Search results

With the rapid development of the pipeline transportation and exploitation of mineral resources, it is urgent requirement for the high-performance polymer matrix composites with low friction and wear to meet the needs of solid material transportation. This paper aims to prepare high-performance ultrahigh molecular weight polyethylene (UHMWPE) matrix composites and investigate the effect of service condition on frictional behavior for composite.

In this study, UHMWPE matrix composites with different content of MoS₂ were prepared and the tribological performance of the GCr15/composites friction pair in various sliding speeds (0.025–0.125 m/s) under dry friction conditions were studied by ball-on-disk tribology experiments.

Results show that the frictional behavior was shown to be sensitive to MoS2 concentration and sliding velocity. As the MoS2 content is 2 Wt.%, composites presented the best overall tribological performance. Besides, the friction coefficient fluctuates around 0.21 from 0.025 to 0.125 m/s sliding speed, while the wear rate increases gradually. Scanning electron microscopy images, energy-dispersive spectroscopy and Raman Spectrum analysis present that the main wear mechanisms were abrasive and fatigue wear.

The knowledge obtained herein will facilitate the design of UHMWPE matrix composites with promising self-lubrication performances which used in slag transport engineering field.

This study aimed to examine the research hotspots and evolution paths in the field of health information behavior (HIB) in China and abroad, and conduct comparative analysis to better understand its development trajectory globally.

A keyword search of the relevant literature included in the China National Knowledge Infrastructure (CNKI) database and Web of Science (WoS) core collection database was conducted, using the visualized analysis tool CiteSpace V for bibliometric analyses.

The common research hotspots in China and abroad can be divided into related research on HIB, research on its influencing factors and health information research. Among these, health information-seeking behavior has been the focus of domestic and foreign scholars. From the subdivision perspective, the focus of Chinese and foreign research hotspots differs. In terms of evolutionary path, the initial stage of HIB research in China and abroad revolves around health information and health information-seeking behavior, followed by the influencing factors of HIB; however, the research breakthrough point is the reverse. Then, domestic and foreign research was conducted on different types of HIBs. Regarding the selection of research objects, Chinese and foreign research objects were increasingly diversified.

This study also has several limitations. First, the literature sample only selected the literature in the WoS and CNKI databases, and there may be many HIB-related works published in other databases. Therefore, future research should include other databases. Second, in terms of language, this study selected only Chinese and English literature, but in many countries, important research results on certain topics are usually published in native language, and future research should expand the language selection. Third, this study only conducted national and institutional collaboration network analysis, keyword co-occurrence analysis, cluster analysis and timeline chart analysis.

The implication of practice can be divided into the following three points. (1) Analyzing the domestic and foreign literature on HIB and identifying highly cooperative institutions and countries in the field of HIB can reveal the research situation of HIB and help researchers establish new research networks in the future. (2) Analyzing the research hotspots and evolutionary paths of HIB at home and abroad is helpful for quickly understanding the development context of this field and grasping the emerging research directions such as HIB of people in close contact with patients, health information exchange behavior, health information avoidance behavior and health information discontinuation behavior, which can help researchers to explore the future research direction in this field, so as to determine the topic and fill the research gap. (3) Combining the analysis of HIB-related research at home and abroad is helpful for professionals to understand the characteristics and rules of HIB of users, consumers and other groups to further optimize and improve health information services.

Comparing and summarizing the research status of HIB in China and globally, and presenting the findings visually, will help researchers better grasp the research overview and hotspot changes in this field, as well as provide a follow-up reference.

This study aims to explore the relationship between promoter share pledging and the company’s dividend payout policy in India. Furthermore, this study also analyses the moderating impact of family involvement in business on the association between share pledging and dividend payout.

A sample of 236 companies from the S&P Bombay Stock Exchange Sensitive (BSE) 500 Index (2014–2023) has been analysed through fixed-effects panel data regression. For additional testing, robustness checks include alternative measures of dividend payout and promoter share pledging, as well as alternative methodologies such as Bayesian regression. Lastly, to address potential endogeneity, instrumental variables with a two-stage least squares (IV-2SLS) methodology have been implemented.

Upholding the agency perspective, a significantly negative impact of promoter share pledging on corporate dividend payouts in India has been uncovered. Moreover, family involvement in business moderates this relationship, highlighting that the negative association between promoter share pledging and dividend payouts is more pronounced in family companies. The findings are consistent throughout the robustness testing.

The present study represents a pioneering endeavour to empirically analyse the link between promoter share pledging and dividend payouts in India. It enhances the theoretical underpinnings of the agency relationship, particularly by substantiating the existence of Type II agency conflicts between majority and minority shareholders. The findings of this research bear significant implications for investors, researchers and policymakers, particularly in light of the widespread prevalence of promoter-controlled entities in India.

The objective was to investigate the utility of cottonseed oil (CSO) as a raw material for the synthesis of CSO water-based alkyd resin. The synthesis involved the polymerization of CSO, trimethylolpropane, phthalic anhydride (PA) and trimellitic anhydride (TMA). The prepared resin coating material was subsequently applied to the surface of steel structure material.

This study aimed to synthesize water-based alkyd resins using CSO. Therefore, the alkyd resin was introduced with TMA containing carboxyl groups and neutralized with triethylamine (TEA) to form a water-soluble salt. Then, the esterification kinetics of CSO water-based alkyd resin were investigated, and finally, the basic properties of CSO water-based alkyd resin coating were evaluated.

It was demonstrated that CSO water-based alkyd resin exhibited excellent water solubility and that the esterification kinetic of the synthesis reaction could be described by a second-order reaction. The coating properties of the material were investigated and found to have good basic properties, with 40% resin addition having the best corrosion resistance. Consequently, it could be effectively applied to the surface of steel structural materials.

This study not only met the requirement of environmentally friendly development but also expanded the application of CSO through the synthesis of CSO water-based alkyd resin via alcoholysis. Compared to fatty acid process, the alcoholysis reduced the need for fatty acid pre-extraction, simplifying the alkyd resin synthesis process. Thus, economic costs are effectively reduced.

Nowadays, artificial intelligence (AI) technology has demonstrated extensive applications in the field of art design. Attribute editing is an important means to realize clothing style and color design via computer language, which aims to edit and control the garment image based on the specified target attributes while preserving other details from the original image. The current image attribute editing model often generates images containing missing or redundant attributes. To address the problem, this paper aims for a novel design method utilizing the Fashion-attribute generative adversarial network (AttGAN) model was proposed for image attribute editing specifically tailored to women’s blouses.

The proposed design method primarily focuses on optimizing the feature extraction network and loss function. To enhance the feature extraction capability of the model, an increase in the number of layers in the feature extraction network was implemented, and the structure similarity index measure (SSIM) loss function was employed to ensure the independent attributes of the original image were consistent. The characteristic-preserving virtual try-on network (CP_VTON) dataset was used for train-ing to enable the editing of sleeve length and color specifically for women’s blouse.

The experimental results demonstrate that the optimization model’s generated outputs have significantly reduced problems related to missing attributes or visual redundancy. Through a comparative analysis of the numerical changes in the SSIM and peak signal-to-noise ratio (PSNR) before and after the model refinement, it was observed that the improved SSIM increased substantially by 27.4%, and the PSNR increased by 2.8%, serving as empirical evidence of the effectiveness of incorporating the SSIM loss function.

The proposed algorithm provides a promising tool for precise image editing of women’s blouses based on the GAN. This introduces a new approach to eliminate semantic expression errors in image editing, thereby contributing to the development of AI in clothing design.

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

The Internet of Things (IoT) platform empowers the digital transformation of the manufacturing industry by providing information technology services. Simultaneously, it enters the market by offering smart products to consumers. In light of different service fee scenarios, this article explores the optimal decision-making for the platform. It investigates the pricing models and entry decisions of IoT platforms.

In this study, we have formulated a game-theoretic model to scrutinize the influence of the IoT platform ventured into the smart device market on the pre-existing suppliers operating under subscription-based and usage-based pricing agreements.

Our outcome shows that introducing an IoT platform’s smart device has a differential effect on manufacturers depending on their contract type. Notably, our research indicates that introducing the platform’s own smart device within the subscription-based model does not negatively impact the profitability of incumbent manufacturers, so long as there is a noticeable discrepancy in the quality of the smart devices. However, our findings within the usage-based model demonstrate that despite the variance in smart device quality differentiation, the platform’s resolution to launch their device and impose their pricing agreements adversely affects established manufacturers. Additionally, we obtain valuable Intel regarding the platform’s entry strategies and contractual inclinations. We demonstrate that the platform is incentivized to present its smart device when reasonable entry costs remain. Furthermore, the platform prefers subscription-based contracts when the subscription fee is relatively high in non-platform entry and entry cases.

These findings hold significant practical implications for firms operating in an IoT-based supply chain.

Amidst the Industry 4.0 landscape, organizations are increasingly harnessing cutting-edge technologies and embracing digital change to fuel innovation. However, the full potential of innovation cannot be realized without organizational readiness. This study explores how various dimensions of organizational readiness and innovation influence digital change and firm performance.

Data were gathered via a survey of 303 managers from both state-owned and private-owned enterprises in Ho Chi Minh City, Vietnam, and analyzed utilizing partial least squares–structural equation modeling (PLS–SEM).

Organizational readiness positively influences both digital change and innovation. Additionally, innovation positively impacts digital change and mediates the relationship between organizational readiness and digital change. Furthermore, both innovation and digital change positively affect firm performance, whereas the control variable of ownership type has no significant correlation with firm performance. Finally, digital change mediates the relationship between innovation and firm performance.

This study contributes to the digital innovation literature by empirically testing the influence of organizational readiness on digital change and innovation within the context of Vietnam. By investigating whether innovation and digital change enhance firm performance, this study also addresses inconsistencies in the literature.

The few previous researches on the impact of calf compression garments (CG) on running performance while assessing physiological and perceptual factors. Therefore, this study investigated how the clothing pressure of two types of Calf CG, CG1 and CG2, affects muscle fatigue and activation during running.

Five healthy amateur runners(three female and two male)were recruited for a 30-min running trial. They wear a Calf CG on their right leg (CG group), but not on their left leg(CON group). After obtaining the clothing pressure of Calf CG on the gastrocnemius lateral head (GL), gastrocnemius medial head (GM) and tibialis anterior(TA) of the right leg, surface electromyography (sEMG)of four muscles of GL, GM, TA and rectus femoris (RF) of the left and right legs were measured during running, and heart rate, cardiopulmonary rate, and human RPE were also measured. Blood bleed oxygen before and after the running trial were measured. The root mean square (RMS) of the characteristic values was selected as an index for the analysis of sEMG signals, and the data were analyzed using statistical and computational methods.

The results showed that the indexes of heart rate, blood oxygen, and RPE were significantly increased, indicating that the subjects had reached the fatigue level. The comparison of mean clothing pressure at GL, GM and TA locations reveals that the TA location consistently exhibits the highest pressure for both types of CG. When wearing CG1, the mean clothing pressure at the GL and GM test points is greater than that of CG2(CG1-GL = 0.2059 kPa > CG2-GL = 0.148 kPa; CG1-GM = 0.1633 kPa > CG2-GM = 0.127 kPa). This is attributed to the double-layered fabric on the sides of CG1, which precisely covers the GL and GM areas, thereby resulting in higher mean clothing pressure at these locations compared to CG2. Conversely, the mean clothing pressure at the TA location for CG1 is lower than that for CG2(CG1-TA = 0.3852 kPa < CG2-TA = 0.426 kPa). The pressure exerted by the CG1 on the lower limb test areas has both positive and negative effects, though neither are statistically significant. The pressure exerted by CG2 alleviates fatigue at the directly affected locations GL and GM, but exerts excessive pressure on TA, resulting in a negative effect. Additionally, CG2 pressure alleviates fatigue at the indirectly affected location RF on the same side. Based on the specific clothing pressure data, it is concluded that when the pressure at the GM location is 0.127 kPa, 30 min of running has a fatigue-relieving effect. However, the pressure should not be excessively high, at 0.1633 kPa it exhibits an insignificant adverse effect. At the TA location, a garment pressure mean between 0.3852 and 0.426 kPa does not alleviate fatigue after 30 min of running, and the negative effect becomes more pronounced as the pressure increases. The pressure exerted by the CG at GL, GM, TA and RF locations shows significant changes from the previous time period during the 15–18 min interval after running. Therefore, in the design of CG, attention should be paid to the changes in clothing pressure effects on muscles during this specific time period.

The few previous researches on the impact of calf compression garments (CG) on running performance while assessing physiological and perceptual factors. Therefore, this study investigated how the clothing pressure of two types of Calf CG, CG1 and CG2, affects muscle fatigue and activation during running.

This study explores whether targeted microcredit can effectively alleviate households’ multidimensional relative poverty (MdRP) in rural China in the new era following the poverty elimination campaign and discusses it from a gendered perspective.

This study applies a fixed-effects model, propensity score matching (PSM) and two-stage instrumental variable method to two-period panel data collected from 611 households in rural western China in 2018 and 2021 to explore the effects, mechanisms and heterogenous performance of targeted microcredit on households’ MdRP in the new era.

(i) Targeted microcredit can alleviate MdRP among rural households in the new era, mainly by reducing income and opportunity inequality. (ii) Targeted microcredit can promote women’s empowerment, mainly by enhancing their social participation, thereby helping alleviate households’ MdRP. The effect of the targeted microcredit on MdRP is more significant in medium-educated women households and non-left-behind women households. (iii) The MdRP alleviation effect is stronger in villages with a high degree of digitalization.

Learn from the experience of targeted microcredit. Accurately identify poor groups and integrate loan design into financial health and women empowerment. Particularly, pay attention to less-educated and left-behind women households and strengthen coordination between targeted microcredit and digital village strategies.

This study clarifies the effect of targeted microcredit on women’s empowerment and households’ MdRP alleviation in the new era. It also explores its various effects on households with different female characteristics and regional digitalization levels, providing ideas for optimizing microcredit.