Search results

The external confinement provided by the fiber-reinforced polymer (FRP) sheets leads to an improvement in the axial compressive strength (CS) and strain of reinforced concrete structural members. Many studies have proposed analytical models to predict the axial CS of concrete structural members, but the predictions for the axial compressive strain still need more investigation because the previous strain models are not accurate enough. Moreover, the previous strain models were proposed using small and noisy databases using simple modeling techniques. Therefore, a rigorous approach is needed to propose a more accurate strain model and compare its predictions with the previous models.

The present work has endeavored to propose strain models for FRP-confined concrete members using three different techniques: analytical modeling, artificial neural network (ANN) modeling and finite element analysis (FEA) modeling based on a large database consisting of 570 sample points.

The assessment of the previous models using some statistical parameters revealed that the estimates of the newly recommended models were more accurate than the previous models. The estimates of the new models were validated using the experimental outcomes of compressive members confined with carbon-fiber-reinforced polymer (CFRP) wraps. The nonlinear FEA of the tested samples was performed using ABAQUS, and its estimates were equated with the calculations of the analytical and ANN models. The relative investigation of the estimates solidly substantiates the accuracy and applicability of the recommended analytical, ANN and FEA models for predicting the axial strain of CFRP-confined concrete compression members.

The research introduces innovative methods for understanding FRP confinement in concrete, presenting new models to estimate axial compressive strains. Utilizing a database of 570 experimental samples, the study employs ANNs and regression analysis to develop these models. Existing models for FRP-confined concrete's axial strains are also assessed using this database. Validation involves testing 18 cylindrical specimens confined with CFRP wraps and FE simulations using a concrete-damaged plastic (CDP) model. A comprehensive comparative analysis compares experimental results with estimates from ANNs, analytical and finite element models (FEMs), offering valuable insights and predictive tools for FRP confinement in concrete.

In order to improve the efficiency and reliability of simulation analysis for composite riveting structures in engineering products, a comparative study was conducted on different forms of riveting simulation methods.

Five different rivent simulation models were established using the finite element method, including rigid element CE, flexible element Rbe3 and beam element, and their results were future compared and analyzed.

Under the given technical parameters, the simulation method of Rbe3 (with holes) + beam can meet the analysis requirements of complex engineering products in terms of the rationality of rivet load distribution, calculation error and relatively efficient modeling.

This study proposes a simulation method for the riveting structure of carbon fiber composite materials for engineering applications. This method can satisfy the simulation analysis requirements of transportation vehicles in terms of modeling time, computational efficiency and accuracy. The research can provide technical support for the riveting process and mechanical analysis between carbon fiber composite components in transportation products.

Heterogeneous and micro-structured materials have been the object of multiscale and homogenization techniques aimed at recognizing the elastic properties of the equivalent continuum. The proposed investigation deals with the mechanical characterization of the heterogeneous material structured metamaterials through analyzing the ultimate strength using the limit analysis of the Representative Volume Element (RVE). To get the desired material strength, a novel finite element formulation based on the derivation of self-equilibrated solutions through the finite elements devoted to calculating the lower bound theorem has been implemented together with the limit analysis in Melàn’s formulation.

The finite element formulation is based on discrete mapping of Volterra dislocations in the structure using isoparametric representation. Using standard finite element techniques, the linear operator V, which relates the self-equilibrated internal solicitation to displacement-like nodal parameters, has been built through finite element discretization of displacement and strain.

The proposed work presented an elastic homogenization of the mechanical properties of an elementary cell with a geometry known in the literature, the isotropic truss. The matrix of elastic constants was calculated by subjecting the RVE to numerical load tests, simulated with a commercial FEM calculation code. This step showed the dependence of the isotropy properties, verified with Zener theory, on the density of the RVE. The isotropy condition of the material is only achieved for certain section ratios between body-centered cubic (BCC) and face-centered cubic (FCC), neglecting flexural effects at the nodes. The density that satisfies Zener’s conditions represents the isotropic geomatics of the isotropic truss.

For the isotropic case, the VFEM procedure was used to evaluate the isotropy of the limit domain and was compared with the Mises–Schleicher limit domain. The evaluation of residual ductility and dissipation energy allowed a measurement parameter for the limit anisotropy to be defined. The novelty of the proposal consisted in the formulation of both the linearized and the nonlinear limit locus of the material; hence, it furnished the starting point for further limit analysis of the structures whose elementary volume has been described through the proposed approach.

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

The purpose of this study is to investigate the strain rate effect on the problem of low-velocity impact (LVI) on a beam, including silicon nitride and stainless steel materials.

Based on the nonlinear Hertz impact mechanism, the energies related to the impactor and the beam are written, and motion equations are derived using the Lagrangian mechanics and Ritz method. The strain rate term is represented as a damping matrix in the equations of motion. In the issue of LVI on the silicon nitride and stainless steel beam, the effect of internal viscous damping coefficient in simply–simply and clamped–free boundary conditions are studied. Also, the influence of the volume fraction index in the range between zero and one and greater than one on the impact response is investigated.

The results make it clear that the strain rate parameter had little effect on the response in LVI. Also, an increase in the volume fraction index has led to a decrease in the contact force and an increase in the rebound velocity of the impactor.

The effect of strain rate on LVI is theoretically studied in this paper, while in most of the papers, this effect is investigated experimentally and numerically.

The purpose of this study is to numerically model the rigid pavement resting on Pasternak soil and to examine its various response parameters and stress resultants like deflection, rotation, bending moment and shear force when subjected to aircraft loading.

The study is carried out using a one-dimensional (1D) beam element based on the finite element method (FEM). Each node in this element has three rotational and three translational degrees of freedom (DOF). MATLAB programming is used to perform the static analysis of rigid pavement.

Response parameters and stress resultants of the rigid pavement were determined. The FEM used in this work is validated by two closed-form numerical examples, which are in great accord with previous research findings with a maximum divergence of 4.64%, therefore verifying the finite element approach used in the current study. Additionally, various parametric studies have been carried out to study the variations in response parameters and stress resultants.

The investigation at hand focuses exclusively on the static analysis of the pavement. The study constraints pertaining to the preliminary design phase of rigid pavements are such that a comprehensive three-dimensional finite element analysis is deemed unnecessary.

As limited previous research had performed the static analysis of rigid pavement on Pasternak foundation with 6 DOF. Furthermore, no prior study has done seven separate parametric investigations on the static analysis of rigid pavement.

Evaluate the performance of progressive collapse of full-scale three-dimensional structure (3D) beam-slab substructures with and without the presence of reinforced concrete (RC) balconies using two concrete mixes [normal concrete (NC) and rubberized concrete (RuC)].

This study examines two concrete mixes to evaluate the progressive collapse performance of full-scale 3D beam-slab substructures with and without the presence of RC balconies using the finite element (FE) method.

The results showed that the vertical loads that affect the structures of the specimens after including the balconies in the modeling increased by an average of 29.3% compared with those of the specimens without balconies. The specimens with balconies exhibited higher resistance to progressive collapse in comparison with the specimens without balconies. Moreover, the RuC specimens performed very efficiently during the catenary stage, which significantly enhanced robustness to substantial deformation to delay or mitigate the progressive collapse risk.

All the experimental and numerical studies of the RC beam-slab substructures under progressive collapse scenarios are limited and do not consider the balcony’s presence in the building. Although balconies represent a common feature of multistory residential buildings, their presence in the building has more likely caused the failure of this building compared with a building without balconies. However, balconies are an external extension of RC slabs, which can provide extra resistance through tensile membrane action (TMA) or compressive membrane action (CMA). All those gaps have not been investigated yet.

This study aims to integrate design methods and additive manufacturing with the use of a thermoplastic elastomer certified for medical use and reverse engineering towards a new concept of a customized buttress model with optimized features for the reconstruction of the osteo-dural opening after endoscopic endonasal transtuberculum-transplanum approach.

Additive manufacturing allows making of cost-effective and useable devices with tailored properties for biomedical applications. The endoscopic endonasal approach to the suprasellar area enables the management of different intradural tumours, and the craniectomy at the skull base is generally wide and irregular. Defining an optimal strategy for osteodural defect closure at the preoperative stage represents a significant challenge.

Using the results obtained from a computed tomography analysis, skull base defects were designed to plan the surgical approach. Several concepts of customized buttress models were first built up, initially focusing on thin, flexible edges characterized by different thicknesses. Finite element analyses and design optimization allowed us to achieve the optimal design solution with improved compliance/flexibility for easy intranasal manoeuvrability, maintaining an adequate mechanical stability. As the thickness of the edges decreased, an increase of strain energy values was found (i.e. 1.2 mJ – Model A, 1.7 mJ – Model B, 2.3 mJ – Model C, 4.3 mJ – Model D). However, a further optimization (Model E) led to a significant increase of the compliance (strain energy of 14.1 mJ).

The results obtained from clinical evaluations demonstrated the feasibility of the proposed technical solutions, improving surgery effectiveness.

This research paper aims to investigate reinforced concrete (RC) walls' behaviour under fire and identify the thermal and mechanical factors that affect their performance.

A three-dimensional (3D) finite element (FE) model is developed to predict the response of RC walls under fire and is validated through experimental tests on RC wall specimens subjected to fire conditions. The numerical model incorporates temperature-dependent properties of the constituent materials. Moreover, the validated model was used in a parametric study to inspect the effect of the fire scenario, reinforcement concrete cover, reinforcement ratio and configuration, and wall thickness on the thermal and structural behaviour of the walls subjected to fire.

The developed 3D FE model successfully predicted the response of experimentally tested RC walls under fire conditions. Results showed that the fire resistance of the walls was highly compromised under hydrocarbon fire. In addition, the minimum wall thickness specified by EC2 may not be sufficient to achieve the desired fire resistance under considered fire scenarios.

There is limited research on the performance of RC walls exposed to fire scenarios. The study contributed to the current state-of-the-art research on the behaviour of RC walls of different concrete types exposed to fire loading, and it also identified the factors affecting the fire resistance of RC walls. This guides the consideration and optimisation of design parameters to improve RC walls performance in the event of a fire.

Basically, connections are used to transfer the force supported by structural members to other parts of the structure. The flush end-plate bolted beam to column connection is one type that has been widely used because of its simplicity in fabrication and rapid site erection. The purpose of this study is to determine the moment-rotation curve, moment of resistance (MR) and mode of failure, and the results were compared with existing results for normal flat web connections.

In this study, the connection modeled was the flush end-plate welded with triangular web profile (TriWP) steel beam section and then bolted to a UKC column flange. The bolted flush end-plate semi-rigid beam to column connection was modeled using finite element software. The specimen was modeled using LUSAS 14.3 finite element software, with dimensions and parameters of the finite element model sizes being 200 × 200 × 49.9 UKC, 200 × 100 × 17.8 UKB and 200 × 100 with a thickness of 20 mm for the endplate.

It can be concluded that the MR obtained from the TriWP steel beam section is different from that of the normal flat web steel beam by 28%. The value of MR for the TriWP beam section is lower than that of the normal flat web beam section, but the moment ultimate is higher by 21% than the normal flat web. Therefore, it can be concluded that the TriWP section can resist more acting force than the normal flat web section and is suitable to be used as a new proposed shape to replace the normal flat web section for a certain steel structure based on the end-plate connection behavior.

As a result, the TriWP section has better performance than the flat web section in resisting MR behavior.