Search results
1 – 10 of over 80000Nadia Talbi, Aghiles Nekmouche, Mohand Ould Ouali, Naceur-Eddine Hannachi and Mohammed Naboussi Farsi
This paper aims to model the performances of frames structures by comparing the predictions of ordinary control concrete (CC) and concretes reinforced by fibers. Two types of…
Abstract
Purpose
This paper aims to model the performances of frames structures by comparing the predictions of ordinary control concrete (CC) and concretes reinforced by fibers. Two types of steel fibers were used in this work, industrial steel fibers (ISF) and tire-reclaimed fibers obtained by cutting virgin steel tire-cord to 50 mm, noticed virgin steel fibers (VSF). In total, 3% of VSF are used. The results obtained in this paper clearly show the contribution of fibers in improving the global and local behavior of the frames structures. VSF gives the same or better overall behavior as the use of industrial fibers for the same percentage of fibers, with the advantage that VSF contributes to the protection of the environment and limit the wastage of steel.
Design/methodology/approach
This work was carried out using the commercial finite element code Abaqus/Explicit. The behavior of the different concretes used in this study was modeled by the concrete damage plasticity (CDP) constitutive law. The methodology adopted to complete this work consisted in identifying, by calibration of the available experimental results with the numerical predictions, the parameters of the corresponding CDP model for each of the concretes used in this work. To this end, the authors have successively identified the CDP parameters for the CC-V (control concrete used by Vecchio and Emara, 1992) used in frame structure (R + 1). Subsequently, the CDP parameters of the CC-T (control concrete used by Tlemat, 2004), the CVSF (concrete with virgin steel fibers) and the CISF-1 (concrete with industrial steel fibers type 1, ISF-1) are identified using the experimental results of beams under bending tests. Once the model parameters were determined for each concrete, the authors conducted a series of simulations to show the benefit of introducing claimed and industrial fibers in frame structure (R + 1) and (R + 2). This approach recommends the use of concrete reinforced with steel fibers, mainly 6% by mass of VSF and ISF-1, in place of ordinary concrete in new construction to increase the resistance of structures and contribute, if applicable, to the protection of the environment.
Findings
The main findings of this study can be summarized by: the strength and ductility of the frames structures made of concrete fiber are significantly increased. The use of tire-reclaimed steel fibers (VSF) gives the same or better overall behavior as the use of industrial fibers. In addition to their good mechanical contribution, the tire-reclaimed fibers contribute to the protection of the environment and limit the wastage of steel. The use of fibers reduces the cracking zones in concrete fiber frames structures. The usefulness of distinguishing the interstory displacement limits set by codes, in particular, uniform building code (UBC-97), for ordinary concretes and concrete reinforced with fibers is addressed.
Originality/value
The contribution of tire-reclaimed and industrial fibers on the strength and ductility of reinforced concrete-frames structures is addressed. The use of tire-reclaimed steel fibers gives the same or better overall behavior as the use of industrial fibers, the tire-reclaimed fibers having the advantage of contributing to the protection of the environment and limiting the wastage of steel. The paper also points to the usefulness of distinguishing the interstory displacement limits set by codes, in particular UBC-97, for ordinary concrete and concrete reinforced with fibers, in accordance to the predictions of the capacity curves.
Details
Keywords
Hu Weibing, Chen Xing and He Jian
Based on the character of R‐C frame, the calculation formula of VED is derived from the sub‐structure plan of lateral resistant force, the definition of equivalent stiffness…
Abstract
Based on the character of R‐C frame, the calculation formula of VED is derived from the sub‐structure plan of lateral resistant force, the definition of equivalent stiffness matrix and equivalent additional viscoelastic force vector of VED is given and the seismic dynamic equation of R‐C frame controlled by VED is set up, the viscoelastic additional force vector of VED should be considered as outside load of structure and be calculated through the pseudo‐loading method, the programs of calculating the dynamic characteristic, calculating the elastic seismic response and calculating the elastic‐plastic seismic response of R‐C frame controlled by VED are compiled. Through the calculation of a inclined crossed R‐C frame, the results show that VED is effective in controlling the seismic response of frame and the pseudo‐loading method is reliable in the calculation.
Details
Keywords
Chengpeng Zhang, Zhihua Yu, Jimin Shi, Yu Li, Wenqiang Xu, Zheyi Guo, Hongshi Zhang, Zhongyuan Zhu and Sheng Qiang
Hexahedral meshing is one of the most important steps in performing an accurate simulation using the finite element analysis (FEA). However, the current hexahedral meshing method…
Abstract
Purpose
Hexahedral meshing is one of the most important steps in performing an accurate simulation using the finite element analysis (FEA). However, the current hexahedral meshing method in the industry is a nonautomatic and inefficient method, i.e. manually decomposing the model into suitable blocks and obtaining the hexahedral mesh from these blocks by mapping or sweeping algorithms. The purpose of this paper is to propose an almost automatic decomposition algorithm based on the 3D frame field and model features to replace the traditional time-consuming and laborious manual decomposition method.
Design/methodology/approach
The proposed algorithm is based on the 3D frame field and features, where features are used to construct feature-cutting surfaces and the 3D frame field is used to construct singular-cutting surfaces. The feature-cutting surfaces constructed from concave features first reduce the complexity of the model and decompose it into some coarse blocks. Then, an improved 3D frame field algorithm is performed on these coarse blocks to extract the singular structure and construct singular-cutting surfaces to further decompose the coarse blocks. In most modeling examples, the proposed algorithm uses both types of cutting surfaces to decompose models fully automatically. In a few examples with special requirements for hexahedral meshes, the algorithm requires manual input of some user-defined cutting surfaces and constructs different singular-cutting surfaces to ensure the effectiveness of the decomposition.
Findings
Benefiting from the feature decomposition and the 3D frame field algorithm, the output blocks of the proposed algorithm have no inner singular structure and are suitable for the mapping or sweeping algorithm. The introduction of internal constraints makes 3D frame field generation more robust in this paper, and it can automatically correct some invalid 3–5 singular structures. In a few examples with special requirements, the proposed algorithm successfully generates valid blocks even though the singular structure of the model is modified by user-defined cutting surfaces.
Originality/value
The proposed algorithm takes the advantage of feature decomposition and the 3D frame field to generate suitable blocks for a mapping or sweeping algorithm, which saves a lot of simulation time and requires less experience. The user-defined cutting surfaces enable the creation of special hexahedral meshes, which was difficult with previous algorithms. An improved 3D frame field generation method is proposed to correct some invalid singular structures and improve the robustness of the previous methods.
Details
Keywords
J. Faleiro, S. Oller and A.H. Barbat
The purpose of this paper is to develop an improved analytical model for predicting the damage response of multi‐storey reinforced concrete frames modelled as an elastic…
Abstract
Purpose
The purpose of this paper is to develop an improved analytical model for predicting the damage response of multi‐storey reinforced concrete frames modelled as an elastic beam‐column with two inelastic hinges at its ends.
Design/methodology/approach
The damage is evaluated in the hinges, using the concentrated damage concepts and a new member damage evaluation method for frame members, which leads to a meaningful global damage index of the structure. A numerical procedure for predicting the damage indices of the structures using matrix structural analysis, plastic theory and continuum damage model is also developed. The method is adequate for the prediction of the failure mechanisms.
Findings
Using the proposed framework numerical examples are finally included. From the obtained results, the advantages and limitation of the proposed model are observed.
Originality/value
The numeric model presented is useful to solve multi‐storey reinforced concrete frames using an inexpensive procedure that combines structural finite elements (beams) of low execution cost, with the moment‐curvature constitutive models deriving from classic stress‐strain ones. The proposed techniques give an inexpensive and reliability procedure to model the frame structures.
Details
Keywords
J. Noorzaei, M.N. Viladkar and P.N. Godbole
Study of soil‐structure interaction effect in framed structuresnecessitates proper physical modelling of the structure, foundation and thesoil mass. At the same time, the…
Abstract
Study of soil‐structure interaction effect in framed structures necessitates proper physical modelling of the structure, foundation and the soil mass. At the same time, the stress—strain model used for the constitutive relationship of the soil mass must also be realistic. In the present study, a hyperbolic stress—strain model has been used to consider the soil non‐linearity. The interactive behaviour of a five storey, two bay plane frame has been studied in detail and the results are compared with those obtained from a conventional and a linear interactive analysis.
Details
Keywords
Damage detection of frame structures is important for guaranteeing the safety of people’s lives and property. Sensitivity analysis is an effective method for damage…
Abstract
Purpose
Damage detection of frame structures is important for guaranteeing the safety of people’s lives and property. Sensitivity analysis is an effective method for damage identification. The purpose of this paper is to conduct a sensitivity analysis of beam–column joint rotation angles for frame structures with limited flexural stiffness beams.
Design/methodology/approach
First, based on the D-value method and the assumption of inflection points, statically indeterminate frames were transformed to statically determinate structures, and the expressions of beam–column joint rotation angles were derived. Next, the sensitivity coefficients of beam–column joint rotation angles were obtained by taking the derivative of the expressions of beam–column joint rotation angles with respect to the linear stiffness of column. Finally, the expressions of the sensitivity coefficients were verified by a numerical example.
Findings
The analytical solutions of the sensitivity coefficients are in good agreement with finite element results. The results show that the beam–column joint rotation angles of damaged column decrease and those of intact columns within the same story increase when damage occurs.
Originality/value
In this study, the sensitivity coefficients of beam–column joint rotation angles with respect to the linear stiffnesses of columns were derived for frame structures. Based on the result of the sensitivity analysis, the relationship between the changes of beam–column joint rotation angles and damaged columns is revealed. The findings provide an important base to further detect damage of frame structures.
Details
Keywords
Guiyun Xia, Wenya Shu and Ilinca Stanciulescu
This paper aims to propose an efficient method to conduct the preliminary analyses of medium or high-rise wall-frame structural systems with vertically varying properties. To this…
Abstract
Purpose
This paper aims to propose an efficient method to conduct the preliminary analyses of medium or high-rise wall-frame structural systems with vertically varying properties. To this end, a finite element is formulated to take the shear deformation of the shear wall and the constrained moment of the link beam.
Design/methodology/approach
The differential equation of the structure is derived from the total potential energy. Its homogenous solutions are functions of initial parameters (deflections and inner forces). To solve the structure with vertically non-uniform properties, the authors first use the classical Timoshenko beam element and then heuristically propose a finite element that uses the initial parameter solutions as shape functions and is easier to implement. A post-processing method to compute the shear force in the frame and shear wall is developed. Modal analysis using the consistent mass matrix is also incorporated. Numerical examples demonstrate the accuracy and mesh independency of the proposed element.
Findings
The shear deformation of the shear wall and the constrained moment of the link beam significantly influence the static response of the structure. Taking into account the shear deformation can eliminate the misleading result of zero-base shear force of the frame and give much better predictions of the system natural frequencies.
Originality/value
The proposed method achieves higher accuracy than the classical approach most often used. The finite element formulation derived from transformations of the initial parameter solutions is simple and has superior numerical performance. The post-processing method allows for a fast determination of the shear force distributions in the shear wall and frame.
Details
Keywords
Guochang Lin, Chaonan Hu, Lin Cong and Yongtao Yao
The purpose of this paper is to developing a kind of acoustic metamaterial with wide frequency band especially in low frequency region. At the same time, its the tunability of…
Abstract
Purpose
The purpose of this paper is to developing a kind of acoustic metamaterial with wide frequency band especially in low frequency region. At the same time, its the tunability of sound insulation frequency is achieved.
Design/methodology/approach
A three-dimensional (3D) acoustic metamaterial consisting of rigid frame, spherical attachment and thin film is proposed. The material parameters and the effect of the attachment hole on the forbidden band are investigated by finite element simulation. The sound insulation effect of the structure is validated by the combination of simulation and experiment.
Findings
The results show that the elastic modulus of the structural material determines the initial frequency of the forbidden band of the proposed 3D acoustic metamaterials. The lower the elastic modulus of the structural material, the lower the initial frequency of the forbidden band. The material parameters of the frame mainly affect the initial frequency of the first forbidden band, and the material parameters of the attachment will affect both the initial and termination frequency of the first forbidden band. Holes in the attachments reduce the band gap width. The characteristic curve moves down with the increase of subtracted mass.
Research limitations/implications
The findings may greatly benefit the application of the acoustic metamaterials in the fields of sound insulation and noise reduction.
Originality/value
This acoustic metamaterial structure has excellent sound insulation performance. At the same time, the single cell structure can be assembled into any shape. The structure can achieve sound selective filtering and combination control.
Details
Keywords
Parthasarathi N., Satyanarayanan K.S., Prakash M. and Thamilarasu V.
Progressive collapse because of high temperatures arising from an explosion, vehicle impact or fire is an important issue for structural failure in high-rise buildings.
Abstract
Purpose
Progressive collapse because of high temperatures arising from an explosion, vehicle impact or fire is an important issue for structural failure in high-rise buildings.
Design/methodology/approach
The present study, using ABAQUS software for the analysis, investigated the progressive collapse of a two-dimensional, three-bay, four-storey steel frame structure from high-temperature stresses.
Findings
After structure reaches the temperature results like displacement, stress axial load and shear force are discussed.
Research limitations/implications
Different temperatures were applied to the columns at different heights of a structure framed with various materials. Progressive collapse load combinations were also applied as per general service administration guidelines.
Originality/value
This study covered both steady-state and transient-state conditions of a multistorey-frame building subjected to a rise in temperature in the corner columns and intermediate columns. The columns in the framed structure were subjected to high temperatures at different heights, and the resulting displacements, stresses and axial loads were obtained, analysed and discussed.
Details