Search results

Emerging economies have been highlighted as an important growth source of the global economy. However, this group of countries has not received enough academic attention yet. Therefore, this study aims to identify the impact of research and development (R&D) expenditure on economic growth in emerging economies.

The theoretical framework of the production function is applied to quantitatively analyse the impact of R&D expenditure on economic growth with a sample of 29 emerging economies in the period between 1996 and 2019.

The panel cointegration test confirms the existence of long-run cointegration relationships between economic growth and independent variables in these emerging economies. Besides, the estimated results show that the national R&D expenditure has positive effects on economic growth from both direct and interaction dimensions. This evidence has filled the empirical research gap in the R&D-growth nexus in the case of emerging economies. Finally, while gross capital and education have positive impacts on growth, corruption has a harmful effect on economic growth in these countries.

The results highlight that policymakers should enhance R&D expenditure and R&D activities as the key national development strategy. The investment in R&D not only helps emerging economies avoid the middle-income trap but also pushes these countries to successfully join the group of developed countries.

To the best of the authors’ knowledge, this research is among the first to examine the impact of R&D expenditure on economic growth with a homogeneous sample of emerging economies. The results are obviously helpful for policymakers to use R&D as the key development strategy for supporting economic growth in emerging economies in the future.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

The purpose of this paper is to assess the hydrogen embrittlement sensitivity of carbon gradient heterostructure materials and to verify the reliability of the scratch method.

The surface-modified layer of 18CrNiMo7-6 alloy steel was delaminated to study its hydrogen embrittlement characteristics via hydrogen permeation, electrochemical hydrogen charging and scratch experiments.

The results showed that the diffusion coefficients of hydrogen in the surface and matrix layers are 3.28 × 10⁻⁷ and 16.67 × 10⁻⁷ cm²/s, respectively. The diffusible-hydrogen concentration of the material increases with increasing hydrogen-charging current density. For a given hydrogen-charging current density, the diffusible-hydrogen concentration gradually decreases with increasing depth in the surface-modified layer. Fracture toughness decreases with increasing diffusible-hydrogen concentration, so the susceptibility to hydrogen embrittlement decreases with increasing depth in the surface-modified layer.

The reliability of the scratch method in evaluating the fracture toughness of the surface-modified layer material is verified. An empirical formula is given for fracture toughness as a function of diffused-hydrogen concentration.

Evaluating the implementation of environmental management plans (EMPs) in highway construction projects is essential to avoid climate change. Public evaluations can help ensure that the EMP is implemented correctly and efficiently. To allow public evaluation of EMP implementations, this study aims to investigate performance indicators (PIs) for assessing EMP implementation in highway construction projects. To that end, the study objectives are to compare the critical PIs between environment auditors (EAs) and environment officers (EOs) and among the main project stakeholders (i.e. clients, contractors and consultants), create components for the critical PIs and assess the efficiency of the components.

The paper identified 39 PIs from interviews with environmental professionals and a systematic literature review. Then a questionnaire survey was developed based on the PIs and sent to EAs and EOs. The data were analyzed via mean score ranking, normalization, agreement analysis, factor analysis and fuzzy synthetic evaluation (FSE).

The analyses revealed 21 critical PIs for assessing EMP implementation in highway construction projects. Also, the critical PIs can be grouped into four components: ecological, pollution, public safety and ecological. Finally, the overall importance of the critical PIs from the FSE is between important and very important.

To the best of the authors’ knowledge, this paper is the first-of-its-kind study on the critical PIs for assessing EMP implementation in highway construction projects.

The relationship between industrial policy and exploratory innovation is imperfect.

The authors use Chinese high-tech enterprise identification policy (HTEP) as a natural experimental group to test policy impacts, spillover effects and mechanisms of action.

First, HTEP promotes exploratory innovation. In addition, HTEP has a greater impact on non-exploratory innovation. Second, HTEP has spillover effects in two phases: HTEP (2008) and the 2016 policy reform. HTEP affects exploratory innovation in nearby non-high-tech firms, and the policy effect decreases monotonically with increasing distance from the treatment group. Third, HTEP affects innovation capacity through financing constraints, technical personnel flow and knowledge flow, which explains not only policy effects but also spillover effects. Fourth, the analysis of policy heterogeneity shows that the 2016 policy reforms reinforce the positive effect of HTEP (2008). By deducting the effects of other policies, the HTEP effect is found to be less volatile. In terms of the continuity of policy identification, continuous uninterrupted identification has a crucial impact on the improvement of firms’ innovation capacity compared to repeated certification and certification expiration. Finally, HTEP has a crowding-out effect in state-owned enterprises and large firms’ innovation.

This paper contributes to the existing literature in several ways. First, the authors enrich the literature on industrial policy through exploratory innovation research. While previous studies have focused on R&D investment and patents (Dai and Wang, 2019), exploratory innovation helps firms break away from the inherent knowledge mindset and achieve sustainable innovation. Second, few studies have explored the characteristics of industrial policies. In this paper, the authors subdivide the sample into repeated certification, continuous certification and certification expiration according to high-tech enterprise identification. In addition, the authors compare the differences in policy implementation effects between the 2016 policy reform and the 2008 policy to provide new directions for business managers and policy makers. Third, innovation factors guided by industrial policies may cluster in specific regions, which in turn manifest externalities. This is when the policy spillover effect is worth considering. This paper fills a gap in the industrial policy literature by examining the spillover effects. Finally, this paper also explores the mechanisms of policy effects from three perspectives: financing constraints, technician mobility and knowledge mobility, which can affect not only the innovation of beneficiary firms directly but also indirectly the innovation of neighboring non-beneficiary firms.

The color painting of ancient buildings has high historical and artistic value but is prone to aging due to long-term outdoor exposure. The purpose of this study is to develop a new type of sealing coating to mitigate the impact of ultraviolet (UV) light on color painting.

The new coating was subjected to a 500-h UV-aging test. Compared with the existing acrylic resin Primal AC33, the UV aging behavior of the new coating, such as color difference and gloss, was studied with aging time. The Fourier infrared spectra of the coatings were analyzed after the UV-aging test.

Compared with AC33, the antiaging performance of SF8 was substantially improved. SF8 has a lower color difference value and better light retention and hydrophobicity. The Fourier transform infrared spectroscopy results showed that the C-F bond and Si-O bonds in the resin of the optimized sealing coating protected the main chain C-C structure from degradation during the aging process; thus, the resin maintained good stability. The hindered amine light stabilizer TN292 added to the coating inhibited the antiaging process by trapping active free radicals.

To address the problem of UV aging of oil-decorated colored paintings, a new type of sealing coating with excellent antiaging properties was developed, laying the foundation for its demonstration application on the surface of ancient buildings.

We conduct a multidisciplinary systematic literature review on climate neutrality in the supply chain. While carbon neutrality has gained prominence, our study argues that achieving carbon neutrality alone is not enough to address climate change effectively, as non-CO₂ greenhouse gases (GHG) are potent contributors to global warming.

We used multiple databases, including EBSCO, ProQuest, Science Direct, Emerald and Google Scholar, to identify articles related to climate neutrality in the context of non-CO₂ gases. A total of 71 articles in environmental science, climate change, energy systems, agriculture and logistics are reviewed to provide insights into the climate neutrality of supply chains.

We find that, in addition to CO₂, other GHG such as methane, nitrous oxide, ozone and fluorinated gases also significantly contribute to climate change. Our literature review identified several key pillars for achieving net-zero GHG emissions, including end-use efficiency and electrification, clean electricity supply, clean fuel supply, “GHG capture, storage and utilization,” enhanced land sinks, reduced non-CO₂ emissions and improved feed and manure management.

We contribute to the literature on climate neutrality of supply chains by emphasizing the significance of non-CO₂ GHG along with CO₂ and highlighting the need for a comprehensive approach to climate neutrality in addressing climate change. This study advances the understanding of climate neutrality of supply chains and contributes to the discourse on effective climate change mitigation strategies. It provides clear future research directions.

Despite being a Muslim-dominated country, Bangladesh has widely embraced traditional microfinance since its inception in the mid-1970s. However, Islamic microfinance, which has a lot to offer to the poor, is still in its infancy and has yet to gain momentum in the country. Therefore, the purpose of this study is to analyze the importance of Islamic microfinance and propose alternative Shariah-compliant microfinance models in Bangladesh.

This study is based on the desk research method, which relies on existing literature to collect secondary data on key concerns of traditional microfinance programs. In addition, institutional-level secondary data were also collected from the Microcredit Regulatory Authority (MRA) of Bangladesh. Guided by the Maqasid-al-Shariah, this study then proposes several Islamic microfinance models to overcome selected challenges faced by the microfinance industry in Bangladesh.

This study suggested three composite Shariah-compliant microfinance models, which are likely to help the underprivileged and thus ensure the achievement of the sustainable development goals in Bangladesh. The first model explained how the operational strategy of incumbent microfinance institutions (MFIs) could be restructured, while the second proposed the organizational strategies for establishing a new MFI. The third model used the notion of Sadaqah (charity) to address the multiple borrowing issues of the industry. Meanwhile, the successful transformation of the conventional microfinance industry to an Islamic one is dependent on the effective collaboration between the regulatory authorities, practitioners and MFIs.

Albeit the paucity of literature on the topic, the findings of this study will guide policymakers/practitioners in designing relevant microfinance models to help transform conventional microfinance into Islamic microfinance in Bangladesh.

To ensure that students are well prepared to successfully analyze this case, they should be familiar with the following concepts, theories and principles:

▪ Stakeholder theory

▪ Concept of duty to consult and accommodate

▪ Concept of social license to operate (SLO)

▪ Concept of indigenous economic self-determination

▪ Indigenous world view

▪ Seventh generation principle

▪ Cree principles

▪ Dene principles

The information provided in this case was gathered by the authors through face-to-face interviews, phone interviews, e-mail exchanges and secondary research. Meadow Lake Tribal Council (MLTC) separates business operations from council operations through use of corporate entities (as shown in Exhibit 1 of the case). Meadow Lake Tribal Council II (MLTCII) is the corporate entity that oversees two companies referenced in the case: Mistik Management and NorSask Forest Products LP. Interviews were conducted with the General Manager at Mistik Management, Certification Coordinator at Mistik Management, Chief of Buffalo River Dene Nation, Chief of Waterhen Lake First Nation, MLTC Vice-Chief, Board Member and Advisor to MLTCII, President and CEO of MLTCII, MLTCII Business Development Consultant and a former consultant with MLTC, NorSask Forest Products and Mistik Management.

Mistik Management Ltd., a forestry management company co-owned by the nine First Nations of MLTC, was a leader in economic reconciliation in 2022. However, the company had dealt with significant challenges not long after it was established in 1989. Richard Gladue, former Chief of the one of MLTCs Member First Nations and a leader in economic development at MLTC, had been actively involved in establishing the organization. Gladue loved the life and vitality of the boreal forest in the Meadow Lake region and felt a sense of responsibility to take care of the forest and the land for generations to come. This responsibility was balanced with the acknowledgement that the forest also provided vast economic development, employment and wealth generation opportunities for MLTC and its Member First Nations.

In the early 1990s, MLTC and Mistik Management dealt with a year-long blockade by a group of protesters that included members of Canoe Lake Cree First Nation, one of the Member First Nations of MLTC. They had not been consulted on Mistik’s processes and policies, and the company’s clear-cut logging had affected their ability to continue their traditional way of life and practices on the land. After the incident, Mistik Management moved more quickly to invest in a co-management process that they were still refining and using in 2022 when consulting with Indigenous groups and communities.

A natural resource economy brings together Indigenous peoples, industry and government. In this case, students will learn about the important role that relationships play and how decisions are made when balancing complex legal, environmental and economic interests. Students will learn about the history of duty to consult and accommodate in Canada; conduct a stakeholder analysis and reflect on how decisions affect stakeholder interests; and make recommendations for meaningful Indigenous engagement strategies using the concept of social license and indigenous principles.

This case is suitable for use in undergraduate courses on indigenous business, ethical decision-making, public policy and/or natural resource development. There may also be applications in other fields of study, including anthropology, economics and political science.

If the case is used in an indigenous business course, it would be best positioned in the last third of the class, after topics such as duty to consult and accommodate, social license and meaningful engagement with indigenous communities have been covered. If used in an ethical decision-making course, it would be best used when discussing stakeholder theory and engaging in stakeholder analysis. If used in a public policy course, the case could be used to start a discussion around the duty to consult and accommodate indigenous communities in Canada. If used in a natural resource development course, the case would be best used as an example of indigenous economic development.

The durability of concrete containing recycled aggregates, sourced from concrete specimens that have been tested in laboratory testing facilities, remains understudied. This paper aims to present the results of experiments investigating the effect of incorporating such type of concrete waste on the strength and durability-related properties of concrete.

A total of 77 concrete cylinders sized Ø100 × 200 mm with varying amount of recycled concrete aggregate (RCA) (0%–100% by volume, at 25% increments) and maximum aggregate size (12.5, 19.0 and 25.0 mm) were fabricated and tested for slump, compressive strength, sorptivity and electrical resistivity. Disk-shaped specimens, 50-mm thick, were cut from the original cylinders for sorptivity and resistivity tests. Analysis of variance and post hoc test were conducted to detect statistical variability among the data.

Compared to regular concrete, a reduction of slump (by 18.6%), strength (15.1%), secondary sorptivity (31.5%) and resistivity (17.0%) were observed from concrete containing 100% RCA. Statistical analyses indicate that these differences are significant. In general, an aggregate size of 19 mm was found to produce the optimum value of slump, compressive strength and sorptivity in regular and RCA-added concrete.

The results of this study suggest that comparable properties of normal concrete were still achieved by replacing 25% of coarse aggregate volume with 19-mm RCA, which was processed from laboratory-tested concrete samples. Therefore, such material can be considered as a potential and sustainable alternative to crushed gravel for use in light or nonstructural concrete construction.