Search results

This study assessed two technology systems aimed at enabling a man with intellectual disability, blindness, deafness and motor and tactile discrimination problems to make verbal requests through simple one-hand signs.

The study was conducted according to an ABAB design. During the B (intervention) phases, the man used the two systems, which included (1) nine mini recording devices fixed on the man’s clothes or wheelchair (i.e. in positions the man touched with his sign movements) and (2) nine tags with radio frequency identification codes (fixed at approximately the same positions as the mini recording devices) and a dedicated tag reader, respectively. Making a sign (i.e. touching a recording device or reaching a tag) led to the verbalization of the request related to that sign.

During baseline, the mean frequency of signs/requests made was below 2 per session, and only some of those requests were identified/satisfied. During the intervention, the mean frequency of requests made and satisfied was about 10 per session with each of the systems.

The results, which are to be taken with caution given the preliminary nature of the study, seem to suggest that the systems can help translate simple signs into verbal requests.

Lack of research means guidance regarding the most effective sensory interventions for adults with intellectual disabilities is limited. Preliminary consensus evidence was created by gathering experienced occupational therapists’ views on practice. The purpose of this study was to establish important elements of practice when using sensory integration-informed approaches on assessment and treatment units.

A modified Delphi process was used to gather, explore and synthesise the views of 13 occupational therapists. Data was collected via online surveys and included quantitative importance ratings and qualitative comments.

An experienced panel was in strong agreement regarding many elements of practice they felt were important for use in this setting, and a list of important practice items was created. Two themes were identified: “Complexity” and “Pragmatism vs. Ideal World.” The themes highlight challenges to practice in this area and the complex clinical reasoning used to overcome these.

Participants disagreed about the level of importance of a substantial number of items, therefore items that did not reach consensus may still be important.

This study indicates potentially helpful clinical tools, facilities and training and identifies support needed for occupational therapists working in these settings.

This study contributes to the body of knowledge regarding how occupational therapists do and could work with people with intellectual disabilities and sensory integration difficulties. Although this study takes a UK and Ireland perspective, similar agendas regarding care and support for those with intellectual disabilities internationally mean findings are relevant more widely.

This paper reviews the current literature on theoretical and methodological issues in discrete choice experiments, which have been widely used in non-market value analysis, such as elicitation of residents' attitudes toward recreation or biodiversity conservation of forests.

We review the literature, and attribute the possible biases in choice experiments to theoretical and empirical aspects. Particularly, we introduce regret minimization as an alternative to random utility theory and sheds light on incentive compatibility, status quo, attributes non-attendance, cognitive load, experimental design, survey methods, estimation strategies and other issues.

The practitioners should pay attention to many issues when carrying out choice experiments in order to avoid possible biases. Many alternatives in theoretical foundations, experimental designs, estimation strategies and even explanations should be taken into account in practice in order to obtain robust results.

The paper summarizes the recent developments in methodological and empirical issues of choice experiments and points out the pitfalls and future directions both theoretically and empirically.

The purpose of this paper is to evaluate and exploit the combination of additive manufacturing polymeric technology and structural adhesives. The main advantage is to expand the maximum dimension of the 3D printed parts, which is typically limited, by joining the parts with structural adhesive, without losing strength and stiffness and keeping the major asset of polymeric 3 D printing: freedom of shape of the system and low cost of parts.

The materials used in the paper are the following. The adhesive considered is a commercial inexpensive acrylic, quite similar to superglue, applicable with almost no surface preparation and fast curing, as time constraint is one of the key problems that affects industrial adhesive applications. The 3D printed parts were in acrylonitrile butadiene styrene (ABS), obtained with a Fortus 250mc FDM machine, from Stratasys. The work first compares flat overlap joint with joints designed to permit mechanical interlocking of the adherends and then to a monolithic component with the same geometry. Single lap, joggle lap and double lap joints are the configurations experimentally characterized following a design of experiment approach.

The results show a failure in the substrate, due to the low strength of the polymeric adherends for the first batch of typical bonded configurations, single lap, joggle lap and double lap. The central bonded area, with an increased global thickness, never does fail, and the adhesive is able to transfer the load both with and without mechanical interlocking. An additional set of scarf joints was also tested to promote adhesive failure as well as to retrieve the adhesive strength in this application. The results shows that bonding of polymeric AM parts is able to express its full potential compared with a monolithic solution even though the joint fails prematurely in the adherend due to the bending stresses and the notches present in the lap joints.

Because of the 3D printed polymeric material adopted, the results may be generalized only when the elastic properties of the adherends and of the adhesive are similar, so it is not possible to extend the findings of the work to metallic additive manufactured components.

The paper shows that the adhesives are feasible way to expand the potentiality of 3 D printed equipment to obtain larger parts with equivalent mechanical properties. The paper also shows that the scarf joint, which fails in the adhesive first, can be used to extract information about the adhesive strength, useful for the designers which have to combine adhesive and additive manufactured polymeric parts.

To the best of the researchers’ knowledge, there are scarce quantitative information in technical literature about the performance of additive manufactured parts in combination with structural adhesives and this work provides an insight on this interesting subject. This manuscript provides a feasible way of using rapid prototyping techniques in combination with adhesive bonding to fully exploit the additive manufacturing capability and to create large and cost-effective 3 D printed parts.

Despite corporate communications having an immense impact on corporate success, there is a lack of dedicated techniques for their management and visualization. A potential strategy is to apply business process management (BPM) approach with business process model and notation (BPMN) modeling techniques.

The goal of this study was to gain empirical insights into the cognitive effectiveness of BPMN-based corporate communications modeling. To this end, experimental research was performed in which subjects tested two modeling notations – standardized BPMN conversation diagrams and a BPMN extension with corporate communications-specific concepts.

Standard conversation diagrams were demonstrated to be more time-efficient for designing and interpreting diagrams. However, the subjects made significantly fewer mistakes when interpreting the diagrams modeled in the BPMN extension. Subjects also evolved positive perceptions toward the proposed extension.

BPMN-based corporate communications modeling may be applied to organizations to depict how formal communications are or should be performed consistently, effectively and transparently by following and integrating with BPM approaches and modeling techniques.

The paper provides empirical insights into the cognitive effectiveness of corporate communications modeling based on BPMN and positions the corresponding models into typical process architecture.