Search results
1 – 9 of 9María Carmona, Rafael Casado González, Aurelio Bermúdez, Miguel Pérez-Francisco, Pablo Boronat and Carlos Calafate
In the aerial transportation area, fuel costs are critical to the economic viability of companies, and so urgent measures should be adopted to avoid any unnecessary increase in…
Abstract
Purpose
In the aerial transportation area, fuel costs are critical to the economic viability of companies, and so urgent measures should be adopted to avoid any unnecessary increase in operational costs. In particular, this paper addresses the case of missed approach manouevres, showing that it is still possible to optimize the usual procedure.
Design/methodology/approach
The costs involved in a standard procedure following a missed approach are analysed through a simulation model, and they are compared with the improvements achieved with a fast reinjection scheme proposed in a prior work.
Findings
Experimental results show that, for a standard A320 aircraft, fuel savings ranging from 55% to 90% can be achieved through the reinjection method.
Originality/value
To the best of the authors’ knowledge, this work is the first study in the literature addressing the fuel savings benefits obtained by applying a reinjection technique for missed approach manoeuvres.
Details
Keywords
Yaxing Ren, Ren Li, Xiaoying Ru and Youquan Niu
This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller…
Abstract
Purpose
This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.
Design/methodology/approach
A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.
Findings
The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.
Originality/value
The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.
Details
Keywords
This study aims to introduce the design and the design process for an innovative sanitary fixture to be used in public facilities for the purpose of ablution. This purpose-made…
Abstract
Purpose
This study aims to introduce the design and the design process for an innovative sanitary fixture to be used in public facilities for the purpose of ablution. This purpose-made fixture is needed to support the hygienic, safe and comfortable performance of this essential function in public facilities in many parts of the world. The study also clarifies the need for this function and critically reviews current designs to address it.
Design/methodology/approach
The study started by critically reviewing the standard built-in models for ablution. It also identified and analyzed new approaches to designing standalone ablution fixtures. The study then specified the characteristics of a better ablution fixture and involved drafting a design based on these characteristics, making a wooden prototype to test the design and receiving users’ feedback. The design was adjusted and tested again for more feedback. Finally, the study resulted in the development of a final design. It used digital fabrication to create the design prototype with improved aesthetics, tested it again and received user feedback.
Findings
A survey of users showed that they found the innovative fixture more comfortable and safer than the commonly used built-in models. The main concern was the potential for water to splash on clothes from the high faucet.
Originality/value
In addition to showing an innovative design for a purpose-made sanitary fixture for ablution, the study makes the reader aware of the various challenges of providing a hygienic, safe and comfortable facility for users to perform this function. This is very useful for the many designers and facility managers who deal with the issue.
Details
Keywords
The main aim of this article is to broaden the notion of strategic intent in public relations. It also develops an understanding of the social value of what can be defined as the…
Abstract
Purpose
The main aim of this article is to broaden the notion of strategic intent in public relations. It also develops an understanding of the social value of what can be defined as the first modern health communication campaign in Europe based on strategic intents and the development of modernity.
Design/methodology/approach
The study is based on both historical research and empirical material from the Norwegian tuberculosis campaign from 1889 up to 1913, when Norwegian women achieved suffrage. The campaign is analysed in the framework of modernity and social theory. The literature on lobbying and social movements is also used to develop a theoretical framework for the notion of strategic intent.
Findings
The study shows that strategic intent can be divided into two layers: (1) the implicit strategic intent is the real purpose behind the communication efforts, whereas (2) the explicit intent is found directly in the communication efforts. The explicit intent may be presented as a solution for the good of society at the right political moment, giving an organisation the possibility to mobilise for long-term social changes, in which could be the implicit intent.
Originality/value
The distinction between explicit and implicit strategic intent broadens our understanding on how to make long-term social changes as well as how social and political changes occur in modern societies. The article also gives a historical account of what is here defined as the first modern health communication campaign in Europe and its social value.
Details
Keywords
Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…
Abstract
Purpose
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.
Design/methodology/approach
Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.
Findings
In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.
Originality/value
With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.
Details
Keywords
Oliver Disney, Mattias Roupé, Mikael Johansson and Alessio Domenico Leto
Building information modeling (BIM) is mostly limited to the design phase where two parallel processes exist, i.e. creating 2D-drawings and BIM. Towards the end of the design…
Abstract
Purpose
Building information modeling (BIM) is mostly limited to the design phase where two parallel processes exist, i.e. creating 2D-drawings and BIM. Towards the end of the design process, BIM becomes obsolete as focus shifts to producing static 2D-drawings, which leads to a lack of trust in BIM. In Scandinavia, a concept known as Total BIM has emerged, which is a novel “all-in” approach where BIM is the single source of information throughout the project. This paper's purpose is to investigate the overall concept and holistic approach of a Total BIM project to support implementation and strategy work connected to BIM.
Design/methodology/approach
Qualitative data were collected through eight semi-structured interviews with digitalization leaders from the case study project. Findings were analyzed using a holistic framework to BIM implementation.
Findings
The Total BIM concept was contingent on the strong interdependences between commonly found isolated BIM uses. Four main success factors were identified, production-oriented BIM as the main contractual and legally binding construction document, cloud-based model management, user-friendly on-site mobile BIM software and strong leadership.
Originality/value
A unique case is studied where BIM is used throughout all project phases as a single source of information and communication platform. No 2D paper drawings were used on-site and the Total BIM case study highlights the importance of a new digitalized construction process.
Details
Keywords
Bonnie Poksinska and Malin Wiger
Providing high-quality and cost-efficient care of older people is an important development priority for many health and social care systems in the world. This paper suggests a…
Abstract
Purpose
Providing high-quality and cost-efficient care of older people is an important development priority for many health and social care systems in the world. This paper suggests a shift from acute, episodic and reactive hospital-centered care toward longitudinal, person-centered and proactive home-centered care. The purpose of this paper is to contribute to the knowledge of a comprehensive development strategy for designing and providing home-centered care of older people.
Design/methodology/approach
The study design is based on qualitative research with an inductive approach. The authors study development initiatives at the national, regional and local levels of the Swedish health and social care system. The data collection methods included interviews (n = 54), meeting observations (n = 25) and document studies (n = 59).
Findings
The authors describe findings related to policy actions and system changes, attempts to achieve collaboration, integration and coordination, new forms of care offerings, characteristics of work settings at home and differences in patients' roles and participation at home and in the hospital.
Practical implications
The authors suggest home-centered care as a solution for providing person-centered and integrated care of older people and give examples of how this can be achieved.
Originality/value
The authors outline five propositions for research and development related to national policies, service modularity as a solution for customized and coordinated care, developing human resources and infrastructure for home settings, expanding services that enable older people living at home and patient co-creation.
Details
Keywords
Katarzyna Piwowar-Sulej, Ewa Popowicz and Adam Sulich
The article explores the linkages between the type of environmental strategy (ES), the use of internal communication (IC), and the greening of organizational culture (OC)…
Abstract
Purpose
The article explores the linkages between the type of environmental strategy (ES), the use of internal communication (IC), and the greening of organizational culture (OC). Moreover, the article empirically examines whether company size matters in the use of environmental IC practices in the green context. Additionally, the article considers differences between people employed at different organizational hierarchy levels. The basis for such a comparison is their opinions about the effectiveness of communication practices.
Design/methodology/approach
Empirical research employed a survey method done on 199 organizations in 2020. Statistical analyses used the chi-squared test, Kendall’s Tau-b correlation coefficient, and the Mann–Whitney U test.
Findings
The research showed that companies with a proactive green strategy more often use different communication practices related to ES and have a greener culture. The study proved that larger companies more often use the analyzed communication practices. However, we found no significant difference in opinion between middle managers and line employees about the effectiveness of these practices.
Practical implications
The main contribution to business practice is the exploratory model based on the empirical study, which allows organizations to successfully implement the ES.
Originality/value
Studies rarely combine the three organizational elements: IC, OC, and ES. This article provides new empirical evidence on relationships between features of OC, green strategy types, and communication practices.
Details
Keywords
Ivan Soukal, Jan Mačí, Gabriela Trnková, Libuse Svobodova, Martina Hedvičáková, Eva Hamplova, Petra Maresova and Frank Lefley
The primary purpose of this paper is to identify the so-called core authors and their publications according to pre-defined criteria and thereby direct the users to the fastest…
Abstract
Purpose
The primary purpose of this paper is to identify the so-called core authors and their publications according to pre-defined criteria and thereby direct the users to the fastest and easiest way to get a picture of the otherwise pervasive field of bankruptcy prediction models. The authors aim to present state-of-the-art bankruptcy prediction models assembled by the field's core authors and critically examine the approaches and methods adopted.
Design/methodology/approach
The authors conducted a literature search in November 2022 through scientific databases Scopus, ScienceDirect and the Web of Science, focussing on a publication period from 2010 to 2022. The database search query was formulated as “Bankruptcy Prediction” and “Model or Tool”. However, the authors intentionally did not specify any model or tool to make the search non-discriminatory. The authors reviewed over 7,300 articles.
Findings
This paper has addressed the research questions: (1) What are the most important publications of the core authors in terms of the target country, size of the sample, sector of the economy and specialization in SME? (2) What are the most used methods for deriving or adjusting models appearing in the articles of the core authors? (3) To what extent do the core authors include accounting-based variables, non-financial or macroeconomic indicators, in their prediction models? Despite the advantages of new-age methods, based on the information in the articles analyzed, it can be deduced that conventional methods will continue to be beneficial, mainly due to the higher degree of ease of use and the transferability of the derived model.
Research limitations/implications
The authors identify several gaps in the literature which this research does not address but could be the focus of future research.
Practical implications
The authors provide practitioners and academics with an extract from a wide range of studies, available in scientific databases, on bankruptcy prediction models or tools, resulting in a large number of records being reviewed. This research will interest shareholders, corporations, and financial institutions interested in models of financial distress prediction or bankruptcy prediction to help identify troubled firms in the early stages of distress.
Social implications
Bankruptcy is a major concern for society in general, especially in today's economic environment. Therefore, being able to predict possible business failure at an early stage will give an organization time to address the issue and maybe avoid bankruptcy.
Originality/value
To the authors' knowledge, this is the first paper to identify the core authors in the bankruptcy prediction model and methods field. The primary value of the study is the current overview and analysis of the theoretical and practical development of knowledge in this field in the form of the construction of new models using classical or new-age methods. Also, the paper adds value by critically examining existing models and their modifications, including a discussion of the benefits of non-accounting variables usage.
Details