Search results

Recent interest in electric aircraft has opened avenues for exploring innovative concepts and designs. Because of its potential to increase wing aerodynamic efficiency, the idea of wing tip-mounted propellers is becoming more popular in the context of electric aircraft. This paper aims to address the question of which configuration, tractor or pusher at wing tip is more beneficial.

The interactions between the wing and tip-mounted propellers in tractor and pusher configurations have been studied computationally. In this study, the propeller is modeled as a disk, and the blade element method (BEM) coupled with the computational fluid dynamics (CFD)–Reynolds-averaged Navier–Stokes (RANS) solver is used to calculate propeller blade loading recursively. A direct comparison between the wing with tip-mounted propellers in tractor and pusher configurations is made by varying the direction of rotation and thrust.

Wing with tip-mounted propellers having inboard-up rotation is found to offer less drag in tractor and pusher configurations than those without propeller cases. Wing tip-mounted propeller in tractor configuration with inboard-up rotation offers higher wing aerodynamic efficiency than the other configurations. In tractor and pusher configurations with inboard-up rotating propellers, wing tip vortex attenuation is seen, whereas with outboard-up rotating propellers, the wing tip vortex amplification is observed.

SU2, an open-source CFD tool, is used in this study and BEM is coupled to perform RANS–BEM simulations. Both qualitative and quantitative comparisons were made between the tractor and pusher configurations, which may find its value when a question arises about the aerodynamically best propeller configuration at wing tips.

The purpose of this paper is to give a comparison between different type of baffles for a better application. Computational analysis of heat transfer and fluid flow through plain, flower and perforated baffles for heat exchanger.

Numerical simulations for heat exchangers with plain, flower and perforated baffles are carried out with finite volume method. The thermal-hydraulic performance for the three types is presented in the same conditions.

The perforated baffles generate low shell pressure with high Nusselt number; transverse baffles give the best heat transfer with high pumping power. The overall performance coefficient of these three types of heat exchangers shows that the perforated baffles have a highest and the transverse baffles have the lowest. Analysis of the results show that perforated transverse baffles produce pressure drop lower by 6.68% than transverse baffles and 2.64% lower than flower baffles. The pumping power for perforated transverse baffles lower by 13.3% to the transverse baffles and 4.72% lower than that of flower baffles. The Nusselt number for perforated baffles higher by 4.16% to the flower baffles and 2.77% with transverse baffles. The overall performance factor in the heat exchanger with perforated baffles higher by 5.55% to that with transverse baffles and 3.46% with flower baffles. Recirculation areas are reduced in shell with perforated baffles and velocity distribution becomes more uniform.

Using of perforated baffles in heat exchanger give the best overall performance factor.

This study aims to assess the robustness and accuracy of the face-centred finite volume (FCFV) method for the simulation of compressible laminar flows in different regimes, using numerical benchmarks.

The work presents a detailed comparison with reference solutions published in the literature –when available– and numerical results computed using a commercial cell-centred finite volume software.

The FCFV scheme provides first-order accurate approximations of the viscous stress tensor and the heat flux, insensitively to cell distortion or stretching. The strategy demonstrates its efficiency in inviscid and viscous flows, for a wide range of Mach numbers, also in the incompressible limit. In purely inviscid flows, non-oscillatory approximations are obtained in the presence of shock waves. In the incompressible limit, accurate solutions are computed without pressure correction algorithms. The method shows its superior performance for viscous high Mach number flows, achieving physically admissible solutions without carbuncle effect and predictions of quantities of interest with errors below 5%.

The FCFV method accurately evaluates, for a wide range of compressible laminar flows, quantities of engineering interest, such as drag, lift and heat transfer coefficients, on unstructured meshes featuring distorted and highly stretched cells, with an aspect ratio up to ten thousand. The method is suitable to simulate industrial flows on complex geometries, relaxing the requirements on mesh quality introduced by existing finite volume solvers and alleviating the need for time-consuming manual procedures for mesh generation to be performed by specialised technicians.

This paper aims to discuss the electromagnetic scattering characteristics of the afterbody model with two drag plates.

The plane shape of the drag plate model is designed as a rectangle. High-precision unstructured grid technology is used to treat the target surface. A calculation method based on multiple tracking and dynamic scattering module is presented to calculate the radar cross section (RCS).

The results show that under the given observation conditions, the RCS and surface scattering characteristics of a single drag plate change with the increase of the opening angle, which makes the forward RCS of the afterbody model change more than 8.43 dBm2. The opening of two resistance plates at different fixed angles has little effect on the peak value and position of the RCS of the afterbody model. The dynamic deflection of the two drag plates can bring 16.78 dBm2 fluctuations to the forward RCS of the afterbody model, and more than 25.59 dBm2 fluctuations to the side RCS.

The installation positions of the drag plate on the aircraft are various, so the method in this paper can provide reference and support for RCS analysis of the speed brake at other positions.

The presented calculation method is of engineering value to analyze the electromagnetic scattering characteristics of the drag plate.

This study aims to learn the dynamic radar cross-section (RCS) of a deflection air brake.

The aircraft model with delta wing, V-shaped tail and blended wing body is designed, and high-precision unstructured grid technology is used to deal with the surface of air brake and fuselage. The calculation method based on multiple tracking and dynamic scattering is presented to calculate RCS.

The fuselage has a low scattering level, and the opening air brake will bring obvious dynamic RCS effects to itself and the whole machine. The average indicator of air brake RCS can be lower than –0.6 dBm² under the tail azimuth, while that of forward and lateral direction is lower. The mean RCS of fuselage is obviously higher than that of air brake, while the deflected air brake and its cabin can still provide strong scattering sources at some azimuths. When the air brake is opening, the change amplitude of the aircraft forward RCS can exceed 19.81 dBm².

This research has practical significance for the dynamic electromagnetic scattering analysis and stealth design of the air brake.

The calculation method for aircraft RCS considering air brake dynamic deflection has been established.

This study aims to evaluate blast loads on and the response of submerged structures.

An arbitrary Lagrangian–Eulerian method is developed to model fluid–structure interaction (FSI) problems of close-in underwater explosions (UNDEX). The “fluid” part provides the loads for the structure considers air, water and high explosive materials. The spatial discretization for the fluid domain is performed with a second-order vertex-based finite volume scheme with a tangent of hyperbola interface capturing technique. The temporal discretization is based on explicit Runge–Kutta methods. The structure is described by a large-deformation Lagrangian formulation and discretized via finite elements. First, one-dimensional test cases are given to show that the numerical method is free of mesh movement effects. Thereafter, three-dimensional FSI problems of close-in UNDEX are studied. Finally, the computation of UNDEX near a ship compartment is performed.

The difference in the flow mechanisms between rigid targets and deforming targets is quantified and evaluated.

Cavitation is modeled only approximately and may require further refinement/modeling.

The results demonstrate that the proposed numerical method is accurate, robust and versatile for practical use.

Better design of naval infrastructure [such as bridges, ports, etc.].

To the best of the authors’ knowledge, this study has been conducted for the first time.

The ability to characterise highly conducting objects, that may also be highly magnetic, by the complex symmetric rank–2 magnetic polarizability tensor (MPT) is important for metal detection applications including discriminating between threat and non-threat objects in security screening, identifying unexploded anti-personnel landmines and ordnance and identifying metals of high commercial value in scrap sorting. Many everyday non-threat items have both a large electrical conductivity and a magnetic behaviour, which, for sufficiently weak fields and the frequencies of interest, can be modelled by a high relative magnetic permeability. This paper aims to discuss the aforementioned idea.

The numerical simulation of the MPT for everyday non-threat highly conducting magnetic objects over a broad range of frequencies is challenging due to the resulting thin skin depths. The authors address this by employing higher order edge finite element discretisations based on unstructured meshes of tetrahedral elements with the addition of thin layers of prismatic elements. Furthermore, computer aided design (CAD) geometrical models of the non-threat and threat object are often not available and, instead, the authors extract the geometrical features of an object from an imaging procedure.

The authors obtain accurate numerical MPT characterisations that are in close agreement with experimental measurements for realistic physical objects. The assessment of uncertainty shows the impact of geometrical and material parameter uncertainties on the computational results.

The authors present novel computations and measurements of MPT characterisations of realistic objects made of magnetic materials. A novel assessment of uncertainty in the numerical predictions of MPT characterisations for uncertain geometry and material parameters is included.

This paper aims to investigate the effect of partially blocking the cathode channel with the stair arrangement of obstacles on the performance of a proton exchange membrane fuel cell.

A numerical study is conducted by developing a three-dimensional computational fluid dynamics model.

As the angle of the stair arrangement increases, the performance of the fuel cell is reduced and the pressure drop is decreased. The use of four stair obstacles with an angle of 0.17° leads to higher power density and a lower pressure drop compared to the case with three rectangular obstacles of the same size and maximum height. The use of four stair obstacles with an angle of 0.34° results in higher power density and lower pressure drop compared to the case with two rectangular obstacles of the same size and maximum height.

Using the stair arrangement of obstacles as an innovation of the present work, in addition to improving the fuel cell’s performance, creates a lower pressure drop than the simple arrangement of obstacles.

This paper aims to develop a new method of fuselage drag optimization that can obtain results faster than the conventional methods based on full computational fluid dynamics (CFD) calculations and can be used to improve the efficiency of preliminary design.

An efficient method for helicopter fuselage shape optimization based on surrogate-based optimization is presented. Two numerical simulation methods are applied in different stages of optimization according to their relative advantages. The fast panel method is used to calculate the sample data to save calculation time for a large number of sample points. The initial solution is obtained by combining the Kriging surrogate model and the multi-island genetic algorithm. Then, the accuracy of the solution is determined by using the infill criteria based on CFD corrections. A parametric model of the fuselage is established by several characteristic sections and guiding curves.

It is demonstrated that this method can greatly reduce the calculation time while ensuring a high accuracy in the XH-59A helicopter example. The drag coefficient of the optimized fuselage is reduced by 13.3%. Because of the use of different calculation methods for samples, this novel method reduces the total calculation time by almost fourfold compared with full CFD calculations.

To the best of the authors’ knowledge, this is the first study to provide a novel method of fuselage drag optimization by combining different numerical simulation methods. Some suggestions on fuselage shape optimization are given for the XH-59A example.

The asymmetry of the velocity profile caused by geometric deformation, complex turbulent motion and other factors must be considered to effectively use the flowmeter on any section. This study aims to better capture the flow field information and establish a model to predict the profile velocity, we take the classical double elbow as the research object and propose to divide the flow field into three categories with certain common characteristics.

The deep learning method is used to establish the model of multipath linear velocity fitting profile average velocity. A total of 480 groups of data are taken for training and validation, with ten integer velocity flow fields from 1 m/s to 10 m/s. Finally, accuracy research with relative error as standard is carried out.

The numerical experiment yielded the following promising results: the maximum relative error is approximately 1%, and in the majority of cases, the relative error is significantly lower than 1%. These results demonstrate that it surpasses the classical optimization algorithm Equal Tab (5%) and the traditional artificial neural network (3%) in the same scenario. In contrast with the previous research on a fixed profile, we focus on all the velocity profiles of a certain length for the first time, which can expand the application scope of a multipath ultrasonic flowmeter and promote the research on flow measurement in any section.

This work proposes to divide the flow field of double elbow into three categories with certain common characteristics to better capture the flow field information and establish a model to predict the profile velocity.