufacturing relocation decisions.

This paper describes two decision support tools that can be applied for the initial screening of manufacturing reshoring decisions while considering six high-level and holistic criteria. Both support tools are applied to evaluate 20 identical manufacturing reshoring scenarios, allowing a comparison of their output. The sensitivity analysis demonstrates the relative importance of the reshoring criteria.

Quality management practitioners have yet to cease the potential of digitalisation. Furthermore, there is a lack of tools such as frameworks guiding practitioners in the digital transformation of their organisations. The purpose of this study is to provide a framework to guide quality practitioners with the implementation of digitalisation in their existing practices.

A review of literature assessed how quality management and digitalisation have been integrated. Findings from the literature review highlighted the success of the integration of Lean manufacturing with digitalisation. A comprehensive list of Lean Six Sigma tools were then reviewed in terms of their effectiveness and relevance for the hybrid digitisation approach to process improvement (HyDAPI) framework.

The implementation of the proposed HyDAPI framework in an industrial case study led to increased efficiency, reduction of waste, standardised work, mistake proofing and the ability to root cause non-conformance products.

The activities and tools in the HyDAPI framework are not inclusive of all techniques from Lean Six Sigma.

The HyDAPI framework is a flexible guide for quality practitioners to digitalise key information from manufacturing processes. The framework allows organisations to select the appropriate tools as needed. This is required because of the varying and complex nature of organisation processes and the challenge of adapting to the continually evolving Industry 4.0.

This research proposes the HyDAPI framework as a flexible and adaptable approach for quality management practitioners to implement digitalisation. This was developed because of the gap in research regarding the lack of procedures guiding organisations in their digital transition to Industry 4.0.