Search results

This study aims to solve the problems of low flow rate and low efficiency of micropumps in high-frequency applications. This micropump system was proposed to meet the requirements of 1–5 ml/min for microthrusters or drug delivery devices.

In this paper, a comprehensive analysis indicator and numerical procedure were disclosed and used to demonstrate the fluid dynamic characteristics and performance of a micropump. Accordingly, the reliability of the two-way coupling calculation was ensured through mutual verification of the real structure and the numerical system.

The research results indicate that the Polydimethylsiloxane (PDMS) microchannel can realize the contraction and expansion mechanism, allowing the fluid to generate different levels of pressure gradient during the working stroke and also enhancing the characteristics of energy consumption and storage of the flow field.

The pressure gradient between the fluid and PDMS microchannel can facilitate the improvement of the fluid backflow in a micropump. Therefore, in terms of performance improvement, the PDMS micropump increased the maximum backflow and optimum efficiency by approximately 50 and 90%, respectively.

In fire resistance tests (FRTs) of building materials, a crucial criterion to pass the test procedure is to avoid the leakage of the hot flue gases caused by gaps and cracks occurring due to the thermal exposure. The present study's aim is to calculate the deformation of a steel door, which is embedded within a wall made of bricks, and qualitatively determine the flue gas leakage.

A computational fluid dynamics/finite element method (CFD/FEM) coupling was introduced representing an intermediate approach between a one-way and a full two-way coupling methodology, leading to a simplified two-way coupling (STWC). In contrast to a full two way-coupling, the heat transfer through the steel door was simulated based on a one-way approach. Subsequently, the predicted temperatures at the door from the one-way simulation were used in the following CFD/FEM simulation, where the fluid flow inside and outside the furnace as well as the deformation of the door were calculated simultaneously.

The simulation showed large gaps and flue gas leakage above the door lock and at the upper edge of the door, which was in close accordance to the experiment. Furthermore, it was found that STWC predicted similar deformations compared to the one-way coupling.

Since two-way coupling approaches for fluid/structure interaction in fire research are computationally demanding, the number of studies is low. Only a few are dealing with the flue gas exit from rooms due to destruction of solid components. Thus, the present study is the first two-way approach dealing with flue gas leakage due to gap formation.

The purpose of this paper is to develop a two-way coupling approach for investigating the aerodynamic stability of vehicles under the combined effect of crosswind and road adhesion.

The author develops a new two-way coupling approach, which couples large eddy simulation with multi-body dynamics (MBD), to investigate the crosswind stability on three different adhesion roads: ideal road, dry road and wet road. The comparison of the results obtained using the traditional one-way coupling approach and the new two-way coupling approach is also done to assess the necessity to use the proposed coupling technique on low adhesion roads, and the combined effect of crosswind and road adhesion on vehicle stability is analyzed.

The results suggest that the lower the road adhesion is, the larger deviation a vehicle generates, the more necessary to conduct the two-way coupling simulation. The combined effect of the crosswind and road adhesion can decrease a vehicle’s lateral motion on a high adhesion road after the disappearing of the crosswind. But on a low adhesion road, the vehicle tends to be unstable for its large head wind angle. The vehicle stability in crosswind on a low adhesion road needs more attention, and the investigation should consider the coupling of aerodynamics and vehicle dynamics and the combined effect of crosswind and road adhesion.

Developing a new two-way coupling approach which can capture the complex vehicle structures and the road adhesion with MBD model and the completed fluid filed structure with CFD model. The present study might be the first study considering the coupling of crosswind and low adhesion road. The proposed two-way coupling approach will be useful for researchers who study vehicle crosswind stability.

Abnormal vibrations often occur in the liquid oxygen kerosene transmission pipelines of rocket engines, which seriously threaten their safety. Improper handling can result in failed rocket launches and significant economic losses. Therefore, this paper aims to examine vibrations in transmission pipelines.

In this study, a three-dimensional high-pressure pipeline model composed of corrugated pipes, multi-section bent pipes, and other auxiliary structures was established. The fluid–solid coupling method was used to analyse vibration characteristics of the pipeline under various external excitations. The simulation results were visualised using MATLAB, and their validity was verified via a thermal test.

In this study, the vibration mechanism of a complex high-pressure pipeline was examined via a visualisation method. The results showed that the low-frequency vibration of the pipe was caused by fluid self-excited pressure pulsation, whereas the vibration of the engine system caused a high-frequency vibration of the pipeline. The excitation of external pressure pulses did not significantly affect the vibrations of the pipelines. The visualisation results indicated that the severe vibration position of the pipeline thermal test is mainly concentrated between the inlet and outlet and between the two bellows.

The results of this study aid in understanding the causes of abnormal vibrations in rocket engine pipelines.

The causes of different vibration frequencies in the complex pipelines of rocket engines and the propagation characteristics of external vibration excitation were obtained.

Bulk material-handling equipment development can be accelerated and is less expensive when testing of virtual prototypes can be adopted. However, often the complexity of the interaction between particulate material and handling equipment cannot be handled by a single computational solver. This paper aims to establish a framework for the development, verification and application of a co-simulation of discrete element method (DEM) and multibody dynamics (MBD).

The two methods have been coupled in two directions, which consists of coupling the load data on the geometry from DEM to MBD and the position data from MBD to DEM. The coupling has been validated thoroughly in several scenarios, and the stability and robustness have been investigated.

All tests clearly demonstrated that the co-simulation is successful in predicting particle–equipment interaction. Examples are provided describing the effects of a coupling that is too tight, as well as a coupling that is too loose. A guideline has been developed for achieving stable and efficient co-simulations.

This framework shows how to achieve realistic co-simulations of particulate material and equipment interaction of a dynamic nature.

The purpose of this paper is to experimentally and numerically study the transient hydraulic impact and overall performance during startup accelerating process of mixed-flow pump.

In this study, the impeller rotor vibration characteristics during the starting period under the action of fluid–structure interaction was investigated, which is based on the bidirectional synchronization cooperative solving method for the flow field and impeller structural response of the mixed-flow pump. Experimental transient external characteristic and the transient dimensionless head results were compared with the numerical calculation results, to validate the accuracy of numerical calculation method. Besides, the deformation and dynamic stress distribution of the blade under the stable rotating speed and accelerating condition were studied based on the bidirectional fluid–structure interaction.

The results show that the combined action of complex hydrodynamic environment and impeller centrifugal force in the startup accelerating process makes the deformation and dynamic stress of blade have the rising trend of reciprocating oscillation. At the end of acceleration, the stress and strain appear as transient peak values and the transient effect is nonignorable. The starting acceleration has a great impact on the deformation and dynamic stress of blade, and the maximum deformation near the rim of impeller outlet edge increases 5 per cent above the stable condition. The maximum stress value increases by about 68.7 per cent more than the steady-state condition at the impeller outlet edge near the hub. The quick change of rotating speed makes the vibration problem around the blade tip area more serious, and then it takes the excessive stress concentration and destruction at the blade root.

This study provides basis and reference for the safety operation of pumps during starting period

The purpose of this study a fast procedure for the structural analysis of gas turbine blades in aircraft engines. In this connection, investigations on the behavior of gas turbine blades concentrate on the analysis and evaluation of starting dynamics and fatigue strength. Besides, the influence of structural mistuning on the vibration characteristics of the single blade is analyzed and discussed.

A basic computation cycle is generated from a flight profile to describe the operating history of the gas turbine blade properly. Within an approximation approach for high-frequency vibrations, maximum vibration amplitudes are computed by superposition of stationary frequency responses by means of weighting functions. In addition, a two-way coupling approach determines the influence of structural mistuning on the vibration of a single blade. Fatigue strength of gas turbine blades is analyzed with a semi-analytical approach. The progressive damage analysis is based on MINER’s damage accumulation assuming a quasi-stable behavior of the structure.

The application to a gas turbine blade shows the computational capabilities of the approach presented. Structural characteristics are obtained by robust and stable computations using a detailed finite element model considering different load conditions. A high quality of results is realized while reducing the numerical costs significantly.

The method used for analyzing the starting dynamics is based on the assumption of a quasi-static state. For structures with a sufficiently high stiffness, such as the gas turbine blades in the present work, this procedure is justified. The fatigue damage approach relies on the existence of a quasi-stable cyclic stress condition, which in general occurs for isotropic materials, as is the case for gas turbine blades.

Owing to the use of efficient analysis methods, a fast evaluation of the gas turbine blade within a stochastic analysis is feasible.

The fast numerical methods and the use of the full finite element model enable performing a structural analysis of any blade structure with a high quality of results.

Gives introductory remarks about chapter 1 of this group of 31 papers, from ISEF 1999 Proceedings, in the methodologies for field analysis, in the electromagnetic community. Observes that computer package implementation theory contributes to clarification. Discusses the areas covered by some of the papers ‐ such as artificial intelligence using fuzzy logic. Includes applications such as permanent magnets and looks at eddy current problems. States the finite element method is currently the most popular method used for field computation. Closes by pointing out the amalgam of topics.

The reported mathematical models of gas–liquid flow in single snorkel Rheinstahl–Heraeus (SSRH) are based on the assumption of steady Ar-molten steel flow. The purpose of this paper is to develop a mathematical model to describe the unsteady turbulent flow (CO-Ar-molten steel) with nonequilibrium decarburization reaction.

On the base of the finite volume method, the computational fluid dynamics software CFX is used to predict the unsteady fluid flow, the spatial distributions of CO/argon gas and carbon element. The water model experiment and the industrial experiment are carried out to verify the mathematical models.

A two-way coupling model (T-WCM) based on algebraic slip model is developed to investigate the coupling phenomena. The related results show that T-WCM is more rigorous and accurate than one-way coupling model in predicting carbon content of molten steel. The amount of CO gas, which can enhance turbulent flow and mass transfer, is about three times the argon gas blown into SSRH.

CO gas is the key factor in investigating the transport phenomena. This study fully reveals the truth about the unsteady gas-liquid flow in SSRH. It is necessary to adopt T-WCM based on algebraic slip model to describe the CO-Ar-molten steel flow phenomenon.

The sandy environment is one of the typical environments in which helicopters operate. Air-sand two-phase flow in sandy environments may be an important factor affecting flight safety. Taking a typical example, this paper aims to investigate the aerodynamic and rotor trim characteristics of the UH-60 helicopter in sandy environments.

A computational study is conducted to simulate the air-sand flow over airfoils based on the Euler–Lagrange framework. The simulation uses the S-A turbulence model and the two-way momentum coupling methodology. Additionally, the trim characteristics of the UH-60 rotor are calculated based on the isolated rotor trim algorithm.

The simulation results show that air-sand flow significantly affects the aerodynamic characteristics of the SC1095 airfoil and the SC1094R8 airfoil. The presence of sand particles leads to a decrease in lift and an increase in drag. The calculation results of the UH-60 helicopter rotor indicate that the thrust decreases and the torque increases in the sandy environment. To maintain a steady forward flight in sandy environments, it is necessary to increase the collective pitch and the longitudinal cyclic pitch.

In this paper, the aerodynamic characteristics of airfoils and the trim characteristics in the air-sand flow of the UH-60 helicopter are discussed, which might be a new view to analyse the impact of sandy environments on helicopter safety and manoeuvring.