Search results

The purpose of this paper is to evaluate the performance of a numerical method for the solution to shallow-water equations on a staggered grid, in simulations for shear instabilities at two convective Froude numbers.

The simulations start from a small perturbation to a base flow with a hyperbolic-tangent velocity profile. The subsequent development of the shear instabilities is studied from the simulations using a number of flux-limiting schemes, including the second-order MINMOD, the third-order ULTRA-QUICK and the fifth-order WENO schemes for the spatial interpolation of the nonlinear fluxes. The fourth-order Runge-Kutta method advances the simulation in time.

The simulations determine two parameters: the fractional growth rate of the linear instabilities; and the vorticity thickness of the first nonlinear peak. Grid refinement using 32, 64, 128, 256 and 512 nodes over one wave length determines the exact values by extrapolation and the computational error for the parameters. It also determines the overall order of convergence for each of the flux-limiting schemes used in the numerical simulations.

The four-digit accuracy of the numerical simulations presented in this paper are comparable to analytical solutions. The development of this reliable numerical simulation method has paved the way for further study of the instabilities in shear flows that radiate waves.

This study aims to investigate the morphing concepts able to manipulate the dynamics of the downstream unsteadiness in the separated shear layers and, in the wake, be able to modify the upstream shock–boundary layer interaction (SBLI) around an A320 morphing prototype to control these instabilities, with emphasis to the attenuation or even suppression of the transonic buffet. The modification of the aerodynamic performances according to a large parametric study carried out at Reynolds number of 4.5 × 10⁶, Mach number of 0.78 and various angles of attack in the range of (0, 2.4)° according to two morphing concepts (travelling waves and trailing edge vibration) are discussed, and the final benefits in aerodynamic performance increase are evaluated.

This article examines through high fidelity (Hi-Fi) numerical simulation the effects of the trailing edge (TE) actuation and of travelling waves along a specific area of the suction side starting from practically the most downstream position of the shock wave motion according to the buffet and extending up to nearly the TE. The present paper studies through spectral analysis the coherent structures development in the near wake and the comparison of the aerodynamic forces to the non-actuated case. Thus, the physical mechanisms of the morphing leading to the increase of the lift-to-drag ratio and the drag and noise sources reduction are identified.

This study investigates the influence of shear-layer and near-wake vortices on the SBLI around an A320 aerofoil and attenuation of the related instabilities thanks to novel morphing: travelling waves generated along the suction side and trailing-edge vibration. A drag reduction of 14% and a lift-to-drag increase in the order of 8% are obtained. The morphing has shown a lift increase in the range of (1.8, 2.5)% for angle of attack of 1.8° and 2.4°, where a significant lift increase of 7.7% is obtained for the angle of incidence of 0° with a drag reduction of 3.66% yielding an aerodynamic efficiency of 11.8%.

This paper presents results of morphing A320 aerofoil, with a chord of 70cm and subjected to two actuation kinds, original in the state of the art at M = 0.78 and Re = 4.5 million. These Hi-Fi simulations are rather rare; a majority of existing ones concern smaller dimensions. This study showed for the first time a modified buffet mode, displaying periodic high-lift “plateaus” interspersed by shorter lift-decrease intervals. Through trailing-edge vibration, this pattern is modified towards a sinusoidal-like buffet, with a considerable amplitude decrease. Lock-in of buffet frequency to the actuation is obtained, leading to this amplitude reduction and a drastic aerodynamic performance increase.

The purpose of the present study is to develop a new numerical framework that can predict the supersonic base flow more accurately, including the development of axisymmetrically separated shear layer and recompression shock. To this end, two aspects are improved and combined, i.e. a newly self-adaptive turbulence eddy simulation (SATES) turbulence modeling method and a high-order discretization numerical scheme. Furthermore, the performance of the new numerical framework within a general-purpose PHengLEI software is assessed in detail.

Satisfactory prediction of the supersonic separated shear layer with unsteady wake flow is quite challenging. By using a unified turbulence model called SATES combining high-order accurate discretization numerical schemes, the present study first assesses the performance of newly developed SATES for supersonic axisymmetric separation flows. A high-order finite differencing-based compressible computational fluid dynamics (CFD) code called PHengLEI is developed and several different numerical schemes are used to investigate the effects on shock-turbulence interactions, which include the monotonic upstream-centered scheme for conservation laws (MUSCL), weighted compact nonlinear scheme (WCNS) and hybrid cell-edge and cell-node dissipative compact scheme (HDCS).

Compared with the available experimental data and the numerical predictions, the results of SATES by using high-order accurate WCNS or HDCS schemes agree better with the experiments than the results by using the MUSCL scheme. The WCNS and HDCS can also significantly improve the prediction of flow physics in terms of the instability of the annular shear layer and the evolution of the turbulent wake.

The small deviations in the recirculation region can be found between the present numerical results and experimental data, which could be caused by the inaccurate incoming boundary layer condition and compressible effects. Therefore, a proper incoming boundary layer condition with turbulent fluctuations and compressibility effects need to be considered to further improve the accuracy of simulations.

The present study evaluates a high-order discretization-based SATES turbulence model for supersonic separation flows, which is quite valuable for improving the calculation accuracy of aeronautics applications, especially in supersonic conditions.

For the first time, the newly developed SATES turbulence modeling method combining the high-order accurate WCNS or HDCS numerical schemes is implemented on the PHengLEI software and successfully applied for the simulations of supersonic separation flows, and satisfactory results are obtained. The unsteady evolutions of the supersonic annular shear layer are analyzed, and the hairpin vortex structures are found in the simulation.

This study aims to perform three-dimensional numerical computations for blood flow through a double stenosed carotid artery. Pulsatile flow with Womersley number (Wo) of 4.65 and Reynolds number (Re) of 425, based on the diameter of normal artery and average velocity of inlet pulse, was considered.

Finite volume method based ANSYS Fluent 20.1 was used for solving the governing equations of three-dimensional, laminar, incompressible and non-Newtonian blood flow. A high-quality grid with sufficient refinement was generated using ICEM CFD 20.1. The time-averaged flow field was captured to investigate the effect of severity and eccentricity on the lumen flow characteristics.

The results show that an increase in interspacing between blockages brings shear layer instability within the region between two blockages. The velocity profile and wall shear stress distribution are found to be majorly influenced by eccentricity. On the other hand, their peak magnitude is found to be primarily influenced by severity. Results have also demonstrated that the presence of eccentricity in stenosis would assist in flow development.

Variation in severity and interspacing was considered with a provision of eccentricity equal to 10% of diameter. Eccentricity refers to the offset between the centreline of stenosis and the centreline of normal artery. For the two blockages, severity values of 40% and 60% based on diameter reduction were permuted, giving rise to four combinations. For each combination, three values of interspacing in the multiples of normal artery diameter (D), viz. 4D, 6D and 8D were considered.

This study aims to investigate the cross-sectional reshaping in transitioning/starting rectangular jets of aspect ratio 2 under various inlet perturbation conditions at the Reynolds number of Re = UD_h/v = 17,750.

Large eddy simulation results compared with the phase-locked particle image velocimetry data exhibit the cross-sectional jet deformations from rectangular to rounder shapes. Inflow velocity oscillations are introduced at the fundamental frequency associated with the Kelvin–Helmholtz instability characterized by the spectral analysis of the hotwire data and the linear stability predictions.

The initially rectangular cross-section of the jet reshapes into the rounder geometries with increased downstream distance while the edges of the jet become distorted due to the shear layer instability more significantly observed near the high curvature corners. The different expansion rates in the longer and shorter edges of the jet and the consequent cross-sectional reshaping are found to be sensitive to small levels of random inlet perturbations. In addition, introducing controlled sinusoidal oscillations results in the formation of more organized trailing shear layer where the stronger vortex rings go through the curvature-induced deformations.

Spatio-temporal study of vortex dynamics in transitioning rectangular jets reveals important information about the effect of the controlled jet forcing on local entrainment. Dynamics of the leading vortex dominates the entrainment in transitioning jets which are commonly used in practical applications. Near-field entrainment is also promoted proportional to the amplitude of the controlled inlet oscillations within the trailing vortex rings.

The purpose of this paper is to control flow separation over a NACA 4415 airfoil by applying unsteady forces to the separated shear layers using dielectric barrier discharge (DBD) plasma actuators. This novel flow control method is studied under conditions which the airfoil angle of attack is 18°, and Reynolds number based on chord length is 5.5 × 10⁵.

Large eddy simulation of the turbulent flow is used to capture vortical structures through the airfoil wake. Power spectral density analysis of the baseline flow indicates dominant natural frequencies associated with “shear layer mode” and “wake mode.” The wake mode frequency is used simultaneously to excite separated shear layers at both the upper surface and the trailing edge of the airfoil (dual-position excitation), and it is also used singly to excite the upper surface shear layer (single-position excitation).

Based on the results, actuations manipulate the shear layers instabilities and change the wake patterns considerably. It is revealed that in the single-position excitation case, the vortices shed from the upper surface shear layer are more coherent than the dual-position excitation case. The maximum value of lift coefficient and lift-to-drag ratio is achieved, respectively, by single-position excitation as well as dual-position excitation.

The paper contributes to the understanding and progress of DBD plasma actuators for flow control applications. Further, this research could be a beneficial solution for the promising design of advanced low speed flying vehicles.

The purpose of this paper is to present and discuss in detail the design approach to shear buckling resistance evaluation for corrugated web being a part of a steel beam exposed to fire.

It is based on the interaction between the local and global elastic instability failure modes as well as on the possible yielding of the whole web cross-section during fire.

New formulae, adequate for specification of the suitable shear buckling coefficients, depend not only on the web slenderness but also on the temperature of structural steel.

The methodology proposed by the authors can be added to the current European standard recommendations given in EN 1993-1-2 as a well-justified design algorithm helpful in reliable evaluation of a safety level for steel beams with slender corrugated webs subject to fire exposure. It seems to be highly desirable because, at present, there are no detailed instructions in this field.

IN Part I of this paper, the basic equations were established for the various modes of instability of flat sandwich panels subjected to lengthwise compression. Whilst these equations are valuable in determining the strength of a given panel they do not give a direct indication of the cross‐sectional dimensions of a panel required to carry a given load, especially if the panel is to be the optimum, i.e. of minimum weight.

Numerical simulations are performed for studying the vorticity dynamics of a dipole colliding with the wall in a bounded flow and the wake structure and separated flow properties past a circular cylinder at the values of Reynolds numbers.

The near wake statistics of separated fluid flows are investigated by using the lattice Boltzmann method (LBM) in a two-dimensional framework. A multi-block technique is applied to accurately resolve the flow characteristics by the grid refinement near the wall and preserve the stability of the numerical solution at relatively high Reynolds numbers.

The results show that the rolling-up of the boundary layer occurs due to the shear-layer instabilities near the surface which causes a boundary layer detachment from the wall and consequently leads to the formation of small-scale vortices. These shear-layer vortices shed at higher frequencies than the large-scale Strouhal vortices which result in small-scale high-frequency fluctuations in the velocity field in the very near wake. The present study also demonstrates that the efficiency of the multi-block LBM used for predicting the statistical features of flow problems is comparable with the solvers based on the Navier-Stokes equations.

Studying the separated flow characteristics in aerospace applications.

Applying a multi-block lattice Boltzmann method (LBM) for simulation of separated fluid flows at high-Reynolds numbers. Studying of the near wake statistics of unsteady separated fluid flows using the multi-block LBM. Comparison of flow characteristics obtained based on the LBM with those of reported based on the Navier-Stokes equations.

The purpose of this study illustrates the morphing effects around a large-scale high-lift configuration of the Airbus A320 with two elements airfoil-flap in the take-off position. The flow around the airfoil-flap and the near wake are analysed in the static case and under time-dependent vibration of the flap trailing-edge known as the dynamic morphing.

Experimental results obtained in the subsonic wind tunnel S1 of Institut de Mécanique des Fluides de Toulouse of a single wing are discussed with high-fidelity numerical results obtained by using the Navier–Stokes multi-block (NSMB) code with advanced turbulent modelling able to capture the predominant instabilities and coherent structure dynamics. An explanation of the dynamic time-dependent grid deformation is provided, which is used in the NSMB code to simulate the flap’s trailing-edge deformation in the morphing configuration. Finally, power spectral density is performed to reveal the coherent wake structures and their modification because of the morphing.

Frequency of vibration and amplitude of deformation effects are investigated for different morphing cases. Optimal morphing regions at a specific frequency and a slight deformation were able to attenuate the predominant natural shear-layer frequency and to considerably decrease the width of the von Kármán vortices with a simultaneous increase of aerodynamic performances.

The new concept of future morphed wings is proposed for a large scale A320 prototype at the take-off position. The dynamic morphing of the flap’s trailing-edge is simulated for the first time for high-lift two-element configuration. In addition, the wake analysis performed helped to show the turbulent structures according to the organised eddy simulation model.