Search results

The purpose of this paper is to develop the device made of low temperature co-fired ceramics (LTCC) and lead zirconate titanate (PZT) by co-firing both materials. In the paper, the technology and properties of a miniature uniaxial ceramic accelerometer are presented.

Finite element method (FEM) is applied to predict properties of the sensor vs main dimensions of the sensor. The LTCC process is applied during manufacturing of the device. All the advantages of the technology are taken into account during designing three-dimensional structure of the sensor. The sensitivity and resonant frequency of the accelerometer are measured. Real material parameters of PZT are estimated according to measurement results and FEM simulations.

The ceramic sensor integrated with SMD package with outer dimensions of 5 × 5 × 5 mm3 is manufactured. The accelerometer exhibits sensitivity of 0.75 pC/g measured at 100 Hz. The resonant frequency is equal to about 2 kHz. Useful frequency range is limited by 3 dB sensitivity change at about 1 kHz.

Sensitivity of the device is limited by interaction between LTCC and PZT materials during co-firing process. The estimated d parameters are ten times worse comparing to bulk Pz27 material. Further research on materials compatibility should be carried out.

The sensor can be easily integrated into various devices made of standard electronic printed circuit boards (PCBs). Applied method of direct integration of piezoelectric transducers with LTCC material enables manufacturing of complex ceramic systems with built-in accelerometer in the substrate.

The accelerometer is a sensor and a package simultaneously. The miniature ceramic device is compatible with surface mounting technology; hence, it can be used directly on PCBs for vibration monitoring inside electronic devices and systems.

To find properties of screen printed PZT (PbZr_0.53Ti_0.47O₃ with 6 per cent of PbO and 2 per cent of Pb₅Ge₃O₁₁) thick films layers on LTCC substrate.

The influence of PZT firing time and electrode materials on electrical characteristics and microstructure were examined. A scanning electron microscope (SEM) equipped with an energy‐dispersive X‐ray (EDS) analyser was used for the microstructural and compositional analysis.

Microstructural and compositional analyses have shown the diffusion of SiO₂ from LTCC into PZT layers and the diffusion of PbO in the opposite direction. SiO₂ presumably forms low permitivity lead based silicates in PZT layer. The new phase deteriorates the piezoelectric properties. The amount of diffused materials was dependent upon the electrode material and increased with increasing firing time. Better properties, i.e. higher remanent polarisation and dielectric constant were achieved for samples with PdAg electrodes and shorter firing time.

New information on electrical and microstructural properties of thick film PZT made on LTCC substrate.

This work seeks to analyze the heat transfer phenomena of anisotropic thermal conductivity fabrics containing electric conductive yarns.

A numerical program, based on a spectral element method, is used to assess the heating fabric with a temperature control model. The study determines suitable parameters for the fabric by evaluating the temperature uniformity on the fabric surface. Effective thermal conductivities of the fabric are obtained by comparing the experimental and numerical results with each other, using a nonlinear least‐square fitting method.

The results indicate that employing high effective thermal conductivity of non‐electric conductive yarns in a direction perpendicular to electric conductive yarns helps to increase temperature uniformity. However, the effect of the high effective thermal conductivity of electric conductive yarns is not evident. Adopting a short distance between the electric conductive yarns and a thick fabric is also beneficial in increasing temperature uniformity. If the heating fabric is applied in a place where there is easy energy transfer between the surface of the fabric and moving air, collocation with high heating power is needed to maintain the temperature. Choosing an appropriate heating source is essential when considering temperature uniformity and energy savings using a temperature controller.

The findings will be useful in the design of heating fabrics.

The purpose of this paper is to present the application of low temperature cofired ceramics (LTCC) technology in the fabrication of a novel electronic device, which consists of an antenna amplifier integrated with temperature stabilizer. The temperature controller consists of a thick‐film thermistor and heater, which has been optimized using geometry to achieve uniform temperature distribution on the whole electronic substrate.

LTCC technology was applied in the fabrication process of the novel device. The temperature distribution on the ceramic substrate and temperature stabilization time were analyzed using an IR camera. The heating ability of the heater was tested in a climatic chamber. The heater and thermistors parameters variability were estimated using a basic mathematical statistic.

The integrated device ensures proper temperature conditions of electronic components if the ambient temperature is lower than −40°C.

The presented device is just a first prototype. Therefore, the fabrication of the next structures and further experiments will be needed to improve structural drawbacks and to analyze precisely the device reliability and parameters repeatability.

The device presented in the paper can be applied in systems working at very low ambient temperatures (even at −5°C). Moreover, a temperature stabilizer can increase the temperature of the whole device above −40°C, therefore, standard electronic components (which can work down to −40°C) can be used instead of specialized ones (which can work below −40°C).

This paper presents a novel temperature stabilizer.

Low temperature co‐fired ceramics (LTCC) material is introduced as an excellent alternative to silicon, glass, or plastic materials for the fabrication of miniaturised analytical devices, though it is most widely used in the automotive and microwave industries. The paper aims to study the laser ablation of LTCC material.

This kind of green tape material is mechanised by excimer laser (KrF, 248 nm) and UV laser (Nd: YAG, 355 nm), and for the first time by infra‐red laser (1,090 nm). The optical photos and the scanning electronic microscope (SEM) photos of the LTCC ablated by different kinds of laser sources are given in this paper.

When using the UV laser, the tapered structure can be easily seen from the SEM photo. However, a kind of clear and perfect ablation of LTCC can be seen for the first time by the 1,090 nm infra‐red laser ablation.

The laser ablation of LTCC by optical fibre sources is discussed.

The paper aims to present numerical modeling and technology of a very first three axial low temperature cofired ceramics (LTCC) accelerometer.

Low temperature cofired ceramics technology was applied in the fabrication process of the novel device. The numerical modeling was used to predict the properties of the accelerometer, moreover, design of the experiment methodology was used to reduce time of simulation and to get as much as information from the experiment as possible.

The low temperature cofired ceramics make it possible to fabricate three axial accelerometer.

The presented device is just a first prototype. Therefore, further research work will be needed to improve structural drawbacks and to analyze precisely the device reliability and parameters repeatability.

The device presented in the paper can be applied in systems working in a harsh environment (high temperature and humidity). Ceramic sensors can withstand temperatures up to 600°C.

This paper presents novel three axial LTCC accelerometer.

This paper aims to present a method for the reduction of dielectric constant of low-temperature co-fired ceramics (LTCC) substrates with the use of controlled internal porosity.

A glass-ceramic green tape with addition of graphite as a pore former was developed. The green tapes were laminated and then sintered into multilayer structures with porous interior and thin external dense layers. Microstructure of green and fired structures was studied using optical and scanning microscopy. The behavior of the samples during heating was examined in a heating microscope. Impedance spectroscopy was applied for investigation of dielectric properties of the fabricated substrates.

Microstructure and dielectric properties of the fabricated LTCC structures were compared with the characteristics for non-porous samples with the similar composition. Introduction of 50 Wt.% admixture of graphite in the internal layers of the LTCC substrate was found to result in decrease in dielectric constant value down to about 3. Application of non-porous outer layers improved mechanical strength of the structure and smoothness of its surface, allowing screen printing of conductive pastes on both sides of the substrate.

The rapid growth of the wireless communication industry has created a great demand for the development of new and improved materials and devices operating properly at high frequencies. The fabricated materials can be useful for substrates of microwave devices.

The paper presents an innovative method of dielectric constant decrease of substrate materials. Getting insight into the phenomena responsible for formation of pores is crucial for designing materials for microwave electronics.

There is limited evidence on the determinants of hospitalisation and its causes in India. This study aims to examine the differential in the hospitalisation rates and its socioeconomic determinants. This study also examines the causes of diseases in hospitalisation among the elderly (≥60 years) in India.

This study used data from the 75th round of the National Sample Survey Organizations, collected from July 2017 to June 2018. The elderly samples in this survey are 42,759, where 11,070 were hospitalised, and 31,689 were not hospitalised in the past year or 365 days. This study estimated hospitalisation rates and carried out binary logistic regression analysis to examine the associations of hospitalisation with the background variables. The cause of diseases in hospitalisations was also calculated.

The hospitalisation rate was lower among elderly female compared to elderly male. Elderly who belongs to middle-old aged groups, non-married, North-Eastern region, Southern region, general caste, health insurance, partially and fully economically dependent have a higher chance of being hospitalised. About 38% elderly were hospitalised due to communicable diseases (CDs), 52% due to non-communicable diseases (NCDs) and 10% due to injuries and others (IO). Nearly 40% elderly were hospitalised in public hospitals due to CDs, whereas 52% were hospitalised in private hospitals due to NCDs and 11% due to IO.

Firstly, this study is based on cross-sectional survey due to which temporal ambiguity averted to draw causal inferences. Secondly, other significant factors can also predict hospitalisations and provide insightful results, such as lifestyle factors, behavioral factors, obesity, mental state and several personal habits such as smoking cigarettes, drinking alcohol, consuming tobacco or other harmful substances. But this information was not available in this study. Even with these limitations, the hospitalisation issues among the elderly are beneficial to understand the current circumstances of CDs, NCDs and injury and other diseases for India and its states to formulate health policy.

Early screening and early treatment for NCDs are needed, which are non-existent in almost all parts of India. It is essential to necessitate and identify the important factors that best predict hospitalisation or re-visit of hospital admission. Although, the medical advances in India have made rapid strides in the past few decades, it is burdened none the less, as the doctor–patient ratio is very low. It is important to develop preventive measures to minimize the accidents and causalities to avoid substantial cost associated with elderly health care.

Raising awareness, promotion of healthy life style and improving the quality of good health-care provisions at primary level is a necessity.

The findings, practical and social implications provide a way forward for the health policymakers to potentially alter the future research to reduce associated comorbidities, unnecessary hospitalisations and other medical complications.

The purpose of this paper is to present the research activity and results to research and development society on the field of ceramic microsystems.

The chemical reactor was developed as a non-conventional application of low temperature co-fired ceramic (LTCC) and thick-film technologies. In the ceramic reactor with a large-volume, buried cavity, filled with a catalyst, the reaction between water and methanol produces hydrogen and carbon dioxide (together with traces of carbon monoxide). The LTCC ceramic three-dimensional (3D) structure consists of a reaction chamber, two inlet channels, an inlet mixing channel, an inlet distributor, an outlet collector and an outlet channel. The inlet and outlet fluidic barriers for the catalyst of the reaction chamber are made with two “grid lines”.

A 3D ceramic structure made by LTCC technology was successfully designed and developed for chemical reactor – methanol decomposition.

Research activity includes the design and the capability of materials and technology (LTCC) to fabricate chemical reactor with large cavity. But further dimensions-scale-up is limited.

The technology for the fabrication of LTCC-based chemical reactor was developed and implemented in system for methanol decomposition.

The approach (large-volume cavity in ceramic structure), which has been developed, can be used for other type of reactors also.