Search results

This study investigates the coupling effects between temperature, permeability and stress fields during the development of geothermal reservoirs, comparing the impacts of inter-well pressure differentials, reservoir temperature and heat extraction fluid on geothermal extraction.

This study employs theoretical analysis and numerical simulation to explore the coupling mechanisms of temperature, permeability and stress fields in a geothermal reservoir using a thermal-hydrological-mechanical (THM) three-field coupling model.

The results reveal that the pressure differential between wells significantly impacts geothermal extraction capacity, with SC-CO2 achieving 1.83 times the capacity of water. Increasing the aperture of hydraulic and natural fractures effectively enhances geothermal production, with a notable enhancement for natural fractures.

The research provides a critical theoretical foundation for understanding THM coupling mechanisms in geothermal extraction, supporting the optimization of geothermal resource development and utilization.

The hybrid nanofluid flow due to a rotating disk has numerous applications, including centrifugal pumps, paper production, polymers dying, air filtration systems, automobile cooling and solar collectors. This study aims to investigate the convective heat transport and magnetohydrodynamics (MHD) hybrid nanofluid flow past a stretchable rotating surface using the Yamada-Ota and Xue models with the impacts of heat generation and thermal radiation.

The carbon nanotubes such as single-wall carbon nanotubes and multi-wall carbon nanotubes are suspended in a base fluid like water to make the hybrid nanofluid. The problem’s governing partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. Then, the numerical solutions are found with a bvp4c function in MATLAB software. The impacts of pertinent parameters on the flow and temperature fields are depicted in tables and graphs.

Two solution branches are discovered in a certain range of unsteadiness parameters. The fluid temperature and the rate of heat transport are enhanced when the thermal radiation and heat generation effects are increased. The Yamada-Ota model has a higher temperature than the Xue model. Furthermore, it is observed that only the first solution remains stable when the stability analysis is implemented.

To the best of the authors’ knowledge, the results stated are original and new with the investigation of MHD hybrid nanofluid flow with convective heat transfer using the extended version of Yamada-Ota and Xue models. Moreover, the novelty of the present study is improved by taking the impacts of heat generation and thermal radiation.

(1) A mathematical model for the Hybrid nanofluids flow is used as carriers for delivering drugs. (2) The flow conditions are controlled to enable drug-loaded nanofluids to flow through the smaller gap between the two tubes. (3) Hybrid nanofluids (HNFs) made from silver (Ag) and titanium dioxide (TiO₂) nanoparticles are analyzed for applications of drug delivery. (Ag) and (TiO₂) (NPs) are suitable candidates for cancer treatment due to their excellent biocompatibility, high photoactivity, and low toxicity. (4) The new strategy of artificial neural networks (ANN) is used which is machine-based and more prominent in validation, and comparison with other techniques.

The two Tubes are settled in such a manner that the gap between them is uniform. The Control Volume Finite Element Method; Rk-4 and Artificial Neural Network (ANN).

(1) From the obtained results it is observed that the dispersion and distribution of drug-loaded nanoparticles within the body will be improved by the convective motion caused by hybrid nanofluids. The effectiveness and uniformity of drug delivery to target tissues or organs is improved based on the uniform flow and uniform gap. (2) The targeting efficiency of nanofluids is further improved with the addition of the magnetic field. (3) The size of the cylinders, and flow rate, are considered uniform to optimize the drug delivery.

(1)The flow phenomena is considered laminar, one can use the same idea through a turbulent flow case. (2) The gap is considered uniform and will be interesting if someone extends the idea as non-uniform.

(1) To deliver drugs to the targeted area, a suitable mathematical model is required. (2) The analysis of hybrid nanofluids (HNFs) derived from silver (Ag) and titanium dioxide (TiO₂) nanoparticles is conducted for the purpose of drug delivery. The biocompatibility, high photoactivity, and low toxicity of (Ag) and (TiO₂) (NPs) make them ideal candidates for cancer treatment. (3) Machine-based artificial neural networks (ANN) have a new strategy that is more prominent in validation compared to other techniques.

The drug delivery model is a useful strategy for new researchers. (1) They can extend this idea using a non-uniform gap. (2) The flow is considered uniform, the new researchers can extend the idea using a turbulent case. (3) Other hybrid nanofluids flow, in the same model for other industrial usages are possible.

All the obtained results are new. The experimental thermophysical results are used from the existing literature and references are provided.

This study investigates the behavior of viscous hybrid ferromagnetic fluids flowing through plain elastic sheets with the magnetic polarization effect. It examines flow in a porous medium using Stefan blowing and utilizes a versatile hybrid ferrofluid containing MnZnFe₂O₄ and Fe₃O₄ nanoparticles in the C2H2F4 base fluid, offering potential real-world applications. The study focuses on steady, laminar and viscous incompressible flow, analyzing heat and mass transfer aspects, including thermal radiation, Brownian motion, thermophoresis and viscous dissipation with convective boundary condition.

The governing expression of the flow model is addressed with pertinent non-dimensional transformations, and the finite element method solves the obtained system of ordinary differential equations.

The variations in fluid velocity, temperature and concentration profiles against all the physical parameters are analyzed through their graphical view. The association of these parameters with local surface friction coefficient, Nusselt number and Sherwood number is examined with the numerical data in a table.

This work extends previous research on ferrofluid flow, investigating unexplored parameters and offering valuable insights with potential engineering, industrial and medical implications. It introduces a novel approach that uses mathematical simplification techniques and the finite element method for the solution.

This paper aims to provide a method for obtaining physically sound temperature fields to be used in geophysical inversions in the presence of immersed essential conditions.

The method produces a thermal field in agreement with a given location of the interface between the Lithosphere and Asthenosphere. It leverages the known location of the interface to enforce the location of a given isotherm while relaxing other constraints known with less precision. The method splits the domain: in the Lithosphere the solution is immediately obtained by standard procedures, while in the Asthenosphere a minimization problem is solved to fulfill continuity of temperatures (strongly imposed) and fluxes at the interface (weakly imposed).

The numerical methodology, based on the relaxation of the bottom fluxes, correctly recovers the thermal field in the complete domain. To obtain bottom fluxes following geophysical expected values, a constrained minimization strategy is required. The sensitivity of the method could be improved by relaxing other quantities such as lateral fluxes or mantle velocities.

A statement of the energy balance problem in terms of a known immersed condition is presented. A novel numerical procedure based on a domain-splitting strategy allows the solution of the problem. The procedure is tailored to be used within geophysical inversions and provides physically sound solutions.

Thermal energy storage systems use thermal energy to elevate the temperature of a storage substance, enabling the release of energy during a discharge cycle. The storage or retrieval of energy occurs through the heating or cooling of either a liquid or a solid, without undergoing a phase change, within a sensible heat storage system. In a sensible packed bed thermal energy storage system, the structure comprises porous media that form the packed solid material, while fluid occupies the voids. Thus, a cavity, partially filled with a fluid layer and partially with a saturated porous layer, has become important in the investigation of natural convection heat transfer, carrying significant relevance within thermal energy storage systems. Motivated by these insights, the current investigation delves into the convection heat transfer driven by buoyancy and entropy generation within a partially porous cavity that is differentially heated, vertically layered and filled with a hybrid nanofluid.

The investigation encompasses two distinct scenarios. In the first instance, the porous layer is positioned next to the heated wall, while the opposite region consists of a fluid layer. In the second case, the layers switch places, with the fluid layer adjacent to the heated wall. The system of equations for fluid and porous media, along with appropriate initial and boundary conditions, is addressed using the finite difference method. The Tiwari–Das model is used in this investigation, and the viscosity and thermal conductivity are determined using correlations specific to spherical nanoparticles.

Comprehensive numerical simulations have been performed, considering controlling factors such as the Darcy number, nanoparticle volume fraction, Rayleigh number, bottom slit position and Hartmann number. The visual representation of the numerical findings includes streamlines, isotherms and entropy lines, as well as plots illustrating average entropy generation and the average Nusselt number. These representations aim to provide insight into the influence of these parameters across a spectrum of scenarios.

The computational outcomes indicate that with an increase in the Darcy number, the addition of 2.5% magnetite nanoparticles to the GO nanofluid results in an enhanced heat transfer rate, showing increases of 0.567% in Case 1 and 3.894% in Case 2. Compared with Case 2, Case 1 exhibits a 59.90% enhancement in heat transfer within the enclosure. Positioning the porous layer next to the partially cooled wall significantly boosts the average total entropy production, showing a substantial increase of 11.36% at an elevated Rayleigh number value. Positioning the hot slit near the bottom wall leads to a reduction in total entropy generation by 33.20% compared to its placement at the center and by 33.32% in comparison to its proximity to the top wall.

The study aims to explore how Soret and Dufour diffusions, thermal radiation, joule heating and magnetohydrodynamics (MHD) affect the flow of hybrid nanofluid (Al₂O₃-SiO₂/water) over a porous medium using a mobile slender needle.

To streamline the analysis, the authors apply appropriate transformations to change the governing model of partial differential equations into a group of ordinary differential equations. Following this, the authors analyze the transformed equations using the homotopy analysis method within Mathematica software, leading to the derivation of analytical solutions. This study investigates how changing values for porous medium, MHD, Soret and Dufour numbers and thermal radiation influence concentration, temperature and velocity profiles. In addition, the research assesses the effects on local Sherwood number, skin friction and Nusselt number.

In this investigation, the authors explore the movement of a needle away from its origin ( ε > 0). As the magnetic and porous medium parameters increase, there is a correspondence decrease in the velocity profile. Simultaneously, an increase in the Dufour number and thermal radiation parameter yields to a higher temperature profile, whereas arise in the Soret number results in an enhanced concentration profile. Furthermore, growth in the magnetic field parameter is correlated with a reduction in skin friction, Nusselt and Sherwood numbers. In addition, an examination of the data reveals that an escalation in the thermal radiation parameter is associated with an elevation in the Nusselt number. Moreover, an elevation in the Dufour number results in an augmentation in the Nusselt number.

These results have practical applications across diverse fields, including heat transfer enhancement, energy conversion systems, advanced manufacturing and material processing.

This study is distinctive in its investigation of the flow of hybrid nanofluid (Al₂O₃-SiO₂/water) over a slender, moving needle. The analysis includes joule heating, MHD, porous medium, thermal radiation and considering the effects of Soret and Dufour.

This study aims to investigate magnetohydrodynamic (MHD) conjugate pure mixed convection considering interior heat production and resistive heating inside a square closed/open cavity featuring a rotating cylinder for aiding (clockwise) and opposing (counterclockwise) flow configurations. Moreover, the impacts of altering cylinder size and conductivity on the system’s overall performance to determine optimum conditions are examined in this investigation.

The closed chamber is differentially heated by keeping high and low temperatures at the vertical boundaries. In contrast, the open cavity has a heated left wall and an open right boundary. The Galerkin finite element method is used to solve the Navier–Stokes and the thermal energy equations, which construct the present study’s mathematical framework. Numerical simulations are conducted for the specified ranges of several controlling parameters: Reynolds (31.62 ≤ Re ≤ 1000), Grashof (10³ ≤ Gr ≤ 10⁶) and Hartmann numbers (0 ≤ Ha ≤ 31.62), and volumetric heat generation coefficient (Δ = 0, 3).

When Gr, Re and Ha simultaneously increase, the average Nusselt number along the warmed boundary rises accordingly. Conversely, interior heat production lowers heat transmission within the computational domain, which is also monitored regarding mean fluid temperature, overall entropy production and thermal performance criterion. Finally, the open cavity confirms better thermal performance than the closed cavity.

Comprehending the impacts of the magnetic field, Joule heating, internal heat generation and enclosed or open boundary on pure MHD combined free-forced convective flow offers valuable understandings of temperature fluctuations, velocity propagations, heat transport and irretrievable energy loss in numerous engineering applications.

Scientists have been conducting trials to find ways to reduce fuel consumption and enhance heat transfer rates to make heating systems more efficient and cheaper. Adding solid nanoparticles to conventional liquids may greatly improve their thermal conductivity, according to the available evidence. This study aims to examine the influence of external magnetic flux on the flow of a mixed convective Maxwell hybrid non-Newtonian nanofluid over a linearly extending porous flat plate. The investigation considers the effects of thermal radiation, Dufour and Soret.

The mathematical model is formulated based on the fundamental assumptions of mass, energy and momentum conservation. The implicit models are epitomized by a set of interconnected nonlinear partial differential equations, which include a suitable and comparable adjustment. The numerical solution to these equations is assessed for approximate convergence by the Runge−Kutta−Fehlberg method based on the shooting technique embedded with the MATLAB software.

The findings are presented through graphical representations, offering a visual exploration of the effects of various dynamic parameters on the flow field. These parameters encompass a wide range of factors, including radiation, thermal and Brownian diffusion parameters, Eckert, Lewis and Soret numbers, magnetic parameters, Maxwell fluid parameters, Darcy numbers, thermal and solutal buoyancy factors, Dufour and Prandtl numbers. Notably, the authors observed that nanoparticles with a spherical shape exerted a significant influence on the stream function, highlighting the importance of nanoparticle geometry in fluid dynamics. Furthermore, the analysis revealed that temperature profiles of nanomaterials were notably affected by their shape factor, while concentration profiles exhibited an opposite trend, providing valuable insights into the behavior of nanofluids in porous media.

A distinctive aspect of the research lies in its novel exploration of the impact of external magnetic flux on the flow of a mixed convective Maxwell hybrid non-Newtonian nanofluid over a linearly extending porous flat plate. By considering variables such as solar radiation, external magnetic flux, thermal and Brownian diffusion parameters and nanoparticle shape factor, the authors ventured into uncharted territory within the realm of fluid dynamics. These variables, despite their significant relevance, have not been extensively studied in previous research, thus underscoring the originality and value of the authors’ contribution to the field.

Recent advancements in technology have led to the exploration of solar-based thermal radiation and nanotechnology in the field of fluid dynamics. Solar energy is captured through sunlight absorption, acting as the primary source of heat. Various solar technologies, such as solar water heating and photovoltaic cells, rely on solar energy for heat generation. This study focuses on investigating heat transfer mechanisms by utilizing a hybrid nanofluid within a parabolic trough solar collector (PTSC) to advance research in solar ship technology. The model incorporates multiple effects that are detailed in the formulation.

The mathematical model is transformed using suitable similarity transformations into a system of higher-order nonlinear differential equations. The model was solved by implementing a numerical procedure based on the Wavelets and Chebyshev wavelet method for simulating the outcome.

The velocity profile is reduced by Deborah's number and velocity slip parameter. The Ag-EG nanoparticles mixture demonstrates less smooth fluid flow compared to the significantly smoother fluid flow of the Ag-Fe3O4/EG hybrid nanofluids (HNFs). Additionally, the Ag-Ethylene Glycol nanofluids (NFs) exhibit higher radiative performance compared to the Ag-Fe3O4/Ethylene Glycol hybrid nanofluids (HNFs).

Additionally, the Oldroyd-B hybrid nanofluid demonstrates improved thermal conductivity compared to traditional fluids, making it suitable for use in cooling systems and energy applications in the maritime industry.

The originality of the study lies in the exploration of the thermal transport enhancement in sun-powered energy ships through the incorporation of silver-magnetite hybrid nanoparticles within the heat transfer fluid circulating in parabolic trough solar collectors. This particular aspect has not been thoroughly researched previously. The findings have been validated and provide a highly positive comparison with the research papers.