Search results

The study aims to verify and establish the result of the most suitable optimization approach for higher performance and lower emission of a variable compression ratio (VCR) diesel engine. In this study, three types of test fuels are taken and tested in a variable compression ratio diesel engine (compression ignition). The fuels used are conventional diesel fuel, e-diesel (85% diesel-15% bioethanol) and nano-fuel (85% diesel-15% bioethanol-25 ppm Al₂O₃). The effect of bioethanol and nano-particles on performance, emission and cost-effectiveness is investigated at different load and compression ratios (CRs). The optimum performance and lower emission of the engine are evaluated and compared with other optimization methods.

The test engine is run by diesel, e-diesel (85% diesel-15% bioethanol) and nano-fuel (85% diesel-15% bioethanol-25 ppm Al₂O₃) in three different loadings (4 kg, 8 kg and 12 kg) and CR of 14, 16 and 18, respectively. The optimum value of energy efficiency, exergy efficiency, NO_X emission and relative cost variation are determined against the input parameters using Taguchi-Grey method and confirmed by response surface methodology (RSM) technique.

Using Taguchi-Grey method, the maximum energy and exergy efficiency, minimum % relative cost variation and NO_X emission are 24.64%, 59.52%, 0 and 184 ppm, respectively, at 4 kg load, 18 CR and fuel type of nano-fuel. Using RSM technique, maximum energy and exergy efficiency are 24.8% and 62.9%, and minimum NO_X emission and % cost variation are 208.4 ppm and –6.5, respectively, at 5.2 kg load, 18 CR and nano-fuel. The RSM is suggested as the most appropriate technique for obtaining maximum energy and exergy efficiency, and minimum % relative cost; however, for lowest possible NO_X emission, the Taguchi-Grey method is the most appropriate.

Waste rice straw is used to produce bioethanol. 4-E analysis, i.e. energy, exergy, emission and economic analysis, has been carried out, optimized and compared.

The purpose of this study to identify and optimize the machining of polyvinyl butyral (PVB) material for industrial uses. The research is based on input machining parameters of rotary ultrasonic machining for better understand the output response surface roughness (SR) property of polyvinyl butyral (PVB) by using the Taguchi approach. The grey relational grade analysis (GRG) is also implemented to resolve the complex interrelationship of SR data for optimization and predicting and validate the results.

In experimental work, the input parameters, namely, concentration, abrasives, power rate, grit size, tool material and hydrofluoric (HF) acid has been selected. The experiment’s design was created using MINITAB Software; the L27 orthogonal array was selected for the experimentation. SR was examined with the GRG technique for process optimization. On the other hand, for single parameter optimization analysis of variance (ANOVA) has been used.

ANOVA optimization technique gives the best result on concentration (40%) of abrasive (Al2O3+SiC+B4C), power rate (40%), grit size (600), HF acid (1.5%) and tool material (D2 alloy) are the optimal parameters to provide the slightest degree of SR. GRG optimization of multi-response parameter setting: 40% concentration, SiC+B4C mixed abrasive slurry, 40% of power rating, 280 grit size, 0.5% HF acid and high-speed tool steel tool material gives better results. The SR of PVB glass material improved by 20% after grey relational analysis.

There are several practical applications in a variety of material processing sectors, including metallurgy, machinery, electronics and transportation. These real-world applications have produced substantial and discernible economic benefits.

The analytical and optimization results will be used in the various material processing sectors, including metallurgy, machinery, electronics and transportation.

The ANOVA and grey theory approaches offer the reader a primary picture of the machining research and process parameter optimization. Combined abrasive slurry of Al₂O3+SiC+B₄C with a high power-rating exhibits lower SR. Similarly, grit size is vital; larger grits produce better SR. Ra – 0. 611 m is the lowest SR value at the hole found in trial 25 after the experimentation.

This study aims to improve the mechanical properties of an object produced by fused deposition modelling with high-grade polymer.

The study uses an ensembled surrogate-assisted evolutionary algorithm (SAEA) to optimize the process parameters for example, layer height, print speed, print direction and nozzle temperature for enhancing the mechanical properties of temperature-sensitive high-grade polymer poly-ether-ether-ketone (PEEK) in fused deposition modelling (FDM) 3D printing while considering print time as one of the important parameter. These models are integrated with an evolutionary algorithm to efficiently explore parameter space. The optimized parameters from the SAEA approach are compared with those obtained using the Gray Relational Analysis (GRA) Taguchi method serving as a benchmark. Later, the study also highlights the significant role of print direction in optimizing the mechanical properties of FDM 3D printed PEEK.

With the use of ensemble learning-based SAEA, one can successfully maximize the ultimate stress and percentage elongation with minimum print time. SAEA-based solution has 28.86% higher ultimate stress, 66.95% lower percentage of elongation and 7.14% lower print time in comparison to the benchmark result (GRA Taguchi method). Also, the results from the experimental investigation indicate that the print direction has a greater role in deciding the optimum value of mechanical properties for FDM 3D printed high-grade thermoplastic PEEK polymer.

This study is valid for the parameter ranges, which are defined to conduct the experimentation.

This study has been conducted on the basis of taking only a few important process parameters as per the literatures and available scope of the study; however, there are many other parameters, e.g. wall thickness, road width, print orientation, fill pattern, roller speed, retraction, etc. which can be included to make a more comprehensive investigation and accuracy of the results for practical implementation.

This study deploys a novel meta-model-based optimization approach for enhancing the mechanical properties of high-grade thermoplastic polymers, which is rarely available in the published literature in the research domain.

The weld joint mechanical properties of friction stir welding (FSW) are majorly reliant on different input parameters of the FSW machine. The study and optmization of these parameters is uttermost requirement and aim of this study to increase the suitability of FSW in different manufacturing industries. Hence, the input parameters are optimized through different soft computing methods to increase the considered objective in this study.

In this research, ultimate tensile strength (UTS), yield strength (YS) and elongation (EL) of FSW prepared butt joints of AA6061 and AA5083 Aluminium alloys materials are investigated as per American Society for Testing and Materials (ASTM E8-M04) standard. The FSW joints were prepared by changing the three input process parameters. To develop experimental run order design matrix, rotatable central composite design strategy was used. Furthermore, genetic algorithm (GA) in combination (Hybrid) with response surface methodology (RSM), artificial neural network (ANN), i.e. RSM-GA, ANN-GA, is exercised to optimize the considered process parameters.

The maximum value of UTS, YS and EL of test specimens on universal testing machine was measured as 264 MPa, 204 MPa and 14.41%, respectively. The most optimized results (UTS = 269.544 MPa, YS = 211.121 MPa and EL = 17.127%) are obtained with ANN-GA for the considered objectives.

The optimization of input parameters to increase the output objective values using hybrid soft computing techniques is unique in this research paper. The outcomes of this study will help the FSW using manufacturing industries to choose the best optimized parameters set for FSW prepared butt joint with improved mechanical properties.

Grey relational analysis (GRA) has already proved itself as an efficient tool for multi-objective optimization of many of the machining processes. In GRA, the distinguishing coefficient (ξ) plays an important role in identifying the optimal parametric combinations of the machining processes and almost all the past researchers have considered its value as 0.5. In this paper, based on past experimental data, the application of GRA is extended to dynamic GRA (DGRA) to optimize two electrochemical machining (ECM) processes.

Instead of a static distinguishing coefficient, this paper considers dynamic distinguishing coefficient for each of the responses for both the ECM processes under consideration. Based on these coefficients, the application of DGRA leads to determination of the dynamic grey relational grade (DGRG) and grey relational standard deviation (GRSD), helping in initial ranking of the alternative experimental trials. Considering the ranks obtained by DGRG and GRSD, a composite rank in terms of rank product score is obtained, aiding in final rankings of the experimental trials for both the ECM processes.

In the first example, the maximum material removal rate (MRR) would be obtained at an optimal combination of ECM parameters as electrolyte concentration = 2 mol/l, voltage = 16V and current = 4A, while another parametric intermix as electrolyte concentration = 2 mol/l, voltage = 14V and current = 2A would result in minimum radial overcut and delamination. For the second example, an optimal combination of ECM parameters as electrode temperature = 30°C, voltage = 12V, duty cycle = 90% and electrolyte concentration = 15 g/l would simultaneously maximize MRR and minimize surface roughness and conicity.

In this paper, two ECM operations are optimized using a newly developed but yet to be popular multi-objective optimization tool in the form of the DGRA technique. For both the examples, the derived rankings of the ECM experiments exactly match with those obtained by the past researchers. Thus, DGRA can be effectively adopted to solve parametric optimization problems in any of the machining processes.

The investigation aims to improve Nd: YAG laser technology for precision cutting of carbon fiber reinforcing polymers (CFRPs), specifically those containing newly created resin (NDR) from the polyethylene and polyurea group, is the goal of the study. The focus is on showing how Nd: YAG lasers may be used to precisely cut CFRP with NDR materials, emphasizing how useful they are for creating intricate and long-lasting components.

The study employs a systematic approach that includes complicated factorial designs, Taguchi L27 orthogonal array trials, Gray relational analysis (GRA) and machine learning predictions. The effects of laser cutting factors on CFRP with NDR geometry are investigated experimentally, with the goal of optimizing the cutting process for greater quality and efficiency. The approach employs data-driven decision-making with GRA, which improves cut quality and manufacturing efficiency while producing high-quality CFRP composites. Integration of machine learning models into the optimization process significantly boosts the precision and cost-effectiveness of laser cutting operations for CFRP materials.

The work uses Taguchi L27 orthogonal array trials for systematically explore the effects of specified parameters on CFRP cutting. The cutting process is then optimized using GRA, which identifies influential elements and determines the ideal parameter combination. In this paper, initially machining parameters are established at level L3P3C3A2, and the optimal machining parameters are determined to be at levels L3P2C3A3 and L3P2C1A2, based on predictions and experimental results. Furthermore, the study uses machine learning prediction models to continuously update and optimize kerf parameters, resulting in high-quality cuts at a lower cost. Overall, the study presents a holistic method to optimize CFRP cutting processes employing sophisticated techniques such as GRA and machine learning, resulting in better quality and efficiency in manufacturing operations.

The novel concept is in precisely measuring the kerf width and deviation in CFRP samples of NDR using sophisticated imaging techniques like SEM, which improves analysis and precision. The newly produced resin from the polyethylene and polyurea group with carbon fiber offers a more precise and comprehensive understanding of the material's behavior under different cutting settings, which makes it novel for kerf width and kerf deviation in their studies. To optimize laser cutting settings in real time while considering laser machining conditions, the study incorporates material insights into machine learning models.

This paper aims to investigate the influence of “BroncoCut-X” (copper core-ZnCu50 coating) electrode on the machining of Ti-3Al-2.5V in view of its extensive use in aerospace and medical applications. The machining parameters are selected as Spark-off Time (ST_off), Spark-on Time (ST_on), Wire-speed (S_w), Wire-Tension (WT) and Servo-Voltage (S_v) to explore the machining outcomes. The response characteristics are measured in terms of material removal rate (MRR), average kerf width (KW) and average-surface roughness (SA).

Taguchi’s approach is used to design the experiment. The “AC Progress V2 high precision CNC-WEDM” is used to conduct the experiments with ϕ 0.25 mm diameter wire electrode. The machining performance characteristics are examined using main effect plots and analysis of variance. The grey-relation analysis and fuzzy interference system techniques have been developed to combine (called grey-fuzzy reasoning grade) the experimental response while Rao-Algorithm is used to calculate the optimal performance.

The hybrid optimization result is obtained as ST_off = 50µs, ST_on = 105µs, S_w = 7 m/min, WT = 12N and S_v=20V. Additionally, the result is compared with the firefly algorithm and improved gray-wolf optimizer to check the efficacy of the intended approach. The confirmatory test has been further conducted to verify optimization results and recorded 8.14% overall machinability enhancement. Moreover, the scanning electron microscopy analysis further demonstrated effectiveness in the WEDMed surface with a maximum 4.32 µm recast layer.

The adopted methodology helped to attain the highest machinability level. To the best of the authors’ knowledge, this work is the first investigation within the considered parametric range and adopted optimization technique for Ti-3Al-2.5V using the wire-electro discharge machining.

This study aims to reveal the influence of milling process parameters on the surface roughness and morphology of superalloy GH4145.The groove milling mechanism and surface quality influence factors of superalloy GH4145 were studied experimentally.

This paper provides investigations on three-dimensional finite element model (FEM) and simulation of milling process for GH4145.The milling experiment uses Taguchi L16 experimental design and single factor experimental design. The surface morphology of the workpiece was observed by scanning electron microscopy, and the influence mechanism of milling parameters on surface quality is expounded.

The results show that the cutting force increases by 133% with the increase in milling depth. The measured minimum surface roughness is 0.035 µm. With the change in milling depth, the surface roughness increases by 249%. With the change in cutting speed, the surface roughness increased by 54.8%. As the feed rate increases, the surface roughness increases by a maximum of 91.1%. The milling experiment verifies that the error between the predicted surface roughness and the actual value is less than 8%.

The milling experiment uses a Taguchi L16 experimental design and a single-factor experimental design. Mathematical models can be used in research as a contribution to current research. In addition, the milling cutter can be changed to further test this experiment. Reveal the influence of milling process parameters on the surface roughness and morphology of superalloy GH4145.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0080/

This study aims to assess support vector machine (SVM) models' predictive ability to estimate half-cell potential (HCP) values from input parameters by using Bayesian optimization, grid search and random search.

A data set with 1,134 rows and 6 columns is used for principal component analysis (PCA) to minimize dimensionality and preserve 95% of explained variance. HCP is output from temperature, age, relative humidity, X and Y lengths. Root mean square error (RMSE), R-squared, mean squared error (MSE), mean absolute error, prediction speed and training time are used to measure model effectiveness. SHAPLEY analysis is also executed.

The study reveals variations in predictive performance across different optimization methods, with RMSE values ranging from 18.365 to 30.205 and R-squared values spanning from 0.88 to 0.96. Additionally, differences in training times, prediction speeds and model complexities are observed, highlighting the trade-offs between model accuracy and computational efficiency.

This study contributes to the understanding of SVM model efficacy in HCP prediction, emphasizing the importance of optimization techniques, model complexity and dimensionality reduction methods such as PCA.

Data breaches in the US healthcare sector have more than tripled in the last decade across all states. However, to this day, no established framework ranks all states from most to least at risk for healthcare data breaches. This gap has led to a lack of proper risk identification and understanding of cyber environments at state levels.

Based on the security action cycle, the National Institute of Standards and Technology (NIST) cybersecurity framework, the risk-planning model, and the multicriteria decision-making (MCDM) literature, the paper offers an integrated multicriteria framework for prioritization in cybersecurity to address this lack and other prioritization issues in risk management in the field. The study used historical breach data between 2015 and 2021.

The findings showed that California, Texas, New York, Florida, Indiana, Pennsylvania, Massachusetts, Minnesota, Ohio, and Georgia are the states most at risk for healthcare data breaches.

The findings highlight each US state faces a different level of healthcare risk. The findings are informative for patients, crucial for privacy officers in understanding the nuances of their risk environment, and important for policy-makers who must grasp the grave disconnect between existing issues and legislative practices. Furthermore, the study suggests an association between positioning state risk and such factors as population and wealth, both avenues for future research.

Theoretically, the paper offers an integrated framework, whose basis in established security models in both academia and industry practice enables utilizing it in various prioritization scenarios in the field of cybersecurity. It further emphasizes the importance of risk identification and brings attention to different healthcare cybersecurity environments among the different US states.