Search results

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

Contemporary literature reveals that, to date, the poultry livestock sector has not received sufficient research attention. This particular industry suffers from unstructured supply chain practices, lack of awareness of the implications of the sustainability concept and failure to recycle poultry wastes. The current research thus attempts to develop an integrated supply chain model in the context of poultry industry in Bangladesh. The study considers both sustainability and supply chain issues in order to incorporate them in the poultry supply chain. By placing the forward and reverse supply chains in a single framework, existing problems can be resolved to gain economic, social and environmental benefits, which will be more sustainable than the present practices.

The theoretical underpinning of this research is ‘sustainability’ and the ‘supply chain processes’ in order to examine possible improvements in the poultry production process along with waste management. The research adopts the positivist paradigm and ‘design science’ methods with the support of system dynamics (SD) and the case study methods. Initially, a mental model is developed followed by the causal loop diagram based on in-depth interviews, focus group discussions and observation techniques. The causal model helps to understand the linkages between the associated variables for each issue. Finally, the causal loop diagram is transformed into a stock and flow (quantitative) model, which is a prerequisite for SD-based simulation modelling. A decision support system (DSS) is then developed to analyse the complex decision-making process along the supply chains.

The findings reveal that integration of the supply chain can bring economic, social and environmental sustainability along with a structured production process. It is also observed that the poultry industry can apply the model outcomes in the real-life practices with minor adjustments. This present research has both theoretical and practical implications. The proposed model’s unique characteristics in mitigating the existing problems are supported by the sustainability and supply chain theories. As for practical implications, the poultry industry in Bangladesh can follow the proposed supply chain structure (as par the research model) and test various policies via simulation prior to its application. Positive outcomes of the simulation study may provide enough confidence to implement the desired changes within the industry and their supply chain networks.

Presents a methodology called controllability analysis in logistics. Controllability focuses on two first steps of the simulation project: problem definition; and data gathering and analysis. The aim of the analysis is to reveal the potential improvement areas, and define and analyse the data so that they are ready for the simulation process. Clarifies with a case study the methodology and its use as a part of a logistics simulation project.

The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales, 2014).

This structured literature search covers papers published in 23 journals in IOM in the period 1990–2014.

The search yielded a sample of 208 unique papers with 275 results (one paper could refer to multiple cost management methods). The top 3 methods are modular design, component commonality, and product platforms, with 115 results (42%) together. In the MA literature, these three methods accounted for 29%, but target costing was the most researched cost management method by far (26%). Simulation is the most frequently used research method in the IOM literature, whereas this was averagely used in the MA literature; qualitative studies were the most frequently used research method in the MA literature, whereas this was averagely used in the IOM literature. We found a lot of papers presenting practical approaches or decision models as a further development of a particular cost management method, which is a clear difference from the MA literature.

This review focused on the same cost management methods, and future research could also consider other cost management methods which are likely to be more important in the IOM literature compared to the MA literature. Future research could also investigate innovative cost management practices in more detail through longitudinal case studies.

This review of research on methods for cost management published outside the MA literature provides an overview for MA researchers. It highlights key differences between both literatures in their research of the same cost management methods.

This chapter presents two established pedagogical techniques to increase student engagement, simulations and peer assessment. The use of each technique, its benefits and drawbacks, and how content knowledge and student engagement increase are detailed. While each of the approaches can be utilized independently to create active learning environments, this chapter illustrates the potential to extend these approaches further. An overview of an MBA-level elective on competitive analysis structured around a simulation and peer assessment is presented. The result is a highly interactive and engaging course where the simulation and peer assessments achieve symbiotic benefits. Learning and performance in the simulation is enhanced by the application of competitive analyst reports which are used by peer “clients.” Assessment in turn leads to greater insights to the simulation, and subsequently higher levels of performance on both the simulation and future analysis work. Insights on these instructional methods, their limitations, and potential barriers to adoption are offered with the hope of inspiring others to utilize and experiment with novel approaches for further enhance learner engagement.

Hybrid simulation, which is a general technique for obtaining the seismic response of an entire structure, is an improvement of the traditional seismic test technique. In order to improve the analysis accuracy of the numerical substructure in hybrid simulation, the purpose of this paper is to propose an innovative hybrid simulation technique. The technique combines the multi-scale finite element (MFE) analysis method and hybrid simulation method with the objective of achieving the balance between the accuracy and efficiency for the numerical substructure simulation.

To achieve this goal, a hybrid simulation system is established based on the MTS servo control system to develop a hybrid analysis model using an MFE model. Moreover, in order to verify the efficiency of the technique, the hybrid simulation of a three-storey benchmark structure is conducted. In this simulation, a ductile column—represented by a half-scale scale specimen—is selected as the experimental element, meanwhile the rest of the frame is modelled as microscopic and macroscopic elements in the Abaqus software simultaneously. Finally, to demonstrate the stability and accuracy of the proposed technique, the seismic response of the target structure obtained via hybrid simulation using the MFE model is compared with that of the numerical simulation.

First, the use of the hybrid simulation with the MFE model yields results similar to those obtained by the fine finite element (FE) model using solid elements without adding excessive computing burden, thus advancing the application of the hybrid simulation in large complex structures. Moreover, the proposed hybrid simulation is found to be more versatile in structural seismic analysis than other techniques. Second, the hybrid simulation system developed in this paper can perform hybrid simulation with the MFE model as well as handle the integration and coupling of the experimental elements with the numerical substructure, which consists of the macro- and micro-level elements. Third, conducting the hybrid simulation by applying earthquake motion to simulate seismic structural behaviour is feasible by using Abaqus to model the numerical substructure and harmonise the boundary connections between three different scale elements.

In terms of the implementation of the hybrid simulation with the MFE model, this work is helpful to advance the hybrid simulation method in the structural experiment field. Nevertheless, there is still a need to refine and enhance the current technique, especially when the hybrid simulation is used in real complex engineering structures, having numerous micro-level elements. A large number of these elements may render the relevant hybrid simulations unattainable because the time consumed in the numeral calculations can become excessive, making the testing of the loading system almost difficult to run smoothly.

The MFE model is implemented in hybrid simulation, enabling to overcome the problems related to the testing accuracy caused by the numerical substructure simplifications using only macro-level elements.

This paper is the first to recognise the advantage of the MFE analysis method in hybrid simulation and propose an innovative hybrid simulation technique, combining the MFE analysis method with hybrid simulation method to strike a delicate balance between the accuracy and efficiency of the numerical substructure simulation in hybrid simulation. With the help of the coordinated analysis of FEs at different scales, not only the accuracy and reliability of the overall seismic analysis of the structure is improved, but the computational cost can be restrained to ensure the efficiency of hybrid simulation.

This paper gives a bibliographical review of the finite element methods (FEMs) applied to the analysis of ceramics and glass materials. The bibliography at the end of the paper contains references to papers, conference proceedings and theses/dissertations on the subject that were published between 1977‐1998. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, ferrites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

Introduction Operations research, i.e. the application of scientific methodology to operational problems in the search for improved understanding and control, can be said to have started with the application of mathematical tools to military problems of supply bombing and strategy, during the Second World War. Post‐war these tools were applied to business problems, particularly production scheduling, inventory control and physical distribution because of the acute shortages of goods and the numerical aspects of these problems.

This paper gives a bibliographical review of the finite element and boundary element parallel processing techniques from the theoretical and application points of view. Topics include: theory – domain decomposition/partitioning, load balancing, parallel solvers/algorithms, parallel mesh generation, adaptive methods, and visualization/graphics; applications – structural mechanics problems, dynamic problems, material/geometrical non‐linear problems, contact problems, fracture mechanics, field problems, coupled problems, sensitivity and optimization, and other problems; hardware and software environments – hardware environments, programming techniques, and software development and presentations. The bibliography at the end of this paper contains 850 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1996 and 2002.