Search results
1 – 4 of 4Adriana Gorea, Amy Dorie and Martha L. Hall
This study aims to investigate if engineered compression variations using moisture-responsive knitted fabric design can improve breast support in seamless knitted sports bras.
Abstract
Purpose
This study aims to investigate if engineered compression variations using moisture-responsive knitted fabric design can improve breast support in seamless knitted sports bras.
Design/methodology/approach
An experimental approach was used to integrate a novel moisture-responsive fabric panel into a seamless knitted bra, and the resulting compression variability in dry versus wet conditions were compared with those of a control bra. Air permeability and elongation testing of between breasts fabric panels was conducted in dry and wet conditions, followed by three-dimensional body scanning of eight human participants wearing the two bras in similar conditions. Questionnaires were used to evaluate perceived comfort and breast support of both bras in both conditions.
Findings
Air permeability test results showed that the novel panel had the highest variance between dry and wet conditions, confirming its moisture-responsive design, and increased its elongation coefficient in both wale and course directions in wet condition. There were significant main effects of bra type and body location on breast compression measurements. Breast circumferences in the novel bra were significantly larger than in the control bra condition. The significant two-way interaction between bra type and moisture condition showed that the control bra lost compressive power in wet condition, whereas the novel bra became more compressive when wet. Changes in compression were confirmed by participants’ perception of tighter straps and drier breast comfort.
Originality/value
These findings add to the limited scientific knowledge of moisture adaptive bra design using engineered knitted fabrics via advanced manufacturing technologies, with possible applications beyond sports bras, such as bras for breast surgery recovering patients.
Details
Keywords
Fatima Iftikhar, Suleman Anis, Umar Bin Asad, Shagufta Riaz, Muntaha Rafiq and Salman Naeem
Carpal tunnel syndrome (CTS) is a hand disease caused by the pressing of the median nerve present in the palmar side of the wrist. It causes severe pain in the wrist, triggering…
Abstract
Purpose
Carpal tunnel syndrome (CTS) is a hand disease caused by the pressing of the median nerve present in the palmar side of the wrist. It causes severe pain in the wrist, triggering disturbance during sleep. Different products like splints, braces and gloves are available in the market to alleviate this disease but there was still a need to improve the wearability, comfort and cost of the product. This study was about designing a comfortable and cost-effective wearable system for mild-to-moderate CTS. Transcutaneous electrical nerve stimulation (TENS) therapy has been used to reduce the pain in the wrist.
Design/methodology/approach
After simulation by using Proteus software (which allowed the researchers to draw and simulate electrical circuits using ISIS, ARES and PCB design tools virtually), the circuit with optimum frequency, i.e. 33 Hz was selected, and the circuit was developed on a printed circuit board (PCB). The developed circuit was integrated successfully into the half glove structure.
Findings
The developed product had good thermophysiological comfort and hand properties as compared to the commercially available product of the same kind. In vivo testing (It involves the testing with living subjects like animals, plants or human beings) was performed which resulted in 85% confirmed viability of the product against CTS. A glove with an integrated circuit was developed successfully to accommodate various sizes without any sex specifications in a cost-effective way to mitigate the issue of CTS.
Research limitations/implications
Industrial workers, individuals frequently using their hands or those diagnosed with CTS may wish to use this product as therapy. The attention could not be paid to the aesthetic or visual appeal of the developed product.
Originality/value
A very comfortable glove with integrated TENS electrodes was developed successfully to accommodate various sizes without any sex specifications in a cost-effective way to mitigate the issues of CTS.
Details
Keywords
Samridhi Garg, Monica Puri Sikka and Vinay Kumar Midha
Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable…
Abstract
Purpose
Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.
Design/methodology/approach
This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.
Findings
Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.
Originality/value
The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.
Details
Keywords
Zhao Yuhang, Zhicai Yu, Hualing He and Huizhen Ke
This study aims to fabricate a multifunctional electromagnetic interference (EMI) shielding composite fabric with simultaneous high-efficiency photothermal conversion and Joule…
Abstract
Purpose
This study aims to fabricate a multifunctional electromagnetic interference (EMI) shielding composite fabric with simultaneous high-efficiency photothermal conversion and Joule heating performances.
Design/methodology/approach
A multifunctional polypyrrole (PPy) hydrogel/multiwalled carbon nanotube (MWCNT)/cotton EMI shielding composite fabric (hereafter denoted as PHMC) was prepared by loading MWCNT onto tannin-treated cotton fabric, followed by in situ crosslinking-polymerization to synthesize three-dimensional (3D) conductive networked PPy hydrogel on the surface of MWCNT-coated cotton fabric.
Findings
Benefiting from the unique interconnected 3D networked conductive structure of PPy hydrogel, the obtained PHMC exhibited a high EMI-shielding effectiveness vale of 48 dB (the absorbing electromagnetic wave accounted for 84%) within a large frequency range (8.2–12.4 GHz). Moreover, the temperature of the laminated fabric reached 54°C within 900 s under 15 V, and it required more than 100 s to return to room temperature (28.7°C). When the light intensity was adjusted to 150 mW/cm2, the PHMC temperature was about 38.2°C after lighting for 900 s, indicating high-efficiency electro-photothermal effect function.
Originality/value
This paper provides a novel strategy for designing a type of multifunctional EMI shielding composite fabric with great promise for wearable smart garments, EMI shielding and personal heating applications.
Details