Search results

The purpose of this paper is to present a new method for determining the input parameters of the concrete damaged plasticity (CDP) model of ABAQUS standard software. The existing available methods in the literatures are case sensitive, i.e., they give different input parameters of CDP for a unique concrete class used in different finite element (FE) simulation of concrete structures. In this study, the authors attempt to introduce a new approach for the identification of the input parameters of the CDP model, which guarantees the uniqueness and precision of the model. In other words, by this method, the input parameters obtained for a specific concrete class with a unique characteristic strength can be used for FE simulation of the different concrete structures which were constructed by this concrete without the need to additional modifications raised from any new application.

For the input parameter identification of the CDP model, different standard tests of plain concrete are simulated by the ABAQUS standard software. These test simulations are performed for various set of input parameters. In the end, those set of input parameters which represents the best curve fitting with the experimental results is chosen as the optimum parameters.

By comparison of the FE simulation results obtained from the ABAQUS for two different concrete structures using the proposed input parameters for the CDP model with the experimental results, it was shown that the presented method for determining those parameters can guarantee the uniqueness and precision of the CDP model in simulation.

The method described for determining the input parameters of the CDP model of the ABAQUS standard software has not been previously presented.

This paper aims to model the performances of frames structures by comparing the predictions of ordinary control concrete (CC) and concretes reinforced by fibers. Two types of steel fibers were used in this work, industrial steel fibers (ISF) and tire-reclaimed fibers obtained by cutting virgin steel tire-cord to 50 mm, noticed virgin steel fibers (VSF). In total, 3% of VSF are used. The results obtained in this paper clearly show the contribution of fibers in improving the global and local behavior of the frames structures. VSF gives the same or better overall behavior as the use of industrial fibers for the same percentage of fibers, with the advantage that VSF contributes to the protection of the environment and limit the wastage of steel.

This work was carried out using the commercial finite element code Abaqus/Explicit. The behavior of the different concretes used in this study was modeled by the concrete damage plasticity (CDP) constitutive law. The methodology adopted to complete this work consisted in identifying, by calibration of the available experimental results with the numerical predictions, the parameters of the corresponding CDP model for each of the concretes used in this work. To this end, the authors have successively identified the CDP parameters for the CC-V (control concrete used by Vecchio and Emara, 1992) used in frame structure (R + 1). Subsequently, the CDP parameters of the CC-T (control concrete used by Tlemat, 2004), the CVSF (concrete with virgin steel fibers) and the CISF-1 (concrete with industrial steel fibers type 1, ISF-1) are identified using the experimental results of beams under bending tests. Once the model parameters were determined for each concrete, the authors conducted a series of simulations to show the benefit of introducing claimed and industrial fibers in frame structure (R + 1) and (R + 2). This approach recommends the use of concrete reinforced with steel fibers, mainly 6% by mass of VSF and ISF-1, in place of ordinary concrete in new construction to increase the resistance of structures and contribute, if applicable, to the protection of the environment.

The main findings of this study can be summarized by: the strength and ductility of the frames structures made of concrete fiber are significantly increased. The use of tire-reclaimed steel fibers (VSF) gives the same or better overall behavior as the use of industrial fibers. In addition to their good mechanical contribution, the tire-reclaimed fibers contribute to the protection of the environment and limit the wastage of steel. The use of fibers reduces the cracking zones in concrete fiber frames structures. The usefulness of distinguishing the interstory displacement limits set by codes, in particular, uniform building code (UBC-97), for ordinary concretes and concrete reinforced with fibers is addressed.

The contribution of tire-reclaimed and industrial fibers on the strength and ductility of reinforced concrete-frames structures is addressed. The use of tire-reclaimed steel fibers gives the same or better overall behavior as the use of industrial fibers, the tire-reclaimed fibers having the advantage of contributing to the protection of the environment and limiting the wastage of steel. The paper also points to the usefulness of distinguishing the interstory displacement limits set by codes, in particular UBC-97, for ordinary concrete and concrete reinforced with fibers, in accordance to the predictions of the capacity curves.

The purpose of this paper is to investigate the mechanical properties’ behaviors of woven composite cut-out structures with specific parameters. Because of the complexity of micro-scale and meso-scale structure, it is difficult to accurately predict the mechanical material behavior of woven composites. Numerical simulations are increasingly necessary for the design and optimization of test procedures for composite structures made by the woven composite. The results of the proposed method are well satisfied with the results obtained from the experiment and other studies. Moreover, parametric studies on different plates based on the stacking sequences are investigated.

A multi-scale modeling approach is suggested. Back-propagation neural networks (BPNN), radial basis function (RBF) and least square support vector regression are integrated with efficient global optimization (EGO) to reduce the weight of assigned structure. Optimization results are verified by finite element analysis.

Compared with other similar studies, the advantage of the suggested strategy uses homogenized properties behaviors with more complex analysis of woven composite structures. According to investigation results, it can be found that 450/−450 ply-orientation is the best buckling load value for all the cut-out shape requirements. According to the optimal results, the BPNN-EGO is the best candidate for the EGO to optimize the woven composite structures.

A multi-scale approach is used to investigate the mechanical properties of a complex woven composite material architecture. Buckling of different cut-out shapes with the same area is surveyed. According to investigation, 45°/−45° ply-orientation is the best for all cut-out shapes. Different surrogate models are integrated in EGO for optimization. The BPNN surrogate model is the best choice for EGO to optimization difficult problems of woven composite materials.

This paper aims to apply a pavement design by LEDFAA for a sample airport, and design results involving layer thickness, modulus and cumulative damage factor (CDF) achieved are shown in figures.

Finite element (FE) simulation is applied for sample airport pavement and based on results involving stress and strain, CDF amount is shown by using related equations. To analyze the accuracy of modeling, a comparison has been made between the values of ABAQUS and case study results at Denver International Airport (DIA).

The present study includes a comparison between the two conventional methods for runway pavement design. There is linear relation between layered elastic design (LED) and FE method results, so CDF rate achieved by the FE method is always smaller than the LED method. To assess the accuracy of the applied modeling with ABAQUS software, the validation was done using the deformations under the concrete slabs of DIA. The results are compatible with the results acquired from the case study, and the high accuracy of modeling was approved. This research shows that B-777 on rigid pavements and A-340-500/600 on flexible pavements have the most CDF contribution, among other aircrafts. Also, CDF rate for any aircraft in the LED method is higher than the FE method.

To assess the accuracy of the applied modeling with ABAQUS software, the validation was done using the deformations under the concrete slabs of DIA. The results are compatible with the results acquired from the case study, and the high accuracy of modeling was approved.

The purpose of this paper is to investigate and to assess the capabilities of the most common finite element (FE)‐based tools to deal with global‐local analysis. Two kinds of coupling were investigated: shell to shell and shell to solid.

The issue of connecting non‐matching FE global and local models, characterized by different mesh refinements and/or different element types, was addressed by introducing appropriate kinematic constraints on the nodes at the interfaces. The coupling techniques available in the three FE‐based codes (ABAQUS^®, NASTRAN^® and ANSYS^®), were assessed by applying them on a common numerical test case (non‐linear buckling analysis of a square plate). Results of the global‐local simulations were compared to the results obtained for relevant reference solutions.

The continuity of displacements and stresses across the interface between global and local models and the influence of the presence of the local model on the global model solution were used as parameters to test the quality of the results. It was observed that the tools implemented in the different codes provide different results. The results characterized by a higher quality were found by using the Multi Point Constraint available in ABAQUS^®.

When dealing with complex structures, multi‐scale (global‐local) approaches are commonly adopted to optimize the computational cost by increasing mesh refinements and/or introducing elements with different formulations in specific region of the structures identified as “local model”. In this paper an overview of the coupling tools available in the main commercial FE code is given.

In former work, test results of cracks in aluminium panels under cyclic shear buckling showed that cracks in the tensile stress field of a buckle propagate. The main influencing factor for the crack growth rate is the maximum principle stress. A simplified approach for crack propagation analyses based on this finding showed limitations for application on larger cracks because it disregarded the increasing out-of-plane deformation for larger cracks as well as stress redistributions. The purpose of this paper is to improve the results of the simplified approach with the help of finite element method (FEM).

An approach for crack propagation based on FEM is presented taking into account the mutual interaction of cracks and buckling. The finite element (FE) model, which is described in detail, respects the boundary conditions of the test-set-up. Different initial crack positions, loads and panel thicknesses are analyzed. Results of the stress intensity factors KI calculated by the ABAQUS® FE model provide a function which is used to run a crack propagation analysis based on Forman law.

The results of the FE-based crack propagation solution are in good agreement with test results and improve the prediction of the simplified approach. It is not restricted in terms of panel thickness, crack position or applied shear load.

Limitations of the FE-based crack propagation solution compared to the experimental results are discussed. These are, the sensitivity of crack propagation analyses to initial crack length and deviations of the experimental settings from the ideal FE model.

The interaction of cracks and buckling in aluminium shells is mainly disregarded both in research and industrial work, but can be of interest considering, accidental damages in fuselage side shells. Cracks propagate under shear load as it was shown in former work. The FE modeling of the tests presented in this paper proves the mutual interactions of crack propagation and buckling deformation.

The trapped geothermal heat in the infinite rock mass through which mine tunnels are excavated is a great threat to the safety of personnel and mine operating equipment in deep underground hot mines. In order to lessen the temperature inside the tunnel a considerable amount of energy is being spent by the way of using ventilation and cooling systems to dissipate the heat. However, operational costs of the system rise quite considerably, especially as the mines get deeper. Shotcrete is used both as a structural lining and as an effective insulation to reduce the heat load on the ventilation and cooling system within such tunnels. The paper aims to discuss these issues.

In order to analyse this problem of heat flow and thermal stresses and their time dependent pattern, several cylindrical models, in both analytical and numerical forms, are discussed and compared in this paper.

This study shows the validation of ABAQUS® software to predict the time dependent temperature and the thermal stresses in mine tunnels through the comparisons with the available analytical models. Further, thermal insulation effects of shotcrete are also evaluated with these theoretical models and it is found that all the models gave results in close agreements with one another.

Therefore, this study provides the theoretical proof for advantages in applying shotcrete as the thermal insulation layer in underground mines.

Light-Gauge Steel Frame (LSF) structures are popular in building construction due to their lightweight, easy erecting and constructability characteristics. However, due to steel lipped channel sections negative fire performance, cavity insulation materials are utilized in the LSF configuration to enhance its fire performance. The applicability of lightweight concrete filling as cavity insulation in LSF and its effect on the fire performance of LSF are investigated under realistic design fire exposure, and results are compared with standard fire exposure.

A Finite Element model (FEM) was developed to simulate the fire performance of Light Gauge Steel Frame (LSF) walls exposed to realistic design fires. The model was developed utilising Abaqus subroutine to incorporate temperature-dependent properties of the material based on the heating and cooling phases of the realistic design fire temperature. The developed model was validated with the available experimental results and incorporated into a parametric study to evaluate the fire performance of conventional LSF walls compared to LSF walls with lightweight concrete filling under standard and realistic fire exposures.

Novel FEM was developed incorporating temperature and phase (heating and cooling) dependent material properties in simulating the fire performance of structures exposed to realistic design fires. The validated FEM was utilised in the parametric study, and results exhibited that the LSF walls with lightweight concrete have shown better fire performance under insulation and load-bearing criteria in Eurocode parametric fire exposure. Foamed Concrete (FC) of 1,000 kg/m3 density showed best fire performance among lightweight concrete filling, followed by FC of 650 kg/m3 and Autoclaved Aerated Concrete (AAC) 600 kg/m3.

The developed FEM is capable of investigating the insulation and load-bearing fire ratings of LSF walls. However, with the availability of the elevated temperature mechanical properties of the LSF wall, materials developed model could be further extended to simulate the complete fire behaviour.

LSF structures are popular in building construction due to their lightweight, easy erecting and constructability characteristics. However, due to steel-lipped channel sections negative fire performance, cavity insulation materials are utilised in the LSF configuration to enhance its fire performance. The lightweight concrete filling in LSF is a novel idea that could be practically implemented in the construction, which would enhance both fire performance and the mechanical performance of LSF walls.

Limited studies have investigated the fire performance of structural elements exposed to realistic design fires. Numerical models developed in those studies have considered a similar approach as models developed to simulate standard fire exposure. However, due to the heating phase and the cooling phase of the realistic design fires, the numerical model should incorporate both temperature and phase (heating and cooling phase) dependent properties, which was incorporated in this study and validated with the experimental results. Further lightweight concrete filling in LSF is a novel technique in which fire performance was investigated in this study.

A three-dimensional finite element (FE) model is developed to design a vibrating bimorph piezoelectric cantilever beam with lead zirconate titanate (PZT-5H) for energy harvesting. The paper aims to discuss these issues.

A parametric study of electric power generated as a function of the dielectric constant, transverse piezoelectric strain constant, length and thickness of the piezoelectric material, is conducted for a time-harmonic surface pressure load. Transversely isotropic elastic and piezoelectric properties are assigned to the bimorph layers with brass chosen as the substrate material in the three-dimensional FE model. Using design of experiments, a study was conducted to determine the sensitivity of power with respect to the geometric and material variables.

The numerical analysis shows that a uniform decrease in thickness and length coverage of the piezoelectric layers results in a nonlinear reduction in power amplitude, which suggests optimal values. The piezoelectric strain coefficient, d31 and the thickness of PZT-5H, tp, are the most important design parameters to generate high electric energy for bimorph vibration harvesting device.

The work demonstrates that, through a sensitivity analysis, the electro-mechanical piezoelectric coupling coefficient (d31) and the thickness of the piezoelectric strips (tp) are the most important parameters which have a significant effect on power harvested.

The purpose of this paper is to present a practical and efficient iterative method for predicting vehicle-induced response of bridge.

The vehicle-bridge interaction (VBI) problem is generalized mathematically and a computational algorithm for VBI is proposed. This method rests on an iterative procedure, which utilizes the whole interaction process for iteration. By this means, vehicle and bridge become totally uncoupled and are only linked by the contact force history. This method provides flexibility to choose simplified or refined vehicle and bridge models for the VBI problem, as well as open options for different commercial FEM software without specialized codes.

The method is verified through two numerical examples. The first example uses a simple 1D beam bridge model, which illustrates the procedure of this method and demonstrates its fast convergence in several iterations. The second example employs a realistic full 3D finite element bridge model, which shows that the method easily connects complex FEM bridge models in ABAQUS with a calibrated vehicle model in Matlab. The dynamic response of the bridge is reliably calculated within only a few iterations.

The proposed iterative method separates vehicle and bridge into independent subsystems in the computational process, thus providing more flexibility to utilize commercial FEM softwares. Its efficiency is realized through choosing the whole interaction force process for iteration, which considerably reduces the iteration steps.