To read this content please select one of the options below:

Identification of the 2D vector Preisach hysteresis model

Miklós Kuczmann (Laboratory of Electromagnetic Fields, Department of Telecommunications, Széchenyi István University, Győr, Hungary)

Abstract

Purpose

The purpose of this paper is to present a Preisach model to simulate the vector hysteresis properties of ferromagnetic materials.

Design/methodology/approach

The vector behavior has been studied at low frequency applying a single‐sheet tester with a round‐shaped specimen, and the locus of the magnetic flux density vector has been controlled by a digital measurement system. An inverse vector Preisach hysteresis model has been developed and identified by using the measured data.

Findings

Finally, the inverse model has been inserted into a finite element procedure through the combination of the fixed point technique and the reduced magnetic scalar potential formulation. The developed single‐sheet tester measurement system has been simulated. The applicability of the realized measurement system as well as the developed model has been proven by comparing measured and simulated results.

Originality/value

The identification technique is original, based on a previous work of the author.

Keywords

Citation

Kuczmann, M. (2011), "Identification of the 2D vector Preisach hysteresis model", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 30 No. 2, pp. 538-551. https://doi.org/10.1108/03321641111101069

Publisher

:

Emerald Group Publishing Limited

Copyright © 2011, Emerald Group Publishing Limited

Related articles