Search results

A wireless body area network (WBAN) plays a crucial role in the health-care domain. With the emergence of technologies like the internet of things, there is increased usage of WBAN for providing quality health services. With wearable devices and sensors associated with human body, patient’s vital signs are captured and sent to doctor. The WBAN has number of sensor nodes that are resource constrained. The communications among the nodes are very crucial as human health information is exchanged. The purpose of this paper aims to have Quality of Service (QoS) with energy aware and control overhead aware. Maximizing network lifetime is also essential for the improved quality in services. There are many existing studies on QoS communications in WBAN.

In this paper, with the aim of energy-efficient WBAN for QoS, a cross-layer routing protocol is designed and implemented. A cross-layer routing protocol that is ad hoc on-demand distance vector (AODV)-based, energy and control overhead-aware (AODV-ECOA) is designed and implemented for energy-efficient routing in WBAN. The cross-layer design that involves multiple layers of open systems interconnection reference model, which will improve energy efficiency and thus QoS.

Implementation is simulated using the network simulator tool, i.e. NS-2. The proposed cross-layer routing protocol AODV-ECOA shows least bandwidth requirement by control packets, leading to less control overhead, highest packet delivery ratio and energy efficiency. The experimental results revealed that AODV-ECOA shows better performance over existing protocols such as AODV and POLITIC.

An efficient control overhead reduction algorithm is proposed for reducing energy consumption further and improves performance of WBAN communications to realize desired QoS.

Wireless Body Area Network (WBAN) technology envisions a network in which sensors continuously operate on and obtained critical physical and physiological readings. Sensors deployed in WBANs have restricted resources such as battery energy, computing power and bandwidth. We can utilize these resources efficiently. By devising a mechanism that is energy efficient with following characteristics, i.e. computational complexity is less, routing overhead is minimized, and throughput will be maximum. A lot of work has been done in this area but still WBAN faces some challenges like mobility, network lifetime, transmission range, heterogeneous environment, and limited resources. In the present years well, contemplative studies have been made through a large body to reach some holistic points pertaining to the energy consumption in WBAN. Thus we/put forward appropriate algorithm for energy efficiency which can vividly corroborate the advances in this specific domain. We have also focused on various aspects and phases of the studies like study computational complexity, routing overhead and throughput type of characteristics. There is still a room for improvement to get the desired energy optimization in WBAN. The network performance mainly relies upon the algorithm used for optimization process. In this work, we intended to develop an energy optimization algorithm for energy consumption in WBAN which is based on evolutionary algorithms for inter-BAN communications using cluster-based routing protocol.

In this paper we propose a meta heuristics algorithm Goa to solve the optimization problem in WBAN. Grasshopper is an insect. Generally, this insect is viewed individually and creating large swarm in nature. Figure 5 shows the individual grasshoppers' primitive patterns in swarm. Figure 7 depicts the pseudo code of Goa. In Goa, experiments are done to view the behavior of grasshoppers in swarm. How they gradually move towards the stationary and mobile target. Through experimentation it is conceived that swarm gradually converge towards their target. Another interesting pattern related to convergence of grasshopper is that it slowly towards its target. This shows that grasshopper does not trapped in local optima. In starting iterations of exploration process Goa, search globally and in last iterations it searches local optima. Goa makes the exploration and exploitation process balanced while solving challenging optimization problems.

Energy efficiency is achieved in the optimization process of cluster formation process. As the use of proposed algorithm Goa creates the optimal number of clusters. Shorter cluster lifetime means more times clustering procedure is called. It increases the network computational cost and the communication overhead. Experimentation results show that proposed Goa algorithm performs well. We compare the results of Goa with existing optimization Algorithms ACO and MFO. Results are generated using MATLAB.

A lot of work has done for the sake of energy optimization in WBAN. Many algorithms are proposed in past for energy optimization of WBAN. All of them have some strengths and weaknesses. In this paper we propose a nature inspired algorithm Goa. We use the Goa algorithm for the sake of energy optimization in WBAN.

This paper aims to present a non-linear mathematical model-based routing protocol for wireless body area networks (WBANs). Two non-linear mathematical models for WBANs are used in the proposed protocols Model 1 and Model 2. Model 1 intends to improve the data transmission rate and Model 2 intends to reduce energy consumption in the WBANs. These models are simulated for fixed deployment and priority-based data transmission, and performance of the network is analyzed under four constraints on WBANs.

Advancements in wireless technology play a vital role in several applications such as electronic health care, entertainment and games. Though WBANs are widely used in digital health care, they have restricted battery capacity which affects network stability and data transmission. Therefore, several research studies focused on reducing energy consumption and maximizing the data transmission rate in WBANs.

Simulation results of the proposed protocol exhibit superior performance in terms of four network constraints such as residual energy, the stability of the network, path loss and data transmission rate in contrast with conventional routing protocols. The performance improvement of these parameters confirms that the proposed algorithm is more reliable and consumes less energy than traditional algorithms.

The Model 1 of the proposed work provides maximum data extraction, which ensures reliable data transmission in WBANs. The Model 2 allocates minimal hop count path between the sink and the sensor nodes, which minimizes energy consumption in the WBANs.

A wireless body area network (WBAN) is a collection of sensing devices attached to a person’s body that is typically used during health care to track their physical state. This paper aims to study the security challenges and various attacks that occurred while transferring a person’s sensitive medical diagnosis information in WBAN.

This technology has significantly gained prominence in the medical field. These wearable sensors are transferring information to doctors, and there are numerous possibilities for an intruder to pose as a doctor and obtain information about the patient’s vital information. As a result, mutual authentication and session key negotiations are critical security challenges for wearable sensing devices in WBAN. This work proposes an improved mutual authentication and key agreement protocol for wearable sensing devices in WBAN. The existing related schemes require more computational and storage requirements, but the proposed method provides a flexible solution with less complexity.

As sensor devices are resource-constrained, proposed approach only makes use of cryptographic hash-functions and bit-wise XOR operations, hence it is lightweight and flexible. The protocol’s security is validated using the AVISPA tool, and it will withstand various security attacks. The proposed protocol’s simulation and performance analysis are compared to current relevant schemes and show that it produces efficient outcomes.

This technology has significantly gained prominence in the medical sector. These sensing devises transmit information to doctors, and there are possibilities for an intruder to pose as a doctor and obtain information about the patient’s vital information. Hence, this paper proposes a lightweight and flexible protocol for mutual authentication and key agreement for wearable sensing devices in WBAN only makes use of cryptographic hash-functions and bit-wise XOR operations. The proposed protocol is simulated using AVISPA tool and its performance is better compared to the existing methods. This paper proposes a novel improved mutual authentication and key-agreement protocol for wearable sensing devices in WBAN.

For achieving the profitable human activity recognition (HAR) method, this paper solves the HAR problem under wireless body area network (WBAN) using a developed ensemble learning approach. The purpose of this study is,to solve the HAR problem under WBAN using a developed ensemble learning approach for achieving the profitable HAR method. There are three data sets used for this HAR in WBAN, namely, human activity recognition using smartphones, wireless sensor data mining and Kaggle. The proposed model undergoes four phases, namely, “pre-processing, feature extraction, feature selection and classification.” Here, the data can be preprocessed by artifacts removal and median filtering techniques. Then, the features are extracted by techniques such as “t-Distributed Stochastic Neighbor Embedding”, “Short-time Fourier transform” and statistical approaches. The weighted optimal feature selection is considered as the next step for selecting the important features based on computing the data variance of each class. This new feature selection is achieved by the hybrid coyote Jaya optimization (HCJO). Finally, the meta-heuristic-based ensemble learning approach is used as a new recognition approach with three classifiers, namely, “support vector machine (SVM), deep neural network (DNN) and fuzzy classifiers.” Experimental analysis is performed.

The proposed HCJO algorithm was developed for optimizing the membership function of fuzzy, iteration limit of SVM and hidden neuron count of DNN for getting superior classified outcomes and to enhance the performance of ensemble classification.

The accuracy for enhanced HAR model was pretty high in comparison to conventional models, i.e. higher than 6.66% to fuzzy, 4.34% to DNN, 4.34% to SVM, 7.86% to ensemble and 6.66% to Improved Sealion optimization algorithm-Attention Pyramid-Convolutional Neural Network-AP-CNN, respectively.

The suggested HAR model with WBAN using HCJO algorithm is accurate and improves the effectiveness of the recognition.

The purpose of this paper is to compare the properties of simplified physical and corresponding numerical human body models (phantoms) and verify their applicability to path loss modeling in narrowband and ultra-wideband on-body wireless body area networks (WBANs). One of the models has been proposed by the authors.

Two simplified numerical and two physical phantoms for body area network on-body channel computer simulation and field measurement results are presented and compared.

Computer simulations and measurements which were carried out for the proposed simplified six-cylinder model with various antenna locations lead to the general conclusion that the proposed phantom can be successfully used for experimental investigation and testing of on-body WBANs both in ISM and UWB IEEE 802.15.6 frequency bands.

Usage of the proposed phantoms for the simulation/measurement of the specific absorption rate and for off-body channels are not within the scope of this paper.

The proposed simplified phantom can be easily made with a low cost in other laboratories and be used both for research and development of WBAN technologies. The model is most suitable for wearable antenna radiation pattern simulation and measurement.

Presented results facilitate applications of WBANs in medicine and health monitoring.

A new six-cylinder phantom has been proposed. The proposed simplified phantom can be easily made with a low cost in other laboratories and be used both for research and development of WBAN technologies.

Security of wireless body area network communication is highly important as it directly impacts human life. This paper aims to focus on battlefield application area of WBAN for implementing security where data must be protected against various possible attacks before delivering over a public network.

Providing a strong security system is still a research challenge due to low computational power of used sensors for protecting transmission data. In this paper, the authors have proposed an optimized security solution for multithreaded wireless body area network (MWBAN) using trust-based distributed group key management technique to overcome the drawbacks of existing elliptical curve cryptography-homomorphism (ECC-Homomorphism) scheme as well as coded cooperative data exchange group key management (CCDE_GKM) scheme.

The proposed optimized security solution is implemented for a particular deployment strategy and test runs are conducted. It is found that when number of attack nodes increased to 25, compared to ECC–Homomorphism and CCDE_GKM for the proposed trust-based distributed group key management technique there is an improvement in performance parameters such as throughput is dropped to only 10.11 Kbps, average delay is just 3.4 s, energy consumption is maximum 29 joules, packet loss is only 12.3 per cent, 90.9 per cent truly can detect attack, only 8.9 per cent false attack detection and 84 per cent true negative detection.

Medical care can be provided to human beings with much ease and flexibility via remote monitoring. The user can be at any place, can do his/her everyday work while remotely being monitored of their health parameters and secured transmission of their data to the health-care center for medical service in need.

This paper presents an optimized security solution for MWBAN using trust-based distributed group key management technique where bilinear pairing theory is used as major cryptographic base. Optimal key is selected based on trust value and also attack nodes are detected based on trust value to control participation in communication.

The purpose of this paper is energy consumption and security. To extend the sensor’s life span, saving the energy in a sensor is important. In this paper, biosensors are implanted or suited on the human body, and then, transposition has been applied for biosensors for reducing the sensor distance from the sink node. After transposition path loss has been calculated, security is maintained and also compared the results with the existing strategies.

Nowadays, one of the most emergent technologies is wireless body area network (WBAN), which represents to improve the quality of life and also allow for monitoring the remote patient and other health-care applications. Traffic routing plays a main role together with the relay nodes, which is used to collect the biosensor’s information and send it towards the sink.

To calculate the distance and observe the position, Euclidean distance technique is used. Path loss is the main parameter, which is needed to reduce for making better data transmission and to make the network stability. Routing protocols can be designed, with the help of proposed values of sensors locations in the human body, which gives good stability of network and lifetime. It helps to achieve as the less deplete energy.

This scheme is compared with the two existing schemes and shows the result in terms of parameter path loss. Moreover, this paper evaluated a new method for improving the security in WBAN. The main goal of this research is to find the optimal sensor location on the body and select the biosensor positions where they can get less energy while transmitting the data to the sink node, increasing the life span in biosensors, decreasing memory space, giving security, controlling the packet complexity and buffer overflow and also fixing the damages in the existing system.

The purpose of this paper is to ensure the anonymity and security of health data and improve the integrity and authenticity among patients, doctors and insurance providers. Simulation and validation algorithms are proposed in this work to ensure the proper implementation of the distributed system to secure and manage healthcare data. The author also aims to examine the methodology of Wireless Body Area Networks and how it contributes to the health monitoring system.

Wireless Body Area Network (WBAN) plays an important role in patient health data monitoring. In this paper, a novel framework is designed and proposed to generate data by the sensor machines and be stored in the cloud, and the transactions can be secured by blockchain. DNA cryptography is used in the framework to encrypt the hashes of the blocks. The proposed framework will ensure the anonymity and security of the health data and improve the integrity and authenticity among the patients, doctors and insurance providers.

Cloud Computing and Distributed Networking have transformed the IT industry and their amalgamation with intelligent systems would revolutionize the Healthcare Industry. The data being generated by devices is huge and storing it in the cloud environment would be a better decision. However, the privacy and security of healthcare data are still a concern because medical data is very confidential and desires to be safe and secure. The blockchain is a promising distributed network that ensures the security aspect of the data and makes the transactions authentic and transparent. In this work, the data is collected using various sensor devices and is transmitted to the cloud through the WBAN via the blockchain network.

In this paper, a framework for securing and managing the healthcare data generated by intelligent systems is proposed. As the data generated by these devices are heterogeneous and huge in nature, the cloud environment is chosen for its storage and analysis. Therefore, the transactions to and from the cloud are secured by using the blockchain-based distributed network.

The target end-users of our system are the patients to keep themselves informed and healthy, healthcare providers to monitor the conditions of their patients virtually, and the health insurance providers to have a track of the history of the patients, so that no fraudulent claims can be made.

The target end-users of our system are the patients for keeping themselves informed and healthy, healthcare providers for monitoring the conditions of their patients virtually and the health insurance providers to have a track of the history of the patients, so that no fraudulent claims can be made.

Smart ubiquitous sensors have been deployed in wireless body area networks to improve digital health-care services. As the requirement for computing power has drastically increased in recent years, the design of low power static RAM-based ubiquitous sensors is highly required for wireless body area networks. However, SRAM cells are increasingly susceptible to soft errors due to short supply voltage. The main purpose of this paper is to design a low power SRAM- based ubiquitous sensor for healthcare applications.

In this work, bias temperature instabilities are identified as significant issues in SRAM design. A level shifter circuit is proposed to get rid of soft errors and bias temperature instability problems.

Bias Temperature Instabilities are focused on in recent SRAM design for minimizing degradation. When compared to the existing SRAM design, the proposed FinFET-based SRAM obtains better results in terms of latency, power and static noise margin. Body area networks in biomedical applications demand low power ubiquitous sensors to improve battery life. The proposed low power SRAM-based ubiquitous sensors are found to be suitable for portable health-care devices.

In wireless body area networks, the design of low power SRAM-based ubiquitous sensors are highly essential. This design is power efficient and it overcomes the effect of bias temperature instability.