Search results

Malaysia transitions from a pandemic to an endemic state, beginning on April 1, 2022. The dietary intake and physical activity of university students were altered during the COVID-19 pandemic confinement period, but there is limited information on this topic in the post-COVID-19 period. This cross-sectional study aims to understand gender differences in dietary intake and physical activity among university students and investigate the factors influencing their body mass index (BMI) in the post-COVID-19 period.

The questionnaire used in this study comprised three main segments: sociodemographic information, a semiquantitative food frequency questionnaire and the International Physical Activity Questionnaire.

Results indicated that males exhibited significantly higher (p < 0.05) mean intakes of total dietary energy and macronutrients compared to females. Compared to the Malaysian Recommended Nutrient Intakes 2017, 76.4% of males and 68.8% of females had a sufficient daily energy intake. The majority of males (52.7%) and females (46.4%) were moderately physically active. Regression analysis revealed that male university students with lower fiber intake (ß = −0.309, p = 0.002) were significantly associated with higher BMI reading after confounding adjustment. However, a similar trend was not observed in female university students.

Understanding the gender differences in dietary intake and physical activity can provide insights into the development of effective gender-specific health promotion strategies and the formulation of policies aimed at promoting healthier lifestyles among university students in the post-COVID-19 pandemic era.

This study provides insights into the gender differences in the dietary and physical activity habits of university students, as well as the factors influencing their BMI in the post-COVID-19 pandemic era.

The purpose of this study is to determine the relationship between accounting fraud and corporate sustainability.

Companies listed on the Shenzhen Stock Exchange in 2019 are used to estimate a pooled ordinary least square regression model using panel data. Accounting fraud is represented by accounting disclosure, which is measured by its quality and timeliness, while corporate sustainability is measured by earnings management and corporate social responsibility.

Empirical findings support the hypothesis that the quality and timeliness of accounting disclosure have a statistically favorable impact on the management of company earnings and corporate social responsibility, respectively. Accounting fraud also has an impact on the sustainable development of the company.

Although the inferences of this study are limited to Chinese listed companies, this study may interest other scholars to explore similar topics.

The aim of this study is to discern the role of digital finance in driving rural industrial integration and revitalization. Specifically, it intends to shed light on how the deep development of digital finance can contribute to the optimization and transformation of the rural industrial structure. The research further explores the particular effects of this financial transformation in the central and western regions of China.

This research studies the influence of digital finance on rural industrial integration across 30 Chinese provinces from 2011 to 2020. Utilizing the entropy weight method, a comprehensive evaluation index system is established to gauge the level of rural industrial integration. A two-way fixed effects model, intermediary effect model, and threshold effect model are employed to decipher the relationship between digital finance and rural industrial integration.

Findings reveal a positive relationship between digital finance and rural industrial integration. A single threshold feature was identified: beyond a traditional finance development level, the marginal effect of digital finance on rural industrial integration increases. These effects are more noticeable in central and western regions.

Empirical outcomes contribute to policy discourse on rural digital finance, assisting policymakers in crafting effective strategies. Understanding the threshold of traditional finance development provides a new perspective on the potential of digital finance to drive rural industrial integration.

Traditional robot arm trajectory planning methods have problems such as insufficient generalization performance and low adaptability. This paper aims to propose a method to plan the robot arm’s trajectory using the trajectory learning and generalization characteristics of dynamic motion primitives (DMPs).

This study aligns multiple demonstration motion primitives using dynamic time warping; use the Gaussian mixture model and Gaussian mixture regression methods to obtain the ideal primitive trajectory actions. By establishing a system model that improves DMPs, the parameters of the nonlinear function are learned based on the ideal primitive trajectory actions of the robotic arm, and the robotic arm motion trajectory is reproduced and generalized.

Experiments have proven that the robot arm motion trajectory learned by the method proposed in this article can not only learn to generalize and demonstrate the movement trend of the primitive trajectory, but also can better generate ideal motion trajectories and avoid obstacles when there are obstacles. The maximum Euclidean distance between the generated trajectory and the demonstration primitive trajectory is reduced by 29.9%, and the average Euclidean distance is reduced by 54.2%. This illustrates the feasibility of this method for robot arm trajectory planning.

It provides a new method for the trajectory planning of robotic arms in unstructured environments while improving the adaptability and generalization performance of robotic arms in trajectory planning.

This paper aims to characterize the surface film formed on Alloys 800 and 690 in chloride and thiosulfate-containing solution at 300°C.

Alloy 800 and 690 were immersed in chloride and thiosulfate-containing solution at 300°C up to five days, and then the surface film was analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy dispersive X-ray spectrometers (EDX).

Through static immersion experiments in a high-temperature and high-pressure water environment, the alloy samples covered by surface film after five days of immersion were obtained. The morphology of the surface film was characterized at both horizontal and cross-sectional scales using SEM and focused ion beam-TEM techniques. It was observed that due to the influence of the quartz lining, the surface film primarily exhibited a bilayered structure. The first layer contained a significant amount of SiO₂, with a higher content of metal hydroxides compared to metal oxides. The second layer was predominantly composed of Fe, Ni and Cr, with a higher content of metal oxides compared to metal hydroxides.

The results showed that the materials of the lining of the autoclave could significantly influence the film composition of the tested material, which should be paid attention when analyzing the corrosion mechanism at high temperature.

Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.

This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.

A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.

Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.

This study aims to focus on the supply chain (SC) cost drivers of healthcare industries in the USA, as SC costs have increased 40% over the last decade. The second-most significant expense, the SC, accounts for 38% of total expenses in a typical hospital, while most other industries can operate within 10% of their operating cost. This makes healthcare centers supply-chain-sensitive organizations with limited facilities for high-quality healthcare services. As the cost drivers of healthcare SC are almost unknown to managers, their jobs become more complex.

Guided by pragmatism and positivism paradigms, a cross-sectional study has been designed using quantitative and deductive approaches. Both primary and secondary data were used. Primary data were collected from health centers across the country, and secondary data were from healthcare-related databases. This study examined the attributes that explain the most significant variation in each contributing factor. With multiple regression analysis for predicting cost and Student's t-tests for the significance of contributing factors, the authors of this study examined different theories, including the market-based view and five-forces, network and transaction cost analysis.

This study revealed that supply, materials and services represent the most significant expenses in primary care. Supply-chain cost breakdown results in four critical factors: facility, inventory, information and transportation.

This study examined the data from primary and secondary care institutions. Tertiary and quaternary care systems were not included. Although tertiary and quaternary care systems represent a small portion of the healthcare system, future research should address the supply chain costs of highly specialized organizations.

This study suggests methods that can help to improve supply chain operations in healthcare organizations worldwide.

This study presents an empirically proven methodology for testing the statistical significance of the primary factors contributing to healthcare supply chain costs. The results of this study may lead to positive policy changes to improve healthcare organizations' efficiency and increase access to high-quality healthcare.

The stress concentration factor (SCF) is commonly utilized to assess the fatigue life of a tubular T-joint in offshore structures. Parametric equations derived from experimental testing and finite element analysis (FEA) are utilized to estimate the SCF efficiently. The mathematical equations provide the SCF at the crown and saddle of tubular T-joints for various load scenarios. Offshore structures are subjected to a wide range of stresses from all directions, and the hotspot stress might occur anywhere along the brace. It is critical to incorporate stress distribution since using the single-point SCF equation can lead to inaccurate hotspot stress and fatigue life estimates. As far as we know, there are no equations available to determine the SCF around the axis of the brace.

A mathematical model based on the training weights and biases of artificial neural networks (ANNs) is presented to predict SCF. 625 FEA simulations were conducted to obtain SCF data to train the ANN.

Using real data, this ANN was used to create mathematical formulas for determining the SCF. The equations can calculate the SCF with a percentage error of less than 6%.

Engineers in practice can use the equations to compute the hotspot stress precisely and rapidly, thereby minimizing risks linked to fatigue failure of offshore structures and assuring their longevity and reliability. Our research contributes to enhancing the safety and reliability of offshore structures by facilitating more precise assessments of stress distribution.

Precisely determining the SCF for the fatigue life of offshore structures reduces the potential hazards associated with fatigue failure, thereby guaranteeing their longevity and reliability. The present study offers a systematic approach for using FEA and ANN to calculate the stress distribution along the weld toe and the SCF in T-joints since ANNs are better at approximating complex phenomena than standard data fitting techniques. Once a database of parametric equations is available, it can be used to rapidly approximate the SCF, unlike experimentation, which is costly and FEA, which is time consuming.

This study aimed to review various existing methods for improving the quality of recycled concrete aggregates (RCAs) as a possible substitution for natural aggregates (NAs) in concrete. It is vital as the old paste attached to the RCA weakens its structure. It is due to the porous structure of the RCA with cracks, weakening the interfacial transition zone (ITZ) between the RCA and binding material, negatively impacting the concrete's properties. To this end, various methods for reinforcement of the RCA, cleaning the RCA's old paste and enhancing the quality of the RCA-based concrete without RCA modification are studied in terms of environmental effects, cost and technical matters. Furthermore, this research sought to identify gaps in knowledge and future research directions.

The review of the relevant journal papers revealed that various methods exist for improving the properties of RCAs and RCA-based concrete. A decision matrix was developed and implemented for ranking these techniques based on environmental, economic and technical criteria.

The identified methods for reinforcement of the RCA include accelerated carbonation, bio deposition, soaking in polymer emulsions, soaking in waterproofing admixture, soaking in sodium silicate, soaking in nanoparticles and coating with geopolymer slurry. Moreover, cleaning the RCA's old paste is possible using acid, water, heating, thermal and mechanical treatment, thermo-mechanical and electro-dynamic treatment. Added to these treatment techniques, using RCA in saturated surface dry (SSD) mixing approaches and adding fibres or pozzolana enhance the quality of the RCA-based concrete without RCA modification. The study ranked these techniques based on environmental, economic and technical criteria. Ultimately, adding fibres, pozzolana and coating RCA with geopolymer slurry were introduced as the best techniques based on the nominated criteria.

The study supported the need for better knowledge regarding the existing treatment techniques for RCA improvement. The outcomes of this research offer an understanding of each RCA enrichment technique's importance in environmental, economic and technical criteria.

The practicality of the RCA treatment techniques is based on economic, environmental and technical specifications for rating the existing treatment techniques.

This study aims to develop and validate a multidimensional scale to measure the motivating factors that lead to opportunity recognition in social entrepreneurship among higher education institute (HEI) students.

The scale was developed through two phases; in phase 1, semi-structured interviews with social entrepreneurs and aspiring students were conducted to explore themes for item generation. Phase 2 included developing and validating the scale using exploratory (EFA) and confirmatory factor analysis (CFA). The sample included HEI students (n = 300 for EFA, n = 300 for CFA) with either academic background or volunteering experiences in social entrepreneurship.

A 24-item scale is developed in the study, with six factors measuring the motivating factors influencing opportunity recognition in social entrepreneurship: life experiences, social awareness, social inclination, community development, institutional voids and natural option for a meaningful career.

The scale facilitates the development of theories and models in social entrepreneurship. The scale also enables policymakers and social entrepreneurship educators to understand the motivating factors that lead to opportunity recognition among students. It would help them to provide target-specific support to students.

To the best of the authors’ knowledge, this study is the first attempt to develop a scale that measures opportunity recognition in social entrepreneurship based on specific motivating factors. The study used the model by Yitshaki and Kropp (2016) as the conceptual framework. This study is the first attempt to triangulate the model’s findings using a quantitative methodology and through the development of a measurement scale. Besides, the scale adds value to social entrepreneurship research, which lacks empirical research on HEI students.