Search results

The purpose of this paper is to explore the key factors that affect consumer redemption intention toward mobile coupons recommended in social network sites (SNS).

A research model that integrates recommendation trust, positive utilities, and negative utilities of coupon redemption is developed. With the important role of trust in social recommendation taken into consideration, the key drivers of recommendation trust were analyzed in the model. Data were collected from 210 users with mobile coupon recommendation experience in one of the largest SNS (i.e. WeChat) in China. The authors used partial least squares technique to analyze the model.

Recommendation trust and positive utilities (economic benefits and perceived enjoyment) positively affect the intention of mobile coupon redemption. Perceived risk, as a negative utility, negatively influences coupon redemption intention. In addition, swift trust (structure assurance, perceived similarity, trust propensity, and expertise of the recommender), knowledge-based trust (familiarity with the retailers), and emotion-based trust (social tie strength) are key drivers that promote recommendation trust.

While prior research investigated mobile coupon redemption behavior in which coupons were issued by merchants, limited research analyzed consumer responses toward mobile coupons in social recommendation. This study examines the effects of recommendation trust, positive utilities, and negative utilities on mobile coupon redemption in the context of social recommendation and recognizes the key drivers of recommendation trust.

This study aims to examine the impact of the decision makers’ risk preference on logistics routing problem, contributing to logistics behavior analysis and route integration optimization under uncertain environment. Due to the unexpected events and complex environment in modern logistics operations, the logistics process is full of uncertainty. Based on the chance function of satisfying the transportation time and cost requirements, this paper focuses on the fourth party logistics routing integrated optimization problem considering the chance preference of decision makers from the perspective of satisfaction.

This study used the quantitative method to investigate the relationship between route decision making and human behavior. The cumulative prospect theory is used to describe the loss, gain and utility function based on confidence levels. A mathematical model and an improved ant colony algorithm are employed to solve the problems. Numerical examples show the effectiveness of the proposed model and algorithm.

The study’s findings reveal that the dual-population improvement strategy enhances the algorithm’s global search capability and the improved algorithm can solve the risk model quickly, verifying the effectiveness of the improvement method. Moreover, the decision-maker is more sensitive to losses, and the utility obtained when considering decision-makers' risk attitudes is greater than that obtained when the decision-maker exhibits risk neutrality.

In an uncertain environment, the logistics decision maker’s risk preference directly affects decision making. Different parameter combinations in the proposed model could be set for decision-makers with different risk attitudes to fit their needs more accurately. This could help managers design effective transportation plans and improve service levels. In addition, the improved algorithm can solve the proposed problem quickly, stably and effectively, so as to help the decision maker to make the logistics path decision quickly according to the required confidence level.

Considering the uncertainty in logistics and the risk behavior of decision makers, this paper studies integrated routing problem from the perspective of opportunity preference. Based on the chance function of satisfying the transportation time and cost requirements, a fourth party logistics routing integrated optimization problem model considering the chance preference of decision makers is established. According to the characteristics of the problem, an improved dual-population ant colony algorithm is designed to solve the proposed model. Numerical examples show the effectiveness the proposed methods.

The purpose of this paper is to understand the natural wind field characteristics of the tunnel entrance section and analyzing the aerodynamic performance of high-speed railway trains (HSRTs) under natural winds.

Three typical tunnel entrance section sites, namely, tunnel–bridge in a dry canyon (TBDC), tunnel–bridge in a river canyon (TBRC) and tunnel–flat ground (TF), are selected to conduct a continuous wind field measurement. Based on the measured wind characteristics, the natural winds of the TBDC and TF sites are reconstituted and imported into the two corresponding full-scale computational fluid dynamics models. The aerodynamic loads of the HSRT running on TBDC and TF with reconstituted winds are simply analyzed.

The von Kármán spectrum can be used to describe the wind field at the tunnel entrance section. In the reconstituted natural wind condition, a time-varying feature of wind speed distribution and leeward side vortex around the HSRT caused by the wind speed fluctuation is found. The fluctuating amplitude of aerodynamic loads at the TBDC infrastructure is up to 97.9% larger than that at the TF infrastructure.

The natural wind characteristics at tunnel entrance sections on the high-speed railway are first measured and analyzed. A numerical reconstitution scheme considering the temporal and spatial variation of natural wind speed is proposed and verified based on field measurement results. The aerodynamic performance of an HSRT under reconstituted natural winds is first investigated.

Precast wall lifting during prefabricated building construction faces multiple non-lean problems, such as inaccurate lifting-time estimation, unreasonable resource allocation and improper process design. This study aims to identify the pathways for improving lifting performance to advance lean construction of prefabricated buildings.

This study developed a methodological framework that integrates the discrete event simulation method, the elimination, combination, rearrangement and simplification (ECRS) technique and intelligent optimization tool. Two schemes of precast wall lifting, namely, the enterprise's business as usual (BAU) and enterprise-leading (EL) schemes, were set to benchmark lifting performance. Furthermore, a best-practice (BP) scheme was modeled from the perspective of lifting activity ECRS and resource allocation for performance optimization.

A real project was selected to test the effect of the methodological framework. The results showed that compared with the EL scheme, the BP scheme reduced the total lifting time (TLT) by 6.3% and mitigated the TLT uncertainty (the gap between the maximum and minimum time values) by 20.6%. Under the BP scheme, increasing the resource inputs produces an insignificant effect in reducing TLT, i.e. increasing the number of component operators in the caulking subprocess from one to two only shortened the TLT by 3.6%, and no further time reduction was achieved as more component operators were added.

To solve non-lean problems associated with prefabricated building construction, this study provides a methodological framework that can separate a typical precast wall lifting process into fine-level activities. Besides, it also identifies the pathways (including the learning effect mitigation, labor and machinery resource adjustment and activities’ improvement) to reducing TLT and its uncertainty.

The purpose of this study is to obtain a titanium mandibular implant that possesses a personalized external shape for appearance recovery, a supporting structure for physiological loading and numerous micro-pores for accelerating osseointegration.

A three-dimensional intact mandibular model of a beagle dog was created from cone-beam computerized tomography scans. A segment of the lower jaw bone was resected and replaced by a personalized implant with comprehensive structures including a customized external shape, supporting structures and micro-pores, which were designed by topology optimization. Then with FEM analysis, the stress, displacement distribution and compliance of the designed implant were compared with the non-optimized model. The weight of the optimized implant that was fabricated by SLM with titanium alloy powder was measured and contrasted with the predicted non-optimized model for evaluating the viability of the design.

The FEM results showed the peaks of von Mises stress and displacement on the optimized implant were much lower than those of the implant without optimization. With topology optimization, the compliance of the implant decreased significantly by 53.3 per cent, and a weight reduction of 37.2 per cent could be noticed.

A design strategy for personalized implant, with comprehensive structures and SLM as the fabrication method, has been developed and validated by taking a canine mandible as the case study. With comprehensive structures, the implant presented good biomechanical behaviors thanks to the most appropriate supporting structures obtained by optimal design. The topological optimal design combined with SLM printing proved to be an effective method for the design and fabrication of personalized implant with complex structures.

Studies of Tianhou-Mazu cult have been focused on three themes: studies in Taiwan emphasize hegemonic order; studies in Hong Kong reveal a relationship of “sisterhood” alliances; and studies in Singapore highlight the important role of ethnic groups. The rebuilding of the goddess’s ancestral temple in early 1980s and her acquiring a world intangible cultural heritage status in the early twenty-first century facilitate the redefinition of overseas Chinese’s religious affiliation. The purpose of this paper is to discuss this global development of the cult from the 1980s and its ritual implication in overseas Chinese communities.

This paper, by comparing the Tianhou-Mazu cult in Taiwan, Hong Kong and Southeast Asian Chinese settlements, argues that from sisters to descended replicas, or from local alliances to global hegemony, the cult of Tianhou-Mazu since the 1980s has not only replaced local culture with an emphasis on “high culture,” but also represents a religious strategy regarding local people’s interpretation of correctness and authority.

This paper argues that despite the imposition of hegemonic power from various authorities, popular religion is a matter of choice. This reflects how local religious practice is construed according to the interpretation of global cultural languages by the elite Chinese; their decision of when and how to reconnect with the goddess’s ancestral temple or the “imperial state,” or to form alliances with other local communities; and the implementation of the local government’s cultural policy.

This paper is one of the few attempts comparing development of a folk cult in various communities.

The purpose of this paper is to target on individual perceptions of BIM practice in terms of BIM benefits, critical success factors (CSFs) and challenges in Chongqing which represented the less BIM-developed metropolitan cities in China.

Adopting a questionnaire-survey approach followed by statistical analysis, the study further divided the survey population from Chongqing into subgroups according to their employer types and organization sizes. A further subgroup analysis adopting statistical approach was conducted to investigate the effects of employer type and organization size on individual perceptions.

Subgroup analysis revealed that governmental employees held more conservative and neutral perceptions toward several items in BIM benefit, CSFs and challenges. It was inferred that smaller organizations with fewer than 100 full-time employees perceived more benefits of BIM in recruiting and retaining employees, and considered more critical of involving companies with BIM knowledge in their projects.

This study contributed to the body of knowledge in managerial BIM in terms that: it extended the research of individual perceptions toward BIM implementation by focusing on less BIM-mature regions; it contributed to previous studies of influencing factors to BIM practice-based perceptions by introducing factors related to organization type and sizes; and it would lead to future research in establishing BIM climate and culture which address perceptions and behaviors in BIM adoption at both individual and organizational levels.

The purpose is to realize precise apicoectomy with less surgical risk and improved quality and efficiency.

First, the procedure of precise apicoectomy based on additive manufacturing (AM) and digital design is proposed. With CT images of the patient's oral, a 3D model of alveolar bone and teeth is reconstructed, and based on this model, the infected tissue and enclosed root tip can be determined. Thus, a surgical plan can be created based on clear anatomical relationships and minimal negative constraints, which will then determine the drill position, direction and depth, as well as the resection length of root tip. With this plan, a surgical guide design is performed via a composite model from reversed plaster models and hard tissue models from CT, and accessory tools including drill with stop plane and handle are also selected. With the surgical guide, the virtual plan in the computer can be realized in the clinic.

With this methodology, the dentist can perform root-end resection with greater accuracy, save more than 30 percent of operatory time, and the discomfort to the patient is reduced to a minimum.

The proposed methodology has been used in ten cases for root-end resections. In fact, this method of designing a computer-based treatment plan with a 3D model of a patient and applying it in the clinic through guiding tools can be used in other surgeries, such as orthognathic surgery or osteotomy.

This case report illustrates that with AM and digital design methods, optimal operational plans can be designed and realized for apicoectomy, and the quality and efficiency of clinical surgery are greatly improved compared with conventional methods.

This paper aimed to examine the relationship between green logistics management (GLM) practices and export intensity of Thai SMEs in food and drinks manufacturing. The research involved carrying out in-depth interviews with ten experts to shed light on factors of GLM practices. The authors used a questionnaire to survey the data amongst 89 SME exporters through purposive sampling with valid 52 responses. The managerial issues related to export intensity, GLM practices, with regards to whether firms followed ISO 14001 and whether they had an employee(s) responsible for environmental management. The findings suggest that greater GLM practices being applied lead to higher export intensity in SME. The results indicate that most SMEs apply GLM practices in all dimensions to gain the benefits from the export market. It also emerged that those following ISO 14001 and/or having an employee(s) were associated with having higher export intensity than those who did not engage in these practices.

There is a growing requirement for a rating system of building information modelling maturity (BIMM) to compare the effectiveness of modelling processes in construction projects. The literature related to BIMM contains theoretical proposals and description of their maturity models. However, the research efforts are limited and lacking substantial theoretical and empirical justifications. This paper is a unique attempt to integrate previous models by performing empirical investigations of key factors for measuring BIMM in construction projects. The paper aims to discuss these issues.

A national survey was designed to extract the perception of 124 BIM-related practitioners and academicians about the conceptual model. Then, exploratory and confirmatory factor analyses were employed to identify and test the key factors underlying the 27 areas.

A principal component factor analysis of the collected data had suggested a five-factor model, which explained 69.839 per cent of the variance. The construct validity of the model was further tested by confirmatory factor analysis. The results indicated that all factors were important in measuring BIMM; however, compared with the factors of technology and people, more emphasis was put on the factors of process and information.

The key value of the paper is to increase the understanding of multi-dimension nature of BIMM through empirical evidence and to provide practitioners and researchers with the insight regarding particular emphasis on the factors related to modelling process and information.