Search results

This paper aims to present a methodology, based on traditional approaches, to predict the fatigue life and non‐propagating cracks of shot peened components and the damaging effect of a scratch created over the treated surface.

The finite element method is used to determine the actual strain at surface and fracture mechanics parameters calculated from cracks at the surface. The model considers residual stress (in order to introduce the effect of shot peening) and the scratch geometry. The total fatigue life is obtained by adding initiation life, to early and long crack propagation life using appropriate criteria.

Numerical predictions were compared with previous experimental tests, showing that this method is quite reliable for predicting both fatigue life and non‐propagating cracks of shot peened components, including the effect of damage due to a scratch.

The proposed method provides good results and a clear understanding of the fatigue process, however it requires a considerable amount of both material and shot peening parameters.

The methodology presented in this paper allows the determination of fatigue life and the prediction of non‐propagating cracks for components, including the effects of shot peening and scratch damage. These results can be used to quantify the scratch damage limits of components improved by shot peening.

This paper provides a useful tool for prediction of the effects of shot peening and scratch damage on fatigue life, using traditional approaches.

This paper aims to present the fatigue life behaviour of upper arm suspension. The main objectives are to predict the fatigue life of the component and to identify the critical location. In this analysis, three aluminium alloys were used for the suspension, and their fatigue life was compared to select the suitable material for the suspension arm.

CAD model was prepared using Solid Works software, and finite element analysis was done using ANSYS 14.0 software by importing the Parasolid file to ANSYS. The model is subjected to loading and boundary conditions; the authors consider a vertical force with constant amplitude applied at the bushing that connected to the tire, the others two bushing that connected to the body of the car are constraint. Tetrahedral elements given enhanced results as compared to other types of elements; therefore, the elements (TET 10) are used. The maximum principal stress was considered in the linear static analysis, and fatigue analysis was done using strain life approach.

Life and damage are evaluated and the critical location was considered at node 63,754. From the fatigue analysis, aluminium alloys 7175-T73 (Al 90%-Zn 5.6%-Mg 2.5% -… …) and 2014-T6 (Al 93.5%-Cu 4.4%-Mg 0.5%… …) present a similar behaviour as compared to 6061-T6 (Al 97.9%-Mg 1.0%-Si 0.6%… … .); in this case of study, these lather are considered to be the materials of choice to manufacture the suspension arms; but 7175-T73 aluminium alloys remain the material with a better resistance to fatigue.

By the finite element analysis method and assistance of ANSYS software, it is able to analyse the different car components from varied aspects such as fatigue, and consequently save time and cost. For further research, the experimental works under controlled laboratory conditions should be done to determine the validation of the result from the software analysis.

To suppress fatigue damage and ensure structural safety, this paper aims to analyze the effect of the damage accumulation on the aeroelastic model of an air-breathing hypersonic flight vehicle (AHFV).

Initially, by constructing the modified longitudinal elastic model of an AHFV, the stress condition of the fuselage is analyzed, and the model differences with the rigid body are studied. Then, a new damage dynamic model is presented to describe the damage dynamic evolution. Finally, combining the damage model and the longitudinal model of the AHFV, the key variables affecting the damage accumulation are determined.

It is demonstrated that the elastic deformation must be considered when analyzing the damage characteristics of the fuselage and to determine the key variables that affect the damage accumulation, which provides a more accurate reference for improving the structural reliability and lifespan of AHFVs.

The novelty of this paper comes from the application of the force and stress models for the damage evolution of the AHFV and the development of a new damage model for the entire body with the elastic dynamics of AHFVs.

Engineering components/structures with geometric discontinuities normally bear complex and variable loads, which lead to a multiaxial and random/variable amplitude stress/strain state. Hence, this study aims how to effectively evaluate the multiaxial random/variable amplitude fatigue life.

Recent studies on critical plane method under multiaxial random/variable amplitude loading are reviewed, and the computational framework is clearly presented in this paper.

Some basic concepts and latest achievements in multiaxial random/variable amplitude fatigue analysis are introduced. This review summarizes the research status of four main aspects of multiaxial fatigue under random/variable amplitude loadings, namely multiaxial fatigue criterion, method for critical plane determination, cycle counting method and damage accumulation criterion. Particularly, the latest achievements of multiaxial random/variable amplitude fatigue using critical plane methods are classified and highlighted.

This review attempts to provide references for further research on multiaxial random/variable amplitude fatigue and to promote the development of multiaxial fatigue from experimental research to practical engineering application.

Engineering components/structures are usually subjected to complex and variable loads, which result in random multiaxial stress/strain states. However, fatigue analysis methods under constant loads cannot be directly applied to fatigue life prediction analysis under random loads. Therefore, the purpose of this study is how to effectively evaluate fatigue life under multiaxial random loading.

First, the average phase difference is characterized as the ratio of the number of shear strain cycles to the number of normal strain cycles, and the new non-proportional additional hardening factor is proposed. Then, the determined random typical load spectrum is processed into a simple variable amplitude load spectrum, and the damage in each plane is calculated according to the multiaxial fatigue life prediction model and Miner theory. Meanwhile, the cumulative damage can be calculated separately by projection method. Finally, the maximum projected cumulative damage plane is defined as the critical plane of multiaxial random fatigue.

The fatigue life prediction capability of the method is verified based on test data of TC4 titanium alloy under random multiaxial loading. Most of the predicting results are within double scatter bands.

The objective of this study is to provide a reference for the determination of critical plane and non-proportional additional hardening factor under multiaxial random loading, and to promote the development of multiaxial fatigue from experimental studies to practical engineering applications.

With the fatigue ductility test the ductility of metallic foils and flexible metal foil/dielectric laminates can be determined. Ductility together with tensile strength allows prediction of the fatigue behaviour of flexible printed wiring (FPW) in both the low‐cycle/high‐strain (ductility dependent) and the high‐cycle/low‐strain (strength dependent) ranges. However, for laminates and FPW with Kapton as the dielectric the standard fatigue ductility test method does not produce the expected results and flex life predictions deviate from experimental results. The results of a study to determine the cause of this anomalous behaviour of Kapton FPW and to find correlative correction procedures are reported. Corrections to account for both the cyclic strain‐hardening of rolled annealed copper foil and the Kapton/adhesive/copper interactions for asymmetric single‐sided FPW are presented. With these corrections the ductility determination for copper foil laminated to a Kapton substrate using the fatigue ductility test produces good results, and the fatigue life of symmetric Kapton FPW can be predicted from the copper foil properties. The underlying mechanisms for the strong deviational flex behaviour of asymmetric single‐sided FPW could not be identified. The recommendation is made that for high‐cycle flex applications the FPW construction be precisely symmetrical. FPW made from copper‐clad Kapton with rolled annealed copper foil is the overwhelming choice and it is important that one has proper acceptance criteria at incoming inspection and that a valid prediction methodology for FPW flexural resistance and fatigue behaviour is available.

A method for the prediction of solder joint cycle life in surface‐mount assemblies is presented, based on the conversion of plastic solder shear strain into cycle life by means of an equation derived by Engelmaier. The paper introduces a different analytical procedure for the determination of solder joint shear strain. Shear strain is normally calculated from temperature and TCE differentials between package and interconnect board without consideration of elastic deformations. The suggested method derives average plastic shear strain of the solder joint at maximum temperature excursion from finite‐element analysis of a simple model consisting of an interconnect board, a solder joint and a package. All materials in the model have linear (elastic) properties, except solder which has non‐linear (elastic/plastic) characteristics. The solder stress/strain curve is described to the finite‐element programme with temperature‐dependent bilinear approximations. The solder joint is modelled as a single finite element so that only one value is computed for the plastic shear strain in the solder joint. This value represents the average shear strain which is converted into solder joint cycle life. The cycle life predictions with the finite‐element method are confirmed by cycling results obtained on actual hardware. The described method can serve as a design tool in the optimisation of surface‐mount assemblies. The procedure can help to define accelerated temperature cycling conditions.

In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.

First, strain-controlled fatigue tests with strain ratios of 0, 0.5 and −1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.

The proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin–Manson equation, Morrow model and Smith–Watson–Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.

In this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.

During the running of automobile, the stabilizer bar is frequently subjected to the impact of complex random loads, which is prone to fatigue failure and accident. In regard to this, the purpose of this paper is to study and discuss fatigue life of automobile stabilizer bar.

Durability bench test shows that failure is located at the joint of sleeve and stabilizer bar body. Based on the collection and compilation of micro-strain load spectrum of the stabilizer bar, the strain-life model is studied considering the influence of average stress and maximum stress at failure area. Seven-grade strain-life curves of the stabilizer bar are established. According to the principle of linear damage accumulation, the relationship between fatigue life and damage is discussed, then the fatigue life of stabilizer bar is predicted. Fatigue life evaluation is carried out from three aspects: reliability analysis, static analysis and fatigue life simulation.

The results show that the reliability of the test sample is 99.9 percent when the confidence is 90 percent and the durability is 1,073 load spectrum cycles; the ratios of predicted and simulated life to design life are 2.77 and 2.30, respectively.

Based on the road load characteristics of automobile stabilizer bar, the method of fatigue life prediction and evaluation is discussed, which provides a basis for the design and development of automobile chassis components.

A large number of data have proved that under the same von Mises equivalent strain condition, the fatigue life under multiaxial non-proportional loading is often much lower than the life under multiaxial proportional loading. This is mainly due to the influence of the non-proportional loading path and the additional hardening effect, which lead to a sharp decrease in life.

The modulus attenuation effect is used to modify the static hardening coefficient, and the predicted value obtained is closer to the additional hardening coefficient obtained from the experiment. A fatigue life model can consider non-proportional paths, and additional hardening effects are proposed. And the model uses multiaxial fatigue test data to verify the validity and adaptability of the new model. The life prediction accuracy and material application range are satisfactory.

Because loading path and additional hardening of the material affect fatigue life, a new multiaxis fatigue life model based on the critical plane approach is proposed. And introducing a non-proportional additional damage coefficient, the joint influence of the load path and the additional hardening can be considered. The model's life prediction accuracy and material applicability were verified with multiaxial fatigue test data of eight materials and nine loads compared with the prediction accuracy of the Kandil–Brown–Miller (KBM) model and Fatemi–Socie (FS) model.

The physical meaning of the new model is clear, convenient for practical engineering applications.