Search results

This paper aims to develop an efficient algorithm combining straightforward response surface functions with Monte Carlo simulation to conduct seismic reliability analysis in a systematical way.

The representative slip surfaces are identified and based on to calibrate multiple response surface functions with acceptable accuracy. The calibrated response surfaces are used to determine the yield acceleration in Newmark sliding displacement analysis. Then, the displacement-based limit state function is adopted to conduct seismic reliability analysis.

The calibrated response surface functions have fairly good accuracy in predicting the yield acceleration in Newmark sliding displacement analysis. The seismic reliability is influenced by such factors as PGA, spatial variability and threshold value. The proposed methodology serves as an effective tool for geotechnical practitioners.

The multiple sources of a seismic slope response can be effectively determined using the multiple response surface functions, which are easily implemented within geotechnical engineering.

The authors propose to estimate a varying coefficient panel data model with different smoothing variables and fixed effects using a two-step approach. The pilot step estimates the varying coefficients by a series method. We then use the pilot estimates to perform a one-step backfitting through local linear kernel smoothing, which is shown to be oracle efficient in the sense of being asymptotically equivalent to the estimate knowing the other components of the varying coefficients. In both steps, the authors remove the fixed effects through properly constructed weights. The authors obtain the asymptotic properties of both the pilot and efficient estimators. The Monte Carlo simulations show that the proposed estimator performs well. The authors illustrate their applicability by estimating a varying coefficient production frontier using a panel data, without assuming distributions of the efficiency and error terms.

This study examines the importance of exchange rate and credit growth fluctuations when designing monetary policy in Thailand. To this end, the authors construct a small open economy New Keynesian dynamic stochastic general equilibrium (DSGE) model. The model encompasses several essential characteristics, including incomplete financial markets, incomplete exchange rate pass-through, deviations from the law of one price and a banking sector. The authors consider generalized Taylor rules, in which policymakers adjust policy rates in response to output, inflation, credit growth and exchange rate fluctuations. The marginal likelihoods are then employed to investigate whether the central bank responds to fluctuations in the exchange rate and credit growth.

This study constructs a small open economy DSGE model and then estimates the model using Bayesian methods.

The authors demonstrate that the monetary authority does target exchange rates, whereas there is no evidence in favor of incorporating credit growth into the policy rules. These findings survive various robustness checks. Furthermore, the authors demonstrate that domestic shocks contribute significantly to domestic business cycles. Although the terms of trade shock plays a minor role in business cycles, it explains the most significant proportion of exchange rate fluctuations, followed by the country risk premium shock.

This study is the first attempt at exploring the relevance of exchange rate and credit growth fluctuations when designing monetary policy in Thailand.

From the buying club’s perspective, the transfer of a player can be interpreted as an investment from which the club expects uncertain future benefits. This paper aims to develop a decision-oriented approach for the valuation of football players that could theoretically help clubs determine the subjective value of investing in a player to assess its potential economic advantage.

We build on a semi-investment-theoretical risk-value model and elaborate an approach that can be applied in imperfect markets under uncertainty. Furthermore, we illustrate the valuation process with a numerical example based on fictitious data. Due to this explicitly intended decision support, our approach differs fundamentally from a large part of the literature, which is empirically based and attempts to explain observable figures through various influencing factors.

We propose a semi-investment-theoretical valuation approach that is based on a two-step model, namely, a first valuation at the club level and a final calculation to determine the decision value for an individual player. In contrast to the previous literature, we do not rely on an econometric framework that attempts to explain observable past variables but rather present a general, forward-looking decision model that can support managers in their investment decisions.

This approach is the first to show managers how to make an economically rational investment decision by determining the maximum payable price. Nevertheless, there is no normative requirement for the decision-maker. The club will obviously have to supplement the calculus with nonfinancial objectives. Overall, our paper can constitute a first step toward decision-oriented player valuation and for theoretical comparison with practical investment decisions in football clubs, which obviously take into account other specific sports team decisions.

This paper introduces a novel quality measure, the percent-within-distribution, or PWD, for acceptance and payment in a quality control/quality assurance (QC/QA) performance specification (PS).

The new quality measure takes any sample size or distribution and uses a Bayesian updating process to re-estimate parameters of a design distribution as sample observations are fed through the algorithm. This methodology can be employed in a wide range of applications, but the authors demonstrate the use of the measure for a QC/QA PS with upper and lower bounds on 28-day compressive strength of in-place concrete for bridge decks.

The authors demonstrate the use of this new quality measure to illustrate how it addresses the shortcomings of the percent-within-limits (PWL), which is the current industry standard quality measure. The authors then use the PWD to develop initial pay factors through simulation regimes. The PWD is shown to function better than the PWL with realistic sample lots simulated to represent a variety of industry responses to a new QC/QA PS.

The analytical contribution of this work is the introduction of the new quality measure. However, the practical and managerial contributions of this work are of equal significance.

The author develops a bilateral Nash bargaining model under value uncertainty and private/asymmetric information, combining ideas from axiomatic and strategic bargaining theory. The solution to the model leads organically to a two-tier stochastic frontier (2TSF) setup with intra-error dependence. The author presents two different statistical specifications to estimate the model, one that accounts for regressor endogeneity using copulas, the other able to identify separately the bargaining power from the private information effects at the individual level. An empirical application using a matched employer–employee data set (MEEDS) from Zambia and a second using another one from Ghana showcase the applied potential of the approach.

Uncertainty in data, whether in real-valued or integer-valued data, may result in infeasible optimal solutions or unreliable efficiency scores and ranking of decision-making units. To handle the uncertainty in integer-valued factors in data envelopment analysis (DEA) models, this study aims to propose a robust DEA model which is applicable in the presence of such factors.

This research focuses on the application of fuzzy interpretation of efficiency to a mixed-integer DEA (MIDEA) model. The robust optimization approach is used to address the uncertain integer-valued parameters in the proposed MIDEA model.

In this study, the authors proposed an MIDEA model without any equality constraint to avoid the arise problem by such constraints in the construction of the robust counterpart of the conventional MIDEA models. We have studied the characteristics and conditions for constructing the uncertainty set with uncertain integer-valued parameters and a robust MIDEA model is proposed under a combined box-polyhedral uncertainty set. The applicability of the developed models is shown in a case study of Malaysian public universities.

This study develops an MIDEA model equivalent to the conventional MIDEA model excluding any equality constraint which is crucial in robust approach to avoid restricted feasible region or infeasible solutions. This study proposes a robust DEA approach which is applicable in cases with uncertain integer-valued parameters, unlike previous studies in robust DEA field where uncertain parameters are generally assumed to be only real-valued.

To improve the position tracking efficiency of the upper-limb rehabilitation robot for stroke hemiplegia patients, the optimization Learning rate of the membership function based on the fuzzy impedance controller of the rehabilitation robot is propose.

First, the impaired limb’s damping and stiffness parameters for evaluating its physical recovery condition are online estimated by using weighted least squares method based on recursive algorithm. Second, the fuzzy impedance control with the rule has been designed with the optimal impedance parameters. Finally, the membership function learning rate online optimization strategy based on Takagi-Sugeno (TS) fuzzy impedance model was proposed to improve the position tracking speed of fuzzy impedance control.

This method provides a solution for improving the membership function learning rate of the fuzzy impedance controller of the upper limb rehabilitation robot. Compared with traditional TS fuzzy impedance controller in position control, the improved TS fuzzy impedance controller has reduced the overshoot stability time by 0.025 s, and the position error caused by simulating the thrust interference of the impaired limb has been reduced by 8.4%. This fact is verified by simulation and test.

The TS fuzzy impedance controller based on membership function online optimization learning strategy can effectively optimize control parameters and improve the position tracking speed of upper limb rehabilitation robots. This controller improves the auxiliary rehabilitation efficiency of the upper limb rehabilitation robot and ensures the stability of auxiliary rehabilitation training.

This study aims to propose a more precise method for robust design optimization of mechanical structures with black-box problems, while also considering the efficiency of uncertainty analysis.

The method first introduces a dual adaptive chaotic flower pollination algorithm (DACFPA) to overcome the shortcomings of the original flower pollination algorithm (FPA), such as its susceptibility to poor accuracy and convergence efficiency when dealing with complex optimization problems. Furthermore, a DACFPA-Kriging model is developed by optimizing the relevant parameter of Kriging model via DACFPA. Finally, the dual Kriging model is constructed to improve the efficiency of uncertainty analysis, and a robust design optimization method based on DACFPA-Dual-Kriging is proposed.

The DACFPA outperforms the FPA, particle swarm optimization and gray wolf optimization algorithms in terms of solution accuracy, convergence speed and capacity to avoid local optimal solutions. Additionally, the DACFPA-Kriging model exhibits superior prediction accuracy and robustness contrasted with the original Kriging and FPA-Kriging. The proposed method for robust design optimization based on DACFPA-Dual-Kriging is applied to the motor hanger of the electric multiple units as an engineering case study, and the results confirm a significant reduction in the fluctuation of the maximum equivalent stress.

This study represents the initial attempt to enhance the prediction accuracy of the Kriging model using the improved FPA and to combine the dual Kriging model for uncertainty analysis, providing an idea for the robust optimization design of mechanical structure with black-box problem.

This paper aims to study the impact of tax avoidance on corporate risk. It also examines the moderating impact of tax risk on the relationship between tax avoidance and firm risk.

Based on available information in the DATASTREAM database about a sample of French firms listed in the CAC 40 from 2010 to 2022, the study uses the feasible generalized least squares method to investigate the impact of tax avoidance on firm risk and the moderating impact of tax risk. To check the robustness of our results, the authors changed the measurement of variables to identify potential biases and they significantly mitigated the endogeneity concerns using instrumental variable regression. Additional estimations were performed, first by using book-tax differences (BTD) and its components, i.e. temporary and permanent, and second by retesting hypotheses of years before the outbreak of the corona virus disease 2019 (COVID-19) pandemic.

The results show that tax avoidance negatively affects the firm risk while tax risk has a positive effect on firm risk. More importantly, tax risk moderates the negative impact of tax avoidance on the firm risk. When tax avoidance is associated with a high level of tax risk, it leads to a high firm risk. Accordingly, tax avoidance should be considered in conjunction with tax risk when studying the effect put on the firm risk. Further analyses indicate that tax risk moderates the negative relationship between permanent BTD and firm risk.

The major limitation of this study is that it focuses only on French-listed firms, which make it difficult to generalize the results. Furthermore, the authors did not introduce governance variables into our models. An effective governance system and transparent information can reduce some of the perverse effects of risky tax avoidance by reducing the tax avoidance costs. The obtained results are of great interest to researchers who need to include the tax risk concept in their examination of the tax avoidance impacts.

The results are useful for investors wishing to make sound decisions regarding risky tax avoidance practices. Furthermore, the results may signal the need for French policymakers to make more efforts to reduce risky tax avoidance activities that are harmful to investors. They must enforce the existence and the reporting of a tax risk management strategy by firms.

This study contributes to the growing body of literature on the tax avoidance effects with a special focus on firm risk. This study provides the first French evidence of the role of tax risk in the relationship between tax avoidance and firm risk.