Search results

The Kirkendall void had been a well-known issue for long-term reliability of semiconductor interconnects; while even the KVs exist at the interfaces of Cu and Sn, it may still be able to pass the condition of unbias long-term reliability testing, especially for 2,000 cycles of temperature cycling test and 2,000 h of high temperature storage. A large number of KVs were observed after 200 cycles of temperature cycling test at the intermetallic Cu₃Sn layer which locate between the intermetallic Cu₆Sn₅ and Cu layers. These kinds of voids will grow proportional with the aging time at the initial stage. This paper aims to compare various IMC thickness as a function of stress test, the Cu₃Sn and Cu₆Sn₅ do affected seriously by heat, but Ni₃Sn₄ is not affected by heat or moisture.

The package is the design in the flip chip-chip scale package with bumping process and assembly. The package was put in reliability stress test that followed AEC-Q100 automotive criteria and recorded the IMC growing morphology.

The Cu₆Sn₅ intermetallic compound is the most sensitive to continuous heat which grows from 3 to 10 µm at high temperature storage 2,000 h testing, and the second is Cu₃Sn IMC. Cu₆Sn₅ IMC will convert to Cu₃Sn IMC at initial stage, and then Kirkendall void will be found at the interface of Cu and Cu₃Sn IMC, which has quality concerning issue if the void’s density grows up. The first phase to form and grow into observable thickness for Ni and lead-free interface is Ni₃Sn₄ IMC, and the thickness has little relationship to the environmental stress, as no IMC thickness variation between TCT, uHAST and HTSL stress test. The more the Sn exists, the thicker Ni₃Sn₄ IMC will be derived from this experimental finding compare the Cu/Ni/SnAg cell and Ni/SnAg cell.

The research found that FCCSP can pass automotive criteria that follow AEC-Q100, which give the confidence for upgrading the package type with higher efficiency and complexities of the pin design.

This result will impact to the future automotive package, how to choose the best package methodology and what is the way to do the package. The authors can understand the tolerance for the kind of flip chip package, and the bump structure is then applied for high-end technology.

The overall three kinds of bump structures, Cu/Ni/SnAg, Cu/SnAg and Ni/SnAg, were taken into consideration, and the IMC growing morphology had been recorded. Also, the IMC had changed during the environmental stress, and KV formation was reserved.

The purpose of this paper is to present the result of calculations that were performed to estimate the structural weight of the passenger aircraft using novel technological solution. Mass penalty resulting from the installation of the fuselage boundary layer ingestion device was needed in the CENTRELINE project to be able to estimate the real benefits of the applied technology.

This paper focusses on the finite element analysis (FEA) of the fuselage and wing primary load-carrying structures. Masses obtained in these analyses were used as an input for the total structural mass calculation based on semi-empirical equations.

Combining FEA with semi-empirical equations makes it possible to estimate the mass of structures at an early technology readiness level and gives the possibility of obtaining more accurate results than those obtained using only empirical formulas. The applied methodology allows estimating the mass in case of using unusual structural solutions, which are not covered by formulas available in the literature.

Accurate structural mass estimation is possible at an earlier design stage of the project based on the presented methodology, which allows for easier and less costly changes in designed aircrafts.

The presented methodology is an original method of mass estimation based on a two-track approach. The analytical formulas available in the literature have worked well for aeroplanes of conventional design, but thanks to the connection with FEA presented in this paper, it is possible to estimate the structure mass of aeroplanes using unconventional technological solutions.

Leadership, organizational, and institutional theories provide competing explanations on the nature of leadership and role of leaders. Part of the problem is that each theory is often studied in isolation, leading to incomplete perspectives on the essence of leadership in value- driven contexts. A holistic paradigm that blends the three dominant models for understanding the work of the collective is warranted and necessary to optimize organizational outcomes. This article briefly highlights the contributions and limitations of each frame and provides an overview of complexity theory as a model for reconciling major differences. The paper provides specific perspectives, practices, and metaphors for navigating the collective to bring about desired outcomes.

This study aims to show a case study of ecosystem-based adaptation (EbA) measures to increase coastal system’s resilience to extreme weather events and sea-level rise (SLR) implemented at Kiyú (Uruguayan coast of the Rio de la Plata river estuary).

A participatory process involving the community and institutional stakeholders was carried out to select and prioritise adaptation measures to reduce the erosion of sandy beaches, dunes and bluffs due to extreme wind storm surge and rainfall, SLR and mismanagement practices. The recovery of coastal ecosystems was implemented through soft measures (green infrastructure) such as revegetation with native species, dune regeneration, sustainable drainage systems and the reduction of use pressures.

Main achievements of this case study include capacity building of municipal staff and stakeholders, knowledge exchanges with national-level decision makers and scientists and the incorporation of EbA approaches by subnational-level coastal governments. To consolidate EbA, the local government introduced innovations in the coastal management institutional structure.

The outcomes of the article include, besides the increase in the resilience of social-ecological systems, the strengthening of socio-institutional behaviour, structure and sustainability. This experience provides insights for developing a strategy for both Integrated Coastal Management and climate adaptation at the national scale.