Search results
1 – 10 of 87Michael Nierla, Michael Loeffler, Manfred Kaltenbacher and Stefan Johann Rupitsch
The numerical computation of magnetization processes in moving and rotating assemblies requires the usage of vector hysteresis models. A commonly used model is the so-called…
Abstract
Purpose
The numerical computation of magnetization processes in moving and rotating assemblies requires the usage of vector hysteresis models. A commonly used model is the so-called Mayergoyz vector Preisach model, which applies the scalar Preisach model into multiple angles of the halfspace. The usage of several scalar models, which are optionally weighted differently, enables the description of isotropic as well as anisotropic materials. The flexibility is achieved, however, at the cost of multiple scalar model evaluations. For solely isotropic materials, two vector Preisach models, based on an extra rotational operator, might offer a lightweight alternative in terms of evaluation cost. The study aims at comparing the three mentioned models with respect to computational efficiency and practical applicability.
Design/methodology/approach
The three mentioned vector Preisach models are compared with respect to their computational costs and their representation of magnetic polarization curves measured by a vector vibrating sample magnetometer.
Findings
The results prove the applicability of all three models to practical scenarios and show the higher efficiency of the vector models based on rotational operators in terms of computational time.
Originality/value
Although the two vector Preisach models, based on an extra rotational operator, have been proposed in 2012 and 2015, their practical application and inversion has not been tested yet. This paper not only shows the usability of these particular vector Preisach models but also proves the efficiency of a special stageless evaluation approach that was proposed in a former contribution.
Details
Keywords
Michael Nierla, Manfred Kaltenbacher and Stefan Johann Rupitsch
A major purpose of vector hysteresis models lies in the prediction of power losses under rotating magnetic fields. The well-known vector Preisach model by Mayergoyz has been shown…
Abstract
Purpose
A major purpose of vector hysteresis models lies in the prediction of power losses under rotating magnetic fields. The well-known vector Preisach model by Mayergoyz has been shown to well predict such power losses at low amplitudes of the applied field. However, in its original form, it fails to predict the reduction of rotational power losses at high fields. In recent years, two variants of a novel vector Preisach model based on rotational operators have been published and investigated with respect to general accuracy and performance. This paper aims to examine the capabilities of the named vector Preisach models in terms of rotational hysteresis loss calculations.
Design/methodology/approach
In a first step, both variants of the novel rotational operator-based vector Preisach model are tested with respect to their overall capability to prescribe rotational hysteresis losses. Hereby, the direct influence of the model-specific parameters onto the computable losses is investigated. Afterward, it is researched whether there exists an optimized set of parameters for these models that allows the matching of measured rotational hysteresis losses.
Findings
The theoretical investigations on the influence of the model-specific parameters onto the computable rotational hysteresis losses showed that such losses can be predicted in general and that a variation of these parameters allows to adapt the simulated loss curves in both shape and amplitude. Furthermore, an optimized parameter set for the prediction of the named losses could be retrieved by direct matching of simulated and measured loss curves.
Originality/value
Even though the practical applicability and the efficiency of the novel vector Preisach model based on rotational operators has been proven in previous publications, its capabilities to predict rotational hysteresis losses has not been researched so far. This publication does not only show the general possibility to compute such losses with help of the named vector Preisach models but also in addition provides a routine to derive an optimized parameter set, which allows an accurate modeling of actually measured loss curves.
Details
Keywords
Michael Nierla, Alexander Sutor, Stefan Johann Rupitsch and Manfred Kaltenbacher
This paper aims to present a novel stageless evaluation scheme for a vector Preisach model that exploits rotational operators for the description of vector hysteresis. It is meant…
Abstract
Purpose
This paper aims to present a novel stageless evaluation scheme for a vector Preisach model that exploits rotational operators for the description of vector hysteresis. It is meant to resolve the discretizational errors that arise during the application of the standard matrix-based implementation of Preisach-based models.
Design/methodology/approach
The newly developed evaluation uses a nested-list data structure. Together with an adapted form of the Everett function, it allows to represent both the additional rotational operator and the switching operator of the standard scalar Preisach model in a stageless fashion, i.e. without introducing discretization errors. Additionally, presented updating and simplification rules ensure the computational efficiency of the scheme.
Findings
A comparison between the stageless evaluation scheme and the commonly used matrix approach reveals not only an improvement in accuracy up to machine precision but, furthermore, a reduction of computational resources.
Research limitations/implications
The presented evaluation scheme is especially designed for a vector Preisach model, which is based on an additional rotational operator. A direct application to other vector Preisach models that do not rely on rotational operators is not intended. Nevertheless, the presented methodology allows an easy adaption to similar vector Preisach schemes that use modified setting rules for the rotational operator and/or the switching operator.
Originality/value
Prior to this contribution, the vector Preisach model based on rotational operators could only be evaluated using a matrix-based approach that works with discretized forms of rotational and switching operator. The presented evaluation scheme offers reduced computational cost at much higher accuracy. Therefore, it is of great interest for all users of the mentioned or similar vector Preisach models.
Details
Keywords
Carlo Ragusa and Maurizio Repetto
The implementation of a vector Preisach model for the modelling of anisotropic hysteretic soft magnetic materials is outlined. Some comparisons with measurements on alternate and…
Abstract
The implementation of a vector Preisach model for the modelling of anisotropic hysteretic soft magnetic materials is outlined. Some comparisons with measurements on alternate and rotational magnetic field excitations are shown. The hysteresis model is inserted inside a two‐dimensional finite element solver formulated in terms of magnetic vector potential and nonlinear solution is handled by means of the fixed point method with H‐scheme. Results obtained on a two‐dimensional geometry are described and discussed.
Details
Keywords
The purpose of this paper is to present a Preisach model to simulate the vector hysteresis properties of ferromagnetic materials.
Abstract
Purpose
The purpose of this paper is to present a Preisach model to simulate the vector hysteresis properties of ferromagnetic materials.
Design/methodology/approach
The vector behavior has been studied at low frequency applying a single‐sheet tester with a round‐shaped specimen, and the locus of the magnetic flux density vector has been controlled by a digital measurement system. An inverse vector Preisach hysteresis model has been developed and identified by using the measured data.
Findings
Finally, the inverse model has been inserted into a finite element procedure through the combination of the fixed point technique and the reduced magnetic scalar potential formulation. The developed single‐sheet tester measurement system has been simulated. The applicability of the realized measurement system as well as the developed model has been proven by comparing measured and simulated results.
Originality/value
The identification technique is original, based on a previous work of the author.
Details
Keywords
Edward Della Torre and Ermanno Cardelli
This paper aims to discuss the problems associated with using a new vector hysteresis model.
Abstract
Purpose
This paper aims to discuss the problems associated with using a new vector hysteresis model.
Design/methodology/approach
The implementation of this new model is independent of the coordinate system used, thus is more tractable mathematically. It is simpler to use than other models. It has the correct energy properties.
Findings
The model requires fewer variables to describe anisotropic media.
Research limitations/implications
The simplicity of the coordinated vector hysteresis model is only valid for ellipsoidally magnetizable media.
Practical implications
The design of vector hysteresis devices will be far more accurate using this model.
Originality/value
The elaboration of this model has not been presented before.
Abstract
Purpose
The purpose of this paper is to present a procedure, which determines the magnetic force acting between a soft magnetic cylinder and a coil taking the hysteresis phenomena into account.
Design/methodology/approach
The magnetic force is computed replacing the ferromagnetic body with an equivalent magnetic moment distribution. Isotropic vector Preisach model with analytical expressed Everett function describes the magnetic properties of the ferromagnetic material. The magnetization distribution is calculated applying the integral equation method. The Preisach hysteresis model is included in the iteration process based on Picard‐Banach scheme.
Findings
In the case of integral equation method the unknown quantities are the magnetization and the magnetic field intensity. In this way the Preisach hysteresis model can be included in a convenient way in the iteration procedure. Knowing the magnetization distribution the magnetic force can be determined. The developed algorithms can be applied in tubular linear motor design.
Originality/value
The paper presents a new formulation of the Preisach hysteresis model. With the aim of the analytically expressed Everett function a stable and faster algorithm can be realized to determine the magnetic force in arrangements with ferromagnetic parts.
Details
Keywords
The purpose of this paper is to develop a viscous-type frequency dependent scalar Preisach hysteresis model and to identify the model using measured data and nonlinear numerical…
Abstract
Purpose
The purpose of this paper is to develop a viscous-type frequency dependent scalar Preisach hysteresis model and to identify the model using measured data and nonlinear numerical field analysis. The hysteresis model must be fast and well applicable in electromagnetic field simulations.
Design/methodology/approach
Iron parts of electrical machines are made of non-oriented isotropic ferromagnetic materials. The finite element method (FEM) is usually applied in the numerical field analysis and design of this equipment. The scalar Preisach hysteresis model has been implemented for the simulation of static and dynamic magnetic effects inside the ferromagnetic parts of different electrical equipment.
Findings
The comparison between measured and simulated data using a toroidal core shows a good agreement. A modified nonlinear version of TEAM Problem No. 30.a is also shown to test the hysteresis model in the FEM procedure.
Originality/value
The dynamic model is an extension of the static one; an extra magnetic field intensity term is added to the output of the static inverse model. This is a viscosity-type dynamic model. The fixed-point method with stable scheme has been realized to take frequency dependent anomalous losses into account in FEM. This scheme can be used efficiently in the frame of any potential formulations of Maxwell's equations.
Details
Keywords
Valentin Hanser, Markus Schöbinger and Karl Hollaus
This work introduces an efficient and accurate technique to solve the eddy current problem in laminated iron cores considering vector hysteresis.
Abstract
Purpose
This work introduces an efficient and accurate technique to solve the eddy current problem in laminated iron cores considering vector hysteresis.
Design/methodology/approach
The mixed multiscale finite element method based on the based on the T,Φ-Φ formulation, with the current vector potential T and the magnetic scalar potential Φ allows the laminated core to be modelled as a single homogeneous block. This means that the individual sheets do not have to be resolved, which saves a lot of computing time and reduces the demands on the computer system enormously.
Findings
As a representative numerical example, a single-phase transformer with 4, 20 and 184 sheets is simulated with great success. The eddy current losses of the simulation using the standard finite element method and the simulation using the mixed multiscale finite element method agree very well and the required simulation time is tremendously reduced.
Originality/value
The vector Preisach model is used to account for vector hysteresis and is integrated into the mixed multiscale finite element method for the first time.
Details
Keywords
In a model resulting from Maxwell's equations with a constitutive law using Preisach operators for incorporating magnetization hysteresis, this paper aims at identifying the…
Abstract
Purpose
In a model resulting from Maxwell's equations with a constitutive law using Preisach operators for incorporating magnetization hysteresis, this paper aims at identifying the hysteresis operator, i.e. the Preisach weight function, from indirect measurements.
Design/methodology/approach
Dealing with a nonlinear inverse problem, one has to apply iterative methods for its numerical solution. For this purpose several approaches are proposed based on fixed point or Newton type ideas. In the latter case, one has to take into account nondifferentiability of the hysteresis operator. This is done by using differentiable substitutes or quasi‐Newton methods.
Findings
Numerical tests with synthetic data show that fixed point methods based on fitting after a full forward sweep (alternating iteration) and Newton type iterations using the hysteresis centerline or commutation curve exhibit a satisfactory convergence behavior, while fixed point iterations based on subdividing the time interval (Kaczmarz) suffer from instability problems and quasi Newton iterations (Broyden) are too slow in some cases.
Research limitations/implications
Application of the proposed methods to measured data will be the subject of future research work.
Practical implications
The proposed methodologies allow to determine material parameters in hysteresis models from indirect measurements.
Originality/value
Taking into account the full PDE model, one can expect to get accurate and reliable results in this model identification problem. Especially the use of Newton type methods – taking into account nondifferentiability – is new in this context.
Details