Search results

The manufacture of polymer composites with a lower environmental footprint requires incorporation of sustainably sourced components. In addition, the incorporation of novel components should not compromise the material properties. The purpose of this paper is to demonstrate the use of a synthetic amine functional toluidine acetaldehyde condensate (AFTAC) as a modifier for fiber-reinforced epoxy composites. One of the fiber components was sourced from agricultural byproducts, and glass fiber was used as the fiber component for comparison.

The AFTAC condensate was synthesized via an acid-catalyzed reaction between o-toluidine and acetaldehyde. To demonstrate its efficacy as a toughening agent for diglycidyl ether bisphenol A resin composites and for the comparison of reinforcing materials of interest, composites were fabricated using a natural fiber (mat stick) and a synthetic glass fiber as the reinforcing material. A matched metal die technique was used to fabricate the composites. Composites were prepared and their mechanical and thermal properties were evaluated.

The inclusion of AFTAC led to an improvement in the mechanical strengths of these composites without any significant deterioration of the thermal stability. It was also observed that the fracture strengths for mat stick fiber-reinforced composites were lower than that of glass fiber-reinforced composites.

To the best of the authors’ knowledge, the use of the AFTAC modifier as well as incorporation of mat stick fibers in epoxy composites has not been demonstrated previously.

The purpose of this scoping rapid review was to identify and analyse existing qualitative methodologies that have been used to investigate K-12 teachers' lived experiences of adult cyber abuse as a result of student content “going viral” to propose a novel methodological stance incorporating the Australian Online Safety Act 2021.

A search of Google Scholar was conducted using keywords and phrases related to cyber trauma, teachers, qualitative methods and the Online Safety Act. Inclusion criteria for the review were: (1) published in English, (2) focused on teachers' experiences of online abuse and cyberbullying associated with viral posts and (3) employed a qualitative inquiry methodology. Full-text articles were obtained for those that met the inclusion criteria. Data were extracted and analysed using a PRISMA flowchart and inductive thematic analysis.

This methodology is considered to be justified, as the eSafety Commissioner's Safety-by-Design principles do not have any legal or regulatory enforceability, whereas the Online Safety Act 2021 provides the Australian eSafety Commissioner an avenue to drive greater algorithmic transparency and accountability.

The findings of this review informed the development of a novel methodological stance for investigating Australian teachers' lived experiences of adult cyber abuse associated with viral posts. It provides a methodological positioning to support trauma informed qualitative research into adult cyber abuse, informed by the work of the eSafety Commissioner and the Online Safety Act.

Cybertrauma is described as “any trauma that is a result of self- or, other-directed interaction with, mediated through, or from any electronic Internet/cyberspace ready device or machine learning algorithm, that results in impact now or the future” (Knibbs, 2021). It may result from the tracking of movement through various mobile phone features and applications such as location sharing, non-consensual monitoring of social media, and humiliation or punishment through the sharing of intimate images online, through to direct messages of abuse or threats of violence or humiliation. These actions are further perpetuated through automated searches, insights and recommendations on social media (i.e. engagement metrics promote memes, Facebook posts, Tweets, Tiktoks, Youtubes and so on). This is a novel methodology, as it not only considers direct cybertrauma but also automated forms of cybertrauma.

The Scottish economy was experiencing steady growth prior the hit of the COVID-19, with the pandemic causing the government to announce extreme lockdown measures with unprecedented impact on small and medium-sized enterprises (SMEs). Whilst some of the industry sectors in Scotland took a lighter hit, a large part of the organizations had to either adapt or completely disrupt their business. An essential aspect of their survival, risk management (RM) was among the areas requiring the most significant acceleration. This study compared the RM practices implemented by Scottish SMEs prior and after the outbreak as well as examined the attitudes of key decision-makers in the SMEs in relation to risk, including their perceived readiness for another crisis of similar significance.

An online survey based on ISO 31000 RM guidelines was distributed to 232 Scottish SMEs. Based on the official government reports and existing knowledge on how SMEs around the world have handled crisis events within the past 20 years, the authors developed the hypothesis that crisis events significantly accelerate SMEs' RM implementation. Around 13 items were tested in relation to the hypothesis and responses were tested via two-tailed T-test to establish significant statistical difference.

The research provides insight into the current state of risk management practices implemented by Scottish SMEs. As expected, SMEs showed significant difference in their RM implementation prior and after the COVID-19 outbreak. Whilst this has been viewed as a positive, motivations, priorities and approaches in managing risk demonstrated by the SMEs is questionable with views to their sustainable long-term recovery. The study highlights the lack of confidence instilled within the SMEs that they can handle another crisis of similar significance and provides directions for further investigation and improvements with the aim of helping the SMEs prepare better to mitigate the consequences of future crisis events.

In academic sense, the study offers a tested universal framework and a detailed questionnaire for assessment of RM strategy, applicable to organisations of various type, size and geography. Several implications with regards to managerial practices have been highlighted, including the neglect of the SMEs’ own internal environments and its significance in their risk strategies, the predominantly reactive approach to RM displayed by most Scottish SMEs as well as the neglect of compliance risk leading to potential quality and customer satisfaction issues preventing SMEs from full post-crisis recovery.

The purpose of this paper is to study the mechanochemical effect and self-growth mechanism of double-network (DN) gel and to provide a quasiperiodic model for rubber elasticity.

The chemical reaction kinetics is used to identify the mechanochemical transition probability of host brittle network and to explore the mechanical behavior of endosymbiont ductile network. A quasiperiodic model is proposed to characterize the cooperative coupling of host–endosymbiont networks using the Penrose tiling of a 2 × 2 matrix. Moreover, a free-energy model is formulated to explore the constitutive stress–strain relationship for the DN gel based on the rubber elasticity theory and Gent model.

In this study, a quasiperiodic graph model has been developed to describe the cooperative interaction between brittle and ductile networks, which undergo the mechanochemical coupling and mechanical stretching behaviors, respectively. The quasiperiodic Penrose tiling determines the mechanochemistry and self-growth effect of DNs.

It is expected to formulate a quasiperiodic graph model of host–guest interaction between two networks to explore the working principle of mechanical and self-growing behavior in DN hydrogels, undergoing complex mechanochemical effect. The effectiveness of the proposed model is verified using both finite element analysis and experimental results of DN gels reported in literature.

The silicone modifications of two-component epoxy resin coatings are commonly built on epoxy resins rather than on epoxy curing agents. The silicone-modified epoxy curing agent system is rarely reported yet. This study aims to prepare the polysiloxane (PS)-modified waterborne epoxy coatings based on aqueous curing agents technology.

Waterborne epoxy curing agents with different contents of terminal epoxy PS were synthesized by reacting with triethylenetetramine, followed by incorporating of epoxy resin (NPEL-128) and polyethylene glycol diglycidyl ether. The waterborne epoxy coatings were prepared with the above curing agents, and their performance was investigated through thermogravimetric analysis, scanning electron microscopy, mechanical characterization, gloss measurement, chemical resistance test and ultraviolet (UV) aging experiment.

The results showed that the epoxy coating prepared by silicon-modified curing agent has higher gloss, better chemical resistance and UV resistance than the coating from unmodified curing agent with terminal epoxy PS and commercially available waterborne epoxy curing agent (Aradur 3986), as well as the competitive mechanical properties and heat resistance. Reduced water absorption on fibrous paper was also obtained with the help of silicon-modified curing agent.

These findings will be valuable for resin researchers in addressing the modification issues about waterborne epoxy resin and curing agent.

The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.

The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.

The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.

This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.

In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

The study’s aim was to design and test a leadership development approach using blended learning, to equip leaders for strengthening their own resilience and that of their teams.

A contextualised leadership development intervention was produced and evaluated following the principles of design-based research. Participants were from three organisations that work internationally to address the impact of economic disadvantage. Initial research used the behavioural event interview technique. Online assessment incorporated measures of situational judgement, emotion recognition and attributional style. Validity measures were multi-rater feedback (criterion), and NEO-PI 3 (construct). Individual feedback and a simulation-based peer workshop were followed by a four-to-six month period of experience-driven development and a final peer workshop for consolidating and evaluating learning outcomes.

The online assessment was a valid measure of leaders’ personal resilience resources and their resilience-building capability. Overall, the intervention improved participants’ understanding of, and engagement with, the processes of strengthening individual and collective (team) resilience.

The target sample size for the study was relatively small, to ensure it would be practical to replicate the approach when designing similar interventions for a senior leadership population in other contexts. Significant results provided robust evidence for the validity of the assessment approach. Findings for the workshops and experience-driven development phase were more tentative, but the value of the design iterations was clearly demonstrated.

The leadership development approach is suitable for application in other organisations, if similar principles are followed to produce and evaluate materials relevant to each broad sector context. Roll-out is cost-effective, with relatively few hours of blended or virtual delivery supporting experience-driven learning.

The impact leaders have on the wellbeing of those who report to them is well established, but less has been done to develop and formally evaluate practical, cost-effective interventions to improve this impact. The approach validated in this study can be applied more widely to benefit employee wellbeing as well as performance.

The study developed and evaluated a new approach to preparing leaders for the challenge of building team resilience, an aspect of leadership capability that has been given relatively little attention to date.

This study aims to provide a salt ready-mix to instant fried noodles manufacturers.

Response surface methodology was used to get optimized salt ready-mix based on carbonate salt, disodium phosphate, tripotassium phospahte, sodium hexametaphosphate and sodium chloride. Peak viscosity of flour and yellowness, cooking loss and hardness of noodles were considered as response factors for finding optimized salt formulation.

The results showed that salts have an important role in governing quality of noodles. Optimum levels of five independent variables of salts, namely, carbonate salt (1:1 mixture of sodium to potassium carbonate), disodium phosphate, sodium hexametaphosphate, tripotassium phosphate and sodium chloride were 0.64%, 0.29%, 0.25%, 0.46% and 0.78% on flour weight basis, respectively.

To the best of the authors’ knowledge, this is the first study to assess the effect of different combinations of different salts on the quality of noodles. These findings will also benefit noodle manufacturers, assisting in production of superior quality noodles.

The purpose of this paper is to critically examine the multinational oil companies’ (MOCs) corporate social responsibility (CSR) initiatives in Nigeria. Its special focus is to investigate the impact of the global memorandum of understanding (GMoU) on mainstreaming gender sensitivity in cash crop market supply chains in the Niger Delta region of Nigeria.

This paper adopts an explanatory research design with a mixed method to answer the research questions and test the hypotheses. A total of 1,200 rural women respondents were sampled across the Niger Delta region.

Results from the use of a combined logit model and propensity score matching indicate a significant relationship between the GMoU model and mainstreaming gender sensitivity in cash crop market supply chains in the Niger Delta.

This study implies that MOCs’ CSR interventions that improve women’s access to land and encourage better integration of food markets through improved roads and increased mobile networks would enable women to engage in cash crop production.

This implies that improving access to credit through GMoU cluster farming targeted at female farmers would improve access to finance and extension services for women in cash crop production in the Niger Delta.

This research contributes to the gender debate in the agricultural value chain from a CSR perspective in developing countries and is rational for demands for social projects by host communities. It concludes that businesses have an obligation to help solve problems of public concern.

Food manufacturing supply chain systems are the most relevant wheels of the world economy since they provide essential products supporting daily life. Nevertheless, various supply inefficiencies have been reported to compromise food safety in different regions. Sustainable supplier management and digitalization practices have become cornerstone activities in addressing these shortcomings. Therefore, this paper proposes an integrated method for sustainability management in digital manufacturing supply chain systems (DMSCS) from the food industry.

The Intuitionistic Fuzzy Analytic Hierarchy Process (IF-AHP) was used to weigh the criteria and subcriteria under uncertainty. Second, the Intuitionistic Fuzzy Decision-Making Trial and Evaluation Laboratory (IF-DEMATEL) was applied to determine the main DMSCS sustainability drivers whilst incorporating the expert's hesitancy. Finally, the Combined Compromise Solution (CoCoSo) was implemented to pinpoint the weaknesses hindering DMSCS sustainability. A case study from the pork supply chain was presented to validate this method.

The most important criterion for DMSCS sustainability management is “location” while “manufacturing capacity” is the most significant dispatcher.

This paper presents a novel approach integrating IF-AHP, IF-DEMATEL, and CoCoSo methods for sustainability management of DMSCS pillaring the food industry.