Search results

The purpose of this paper is to develop and implement a structural fatigue life estimation framework that includes laser‐peened (LP) residual stresses and then experimentally validates these fatigue life estimations.

A three‐dimensional finite element analysis of an Al 7075‐O three‐point bending coupon being LP was created and used to estimate the fatigue life when loaded. Fatigue tests were conducted to validate these estimations.

The framework developed for fatigue life estimation of LP‐processed coupons yielded estimates with goodness‐of‐fit between the log‐transformed experimental and analytical data of R²=0.97 for the baseline coupons and R²=0.94 for the LP‐processed coupons.

Approximated ε‐life fatigue parameters were used to calculate the fatigue life resulting from the complex residual stress fields due to the simulated LP process.

A fatigue life estimation framework that considers LP residual stress fields has been developed for use on structural components.

The purpose of this study is to address the complexity involved in computing the fatigue life of casted structure with porosity effects in aero engine applications. The uncertainty of porosity defects is addressed by introducing probabilistic models.

One major issue of casted aluminium alloys in the application of aerospace industries is their internal defects such as porosities, which are directly affecting the fatigue life. Since there is huge cost and time effort involved in understanding the effect of fatigue life in terms of the presence of the internal defects, a probabilistic fatigue model approach is applied in order to define the realistic fatigue limit of the casted structures for the known porosity fractions. This paper describes the probabilistic technique to casted structures with measured porosity fractions and its relation to their fatigue life. The predicted fatigue life for various porosity fractions and dendrite arm spacing values is very well matching with the experimentally predicted fatigue data of the casted AS7G06 aluminium alloys with measured internal defects. The probabilistic analysis approach not only predicts the fatigue life limit of the structure but also provides the limit of fatigue life for the known porosity values of any casted aluminium bearing support structure used in aero engines.

The probabilistic fatigue model for addressing porosity in casting structure is verified with experimental results.

This is grey area in aerospace and automotive industry.

This work is original and not published anywhere else.

The purpose of this paper is to develop an approach to optimize the cycles‐to‐failure of a peened component with respect to laser peening (LP) variables: pressure magnitude, mid‐span, and spot size when the component is subject to a variable amplitude loading.

To optimally design an LP process, an experimentally validated 3D finite element simulation of the LP process, a cycles‐to‐failure estimation capability incorporating residual stress, and a particle swarm optimization strategy were developed and employed to maximize the cycles‐to‐failure of a component of a titanium turbine disk.

The most critical finding of this research is that a minor difference in the residual stress profile can lead to a large difference in the cycles‐to‐failure. This finding implies that selecting the optimization objective to be the cycles‐to‐failure is a better option as compared to the residual stress profile.

The LP‐induced residual stresses are assumed static and do not change as number of load cycles increase.

The paper develops a framework that relates the LP variables and the cycles‐to‐failure of a peened component. A modified particle swarm optimization approach is developed to optimize the fatigue life of a turbine disk.

The purpose of this paper is to examine the mechanical behaviour of additively manufactured Ti-6Al-4V under cyclic loading. Using as-built selective laser melting (SLM) Ti-6Al-4V in engineering applications requires a detailed understanding of its elastoplastic behaviour. This preliminary study intends to create a better understanding on the cyclic plasticity phenomena exhibited by this material under symmetric and asymmetric strain-controlled cyclic loading.

This paper investigates experimentally the cyclic elastoplastic behaviour of as-built SLM Ti-6Al-4V under symmetric and asymmetric strain-controlled loading histories and compares it to that of wrought Ti-6Al-4V. Moreover, a plasticity model has been customised to simulate effectively the mechanical behaviour of the as-built SLM Ti-6Al-4V. This model is formulated to account for the SLM Ti-6Al-4V-specific characteristics, under the strain-controlled experiments.

The elastoplastic behaviour of the as-built SLM Ti-6Al-4V has been compared to that of the wrought material, enabling characterisation of the cyclic transient phenomena under symmetric and asymmetric strain-controlled loadings. The test results have identified a difference in the strain-controlled cyclic phenomena in the as-build SLM Ti-6Al-4V when compared to its wrought counterpart, because of a difference in their microstructure. The plasticity model offers accurate simulation of the observed experimental behaviour in the SLM material.

Further investigation through a more extensive test campaign involving a wider set of strain-controlled loading cases, including multiaxial (biaxial) histories, is required for a more complete characterisation of the material performance.

The present investigation offers an advancement in the knowledge of cyclic transient effects exhibited by a typical α’ martensite SLM Ti-6Al-4V under symmetric and asymmetric strain-controlled tests. The research data and findings reported are among the very few reported so far in the literature.

This paper aims to present the fatigue life behaviour of upper arm suspension. The main objectives are to predict the fatigue life of the component and to identify the critical location. In this analysis, three aluminium alloys were used for the suspension, and their fatigue life was compared to select the suitable material for the suspension arm.

CAD model was prepared using Solid Works software, and finite element analysis was done using ANSYS 14.0 software by importing the Parasolid file to ANSYS. The model is subjected to loading and boundary conditions; the authors consider a vertical force with constant amplitude applied at the bushing that connected to the tire, the others two bushing that connected to the body of the car are constraint. Tetrahedral elements given enhanced results as compared to other types of elements; therefore, the elements (TET 10) are used. The maximum principal stress was considered in the linear static analysis, and fatigue analysis was done using strain life approach.

Life and damage are evaluated and the critical location was considered at node 63,754. From the fatigue analysis, aluminium alloys 7175-T73 (Al 90%-Zn 5.6%-Mg 2.5% -… …) and 2014-T6 (Al 93.5%-Cu 4.4%-Mg 0.5%… …) present a similar behaviour as compared to 6061-T6 (Al 97.9%-Mg 1.0%-Si 0.6%… … .); in this case of study, these lather are considered to be the materials of choice to manufacture the suspension arms; but 7175-T73 aluminium alloys remain the material with a better resistance to fatigue.

By the finite element analysis method and assistance of ANSYS software, it is able to analyse the different car components from varied aspects such as fatigue, and consequently save time and cost. For further research, the experimental works under controlled laboratory conditions should be done to determine the validation of the result from the software analysis.

The majority of machine component failures are caused by load conditions that change with time. Under those circumstances, the component can function effectively for a long time but then breaks down unexpectedly and without warning. Therefore, the study of fatigue considerations in design becomes important. Also, to determine the component's long-term tenability, fatigue behavior must be investigated. This paper aims to investigate the fatigue life of aluminum 6061-T6 alloy under uniaxial loading using experiments and finite element simulation.

Both base metal (BM) and friction stir welding (FSW) configurations have been used to analyze fatigue behavior. The experimental tests were carried out using Instron-8801 hydraulic fatigue testing machine at frequency of 20 Hz and load ratio of 0.1. The yield strength, ultimate tensile strength, amplitude stress and fatigue life were used as input in simulation analysis software. Based on the findings of the tensile test, the maximum stress applied during the fatigue testing was estimated. Simulated and experimental results were also used to plot and validate the S-N curves. The fracture behavior of specimens was also examined using fractographic analysis.

The fractured surfaces indicate both brittle and ductile failure in the specimens. However, dimples dominated during the final fracture. The comparison between experimental and simulation results illustrates that the difference in fatigue cycles increases with an increase in the yield strength of both BM and FSWed specimens. This disparity is attributed to many factors such as scratches, rough surfaces and microstructural behavior. Aluminum 6061-T6 alloy is considered a noteworthy material where high strength with reduced weight contributes to the crash-worthy design of automobile structures.

The current study is significant in the prediction of the fatigue life of aluminum 6061-T6 alloy using experiments and simulation analysis. A good correlation was found when the experimental and simulation analysis were compared. The proposed simulation analysis approach can be used to anticipate a component's fatigue life.

The purpose of this paper is to evaluate the fatigue process through the dynamic analysis of the global structural model and local static sub-modelling in a critical detail using the hot-spot stress approach. The detail was studied in three different positions at the “Alcácer do Sal” access viaduct, and the methodologies from the IIW and Eurocode EN 1993-1-9 were compared.

In this study, the fatigue life process based on the hot-spot stress approach was evaluated using a global dynamic analysis and a local sub-modelling based on a static analysis of welded connections in the “Alcácer do Sal” railway structure, Portugal, taking into consideration the recommendations from IIW and Eurocode EN 1993-1-9. The hot-spot stresses were calculated through the static analysis of the sub-model of the welded connection for each vibration mode with the aim to obtain the temporal stresses using the modal coordinates and modal stresses of the extrapolation points. The Ansys® and Matlab® softwares were used for the numerical analysis and the hot-spot stress calculations, respectively.

The proposed methodology/approach to obtain fatigue assessment is based on the modal analysis of the global structural model and local static sub-modelling. The modal analysis was used to extract the boundary conditions to be used in the local model to determine the temporal stresses of the extrapolation points. Based on the modal superposition method, the stresses as function of time were obtained for fatigue life evaluation of a critical detail by the hot-spot stress approach. The detail was studied in three different positions.

In the present study, a global-local fatigue methodology based on dynamic analysis of the global structural model and local static sub-modelling of the critical detail using the hot-spot stress approach is proposed. Herein, the modal analysis of the global structural model supported by the modal superposition method was used to obtain the matrix of modal coordinates. The static analysis of the local sub-model for each mode from the modal analysis of global structural model was done to estimate the hot-spot stresses. The fatigue damage calculation was based on S-N curve of the critical detail and rainflow method. The IIW recommendation proved to be more conservative compared to the proposed rules in the Eurocode EN 1993-1-9. The global-local modelling based on dynamic analysis is an important and effective tool for fatigue evaluation in welded joints.