Search results

Automatic dependent surveillance-broadcast (ADS-B) is the foundational technology of the next generation air transportation system defined by Federal Aviation Authority and is one of the most precise ways for tracking aircraft position. ADS-B is intended to provide greater situational awareness to the pilots by displaying the traffic information like aircraft ID, altitude, speed and other critical parameters on the Cockpit Display of Traffic Information displays in the cockpit. Unfortunately, due to the initial proposed nature of ADS-B protocol, it is neither encrypted nor has any other innate security mechanisms, which makes it an easy target for malicious attacks. The system is vulnerable to various active and passive attacks like message ingestion, message deletion, eavesdropping, jamming, etc., which has become an area of concern for the aviation industry. The purpose of this study is to propose a method based on modified advanced encryption standard (AES) algorithm to secure the ADS=B messages and increase the integrity of ADS-B data transmissions.

Though there are various cryptographic and non-cryptographic methods proposed to secure ADS-B data transmissions, it is evident that most of these systems have limitations in terms of cost, implementation or feasibility. The new proposed method implements AES encryption techniques on the ADS-B data on the sender side and correlated decryption mechanism at the receiver end. The system is designed based on the flight schedule data available from any flight planning systems and implementing the AES algorithm on the ADS-B data from each aircraft in the flight schedule.

The suitable hardware was developed using Raspberry pi, ESP32 and Ra-02. Several runs were done to verify the original message, transmitted data and received data. During transmission, encryption algorithm was being developed, which has got very high secured transmission, and during the reception, the data was secured. Field test was conducted to validate the transmission and quality. Several trials were done to validate the transmission process. The authors have successfully shown that the ADS-B data can be encrypted using AES algorithm. The authors are successful in transmitting and receiving the ADS-B data packet using the discussed hardware and software methodology. One major advantage of using the proposed solution is that the information received is encrypted, and the receiver ADS-B system can decrypt the messages on the receiving end. This clearly proves that when the data is received by an unknown receiver, the messages cannot be decrypted, as the receiver is not capable of decrypting the AES-authenticated messages transmitted by the authenticated source. Also, AES encryption is highly unlikely to be decrypted if the encryption key and the associated decryption key are not known.

Implementation of the developed solution in actual onboard avionics systems is not within the scope of this research. Hence, assessing in the real-time distances is not covered.

The authors propose to extend this as a software solution to the onboard avionics systems by considering the required architectural changes. This solution can also bring in positive results for unmanned air vehicles in addition to the commercial aircrafts. Enhancement of security to the key operational and navigation data elements is going to be invaluable for future air traffic management and saving lives of people.

The proposed solution has been practically implemented by developing the hardware and software as part of this research. This has been clearly brought out in the paper. The implementation has been tested using the actual ADS-B data/messages received from using the ADS-B receiver. The solution works perfectly, and this brings immense value to the aircraft-to-aircraft and aircraft-to-ground communications, specifically while using ADS-B data for communicating the position information. With the proposed architecture and minor software updates to the onboard avionics, this solution can enhance safety of flights.

This paper aims to highlight the expanding link between facility management (FM) and building automation and control systems (BACS) through a review of literature. It examines the opportunities and challenges of BACS for facility managers and proposes solutions for mitigating the risks associated with BACS implementation.

This paper reviews various research papers to explore the positive influences of BACS on FM, such as support with strategic decision-making, predictive maintenance, energy efficiency and comfort improvement. It also discusses the challenges of BACS, including obsolescence, interoperability, vendor lock-in, reliability and security risks and suggests potential solutions based on existing literature.

BACS offers numerous opportunities for facility managers, such as improved decision-making, energy efficiency and comfort levels in office buildings. However, there are also risks associated with BACS implementation, including obsolescence, interoperability, vendor lock-in, reliability and security risks. These risks can be mitigated through measures such as hardware and software obsolescence management plans, functional requirement lists, wireless communication protocols, advanced feedback systems and increased awareness about BACS security.

To the best of the authors’ knowledge, no prior academic research has been conducted on the expanding link between FM and BACS. Although some papers have touched upon the opportunities and challenges of BACS for FM, this paper aims to provide a comprehensive overview of these findings by consolidating existing literature.

Automatic modulation recognition (AMR) is a challenging problem in intelligent communication systems and has wide application prospects. At present, although many AMR methods based on deep learning have been proposed, the methods proposed by these works cannot be directly applied to the actual wireless communication scenario, because there are usually two kinds of dilemmas when recognizing the real modulated signal, namely, long sequence and noise. This paper aims to effectively process in-phase quadrature (IQ) sequences of very long signals interfered by noise.

This paper proposes a general model for a modulation classifier based on a two-layer nested structure of long short-term memory (LSTM) networks, called a two-layer nested structure (TLN)-LSTM, which exploits the time sensitivity of LSTM and the ability of the nested network structure to extract more features, and can achieve effective processing of ultra-long signal IQ sequences collected from real wireless communication scenarios that are interfered by noise.

Experimental results show that our proposed model has higher recognition accuracy for five types of modulation signals, including amplitude modulation, frequency modulation, gaussian minimum shift keying, quadrature phase shift keying and differential quadrature phase shift keying, collected from real wireless communication scenarios. The overall classification accuracy of the proposed model for these signals can reach 73.11%, compared with 40.84% for the baseline model. Moreover, this model can also achieve high classification performance for analog signals with the same modulation method in the public data set HKDD_AMC36.

At present, although many AMR methods based on deep learning have been proposed, these works are based on the model’s classification results of various modulated signals in the AMR public data set to evaluate the signal recognition performance of the proposed method rather than collecting real modulated signals for identification in actual wireless communication scenarios. The methods proposed in these works cannot be directly applied to actual wireless communication scenarios. Therefore, this paper proposes a new AMR method, dedicated to the effective processing of the collected ultra-long signal IQ sequences that are interfered by noise.

In order to meet the different quality of service (QoS) requirements of vehicle-to-infrastructure (V2I) and multiple vehicle-to-vehicle (V2V) links in vehicle networks, an efficient V2V spectrum access mechanism is proposed in this paper.

A long-short-term-memory-based multi-agent hybrid proximal policy optimization (LSTM-H-PPO) algorithm is proposed, through which the distributed spectrum access and continuous power control of V2V link are realized.

Simulation results show that compared with the baseline algorithm, the proposed algorithm has significant advantages in terms of total system capacity, payload delivery success rate of V2V link and convergence speed.

The LSTM layer uses the time sequence information to estimate the accurate system state, which ensures the choice of V2V spectrum access based on local observation effective. The hybrid PPO framework shares training parameters among agents which speeds up the entire training process. The proposed algorithm adopts the mode of centralized training and distributed execution, so that the agent can achieve the optimal spectrum access based on local observation information with less signaling overhead.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S₁₁/S₂₂ ≤ 10 dB), transmission coefficient/insertion loss (IL) (S₁₂/S₂₁: 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices.

Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency.

Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end.

The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory.

The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

Agriculture is the backbone of a country, contributing more than half of the sector of economy throughout the world. The need for precision agriculture is essential in evaluating the conditions of the crops with the aim of determining the proper selection of pesticides. The conventional method of pest detection fails to be stable and provides limited accuracy in the prediction. This paper aims to propose an automatic pest detection module for the accurate detection of pests using the hybrid optimization controlled deep learning model.

The paper proposes an advanced pest detection strategy based on deep learning strategy through wireless sensor network (WSN) in the agricultural fields. Initially, the WSN consisting of number of nodes and a sink are clustered as number of clusters. Each cluster comprises a cluster head (CH) and a number of nodes, where the CH involves in the transfer of data to the sink node of the WSN and the CH is selected using the fractional ant bee colony optimization (FABC) algorithm. The routing process is executed using the protruder optimization algorithm that helps in the transfer of image data to the sink node through the optimal CH. The sink node acts as the data aggregator and the collection of image data thus obtained acts as the input database to be processed to find the type of pest in the agricultural field. The image data is pre-processed to remove the artifacts present in the image and the pre-processed image is then subjected to feature extraction process, through which the significant local directional pattern, local binary pattern, local optimal-oriented pattern (LOOP) and local ternary pattern (LTP) features are extracted. The extracted features are then fed to the deep-convolutional neural network (CNN) in such a way to detect the type of pests in the agricultural field. The weights of the deep-CNN are tuned optimally using the proposed MFGHO optimization algorithm that is developed with the combined characteristics of navigating search agents and the swarming search agents.

The analysis using insect identification from habitus image Database based on the performance metrics, such as accuracy, specificity and sensitivity, reveals the effectiveness of the proposed MFGHO-based deep-CNN in detecting the pests in crops. The analysis proves that the proposed classifier using the FABC+protruder optimization-based data aggregation strategy obtains an accuracy of 94.3482%, sensitivity of 93.3247% and the specificity of 94.5263%, which is high as compared to the existing methods.

The proposed MFGHO optimization-based deep-CNN is used for the detection of pest in the crop fields to ensure the better selection of proper cost-effective pesticides for the crop fields in such a way to increase the production. The proposed MFGHO algorithm is developed with the integrated characteristic features of navigating search agents and the swarming search agents in such a way to facilitate the optimal tuning of the hyperparameters in the deep-CNN classifier for the detection of pests in the crop fields.

Contemporary technological disruptions are espoused as though they stimulate sustainable growth in the built environment through the Green Internet of Things (G-IoT). Learning from discipline-specific experiences, this paper articulates recent advancements in the knowledge and concepts of G-IoT in relation to the construction and smart city sectors. It provides a scoping review for G-IoT as an overlooked dimension. Attention was paid to modern circularity, cleaner production and sustainability as key benefits of G-IoT adoption in line with the United Nations’ Sustainable Development Goals (UN-SDGs). In addition, this study also investigates the current application and adoption strategies of G-IoT.

This study uses the Preferred Reporting Items for Systematic and Meta-Analyses (PRISMA) review approach. Resources are drawn from Scopus and Web of Science repositories using apt search strings that reflect applications of G-IoT in the built environment in relation to construction management, urban planning, societies and infrastructure. Thematic analysis was used to analyze pertinent themes in the retrieved articles.

G-IoT is an overlooked dimension in construction and smart cities so far. Thirty-three scholarly articles were reviewed from a total of 82 articles retrieved, from which five themes were identified: G-IoT in buildings, computing, sustainability, waste management and tracking and monitoring. Among other applications, findings show that G-IoT is prominent in smart urban services, healthcare, traffic management, green computing, environmental protection, site safety and waste management. Applicable strategies to hasten adoption include raising awareness, financial incentives, dedicated work approaches, G-IoT technologies and purposeful capacity building among stakeholders. The future of G-IoT in construction and smart city research is in smart drones, building information modeling, digital twins, 3D printing, green computing, robotics and policies that incentivize adoption.

This study adds to the normative literature on envisioning potential strategies for adoption and the future of G-IoT in construction and smart cities as an overlooked dimension. No previous study to date has reviewed pertinent literature in this area, intending to investigate the current applications, adoption strategies and future direction of G-IoT in construction and smart cities. Researchers can expand on the current study by exploring the identified G-IoT applications and adoption strategies in detail, and practitioners can develop implementation policies, regulations and guidelines for holistic G-IoT adoption.

The goal of this research is to analyse the obstacles to the implementation of mobile health (mHealth) in India and to gain an understanding of the contextual inter-relationships that exist amongst those obstacles.

Potential barriers and their interrelationships in their respective contexts have been uncovered. Using MICMAC analysis, the categorization of these barriers was done based on their degree of reliance and driving power (DP). Furthermore, an interpretive structural modeling (ISM) framework for the barriers to mHealth activities in India has been proposed.

The study explores a total of 15 factors that reduce the efficiency of mHealth adoption in India. The findings of the Matrix Cross-Reference Multiplication Applied to a Classification (MICMAC) investigation show that the economic situation of the government, concerns regarding the safety of intellectual technologies and privacy issues are the primary obstacles because of the significant driving power they have in mHealth applications.

Promoters of mHealth practices may be able to make better plans if they understand the social barriers and how they affect each other; this leads to easier adoption of these practices. The findings of this study might be helpful for governments of developing nations to produce standards relating to the deployment of mHealth; this will increase the efficiency with which it is adopted.

At this time, there is no comprehensive analysis of the factors that influence the adoption of mobile health care with social cognitive theory in developing nations like India. In addition, there is a lack of research in investigating how each of these elements affects the success of mHealth activities and how the others interact with them. Because developed nations learnt the value of mHealth practices during the recent pandemic, this study, by investigating the obstacles to the adoption of mHealth and their inter-relationships, makes an important addition to both theory and practice.

Some studies have been reported in the past on diaphragmatic hernia (DH) surgery techniques using additive manufacturing (AM) technologies, symptoms of a hernia and post-surgery complications. But hitherto little has been reported on bibliographic analysis (BA) for health monitoring of bovine post-DH surgery for long-term management. Based on BA, this study aims to explore the sensor fabrication integrated with innovative AM technologies for health monitoring assistance of bovines post-DH surgery.

A BA based on the data extracted through the Web of Science database was performed using bibliometric tools (R-Studio and Biblioshiny).

After going through the BA and a case study, this review provides information on various 3D-printed meshes used over the sutured site and available Internet of Things-based solutions to prevent the recurrence of DH.

Research gaps exist for 3D-printed conformal sensors for health monitoring of bovine post-DH surgery.