Search results

In this paper, we evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

We employ a Dynamic GTAP-VA Model to quantitatively evaluate the economic repercussions of the “Chip Act” on the Chinese electronic industries' GVC participation from 2023 to 2040.

The findings depict a discernible contraction in China’s electronic sector by 2040, marked by a −2.95% change in output, a −3.50% alteration in exports and a 0.45% increment in imports. Concurrently, the U.S., EU and certain Asian economies exhibit expansions within the electronic sector, indicating a GVC realignment. The “Chip Act” implementation precipitates a significant divergence in GVC participation across different countries and industries, notably impacting the electronics sector.

Through a meticulous temporal analysis, this manuscript unveils the nuanced economic shifts within the GVC, substantially bridging the empirical void in existing literature. This narrative accentuates the profound implications of policy regulations on global trade dynamics, contributing to the discourse on international economic policy and industry evolution.

We evaluated the impact of the US “Chip Act” on the participation of the Chinese electronics industry in the global value chain based on the dynamic CGE model. This is a meaningful attempt to use the GTAP-VA model to analyze the electronics industry in China.

The interaction between policy regulations and global value chain (GVC) dynamics is pivotal in understanding the contemporary global trade framework, especially within technology-driven sectors. The US “Chips Act” represents a significant regulatory milestone with potential ramifications on the Chinese electronic industries' engagement in the GVC.

The significance of this paper is that it quantifies for the first time the impact of the US Chip Act on the GVC participation index of East Asian countries in the context of US-China decoupling. With careful consideration of strategic aspects, this paper substantially fills the empirical gap in the existing literature by presenting subtle economic changes within GVCs, highlighting the profound implications of policy regulation on global trade dynamics.

A real-time production scheduling method for semiconductor back-end manufacturing process becomes increasingly important in industry 4.0. Semiconductor back-end manufacturing process is always accompanied by order splitting and merging; besides, in each stage of the process, there are always multiple machine groups that have different production capabilities and capacities. This paper studies a multi-agent based scheduling architecture for the radio frequency identification (RFID)-enabled semiconductor back-end shopfloor, which integrates not only manufacturing resources but also human factors.

The architecture includes a task management (TM) agent, a staff instruction (SI) agent, a task scheduling (TS) agent, an information management center (IMC), machine group (MG) agent and a production monitoring (PM) agent. Then, based on the architecture, the authors developed a scheduling method consisting of capability & capacity planning and machine configuration modules in the TS agent.

The authors used greedy policy to assign each order to the appropriate machine groups based on the real-time utilization ration of each MG in the capability & capacity (C&C) planning module, and used a partial swarm optimization (PSO) algorithm to schedule each splitting job to the identified machine based on the C&C planning results. At last, we conducted a case study to demonstrate the proposed multi-agent based real-time production scheduling models and methods.

This paper proposes a multi-agent based real-time scheduling framework for semiconductor back-end industry. A C&C planning and a machine configuration algorithm are developed, respectively. The paper provides a feasible solution for semiconductor back-end manufacturing process to realize real-time scheduling.

The integration of the digital economy and the real economy has been a key focus in promoting digital economic development. It denotes a comprehensive digital transformation of national economic activities regarding technological infrastructure and production modes, which is crucial for establishing a modern economic system, advancing industrial infrastructure and modernizing industrial chains.

Firstly, the study delves into the internal logic behind the emergence of the new development dynamic resulting from digital technology's evolution. Secondly, it explores the mechanism of mutual promotion and support between the new development dynamic and the digital economy based on China's shift in focus from international engagement to the domestic economy during different stages of industrialization. Subsequently, it analyzes the characteristics and critical factors of digital economy development and examines the macro-, meso- and micro-level constraints on these factors. Finally, the paper explores approaches to promoting digital economy development while constructing the new development dynamic and provides relevant policy suggestions.

The construction of the new development dynamic and the development of the digital economy are inextricably linked, and only by mutually reinforcing each other can they provide an inexhaustible impetus for China's high-quality economic development.

The new development dynamic and the digital economy development form an indivisible whole. The new development dynamic creates the necessary conditions for digital economy development and promotes the formation of digital production modes. In turn, the development of the digital economy should strive to improve the mainstay position of the domestic economy, enhance the synergy between the domestic economy and international engagement, upgrade value chains while improving the supply and the industrial chains in China and ensure a parallel increase in labor income alongside improved productivity.

This research aims to examine the US–China policy shift from Obama to Biden emphasizing the centrality of Taiwan question in the geostrategic competition with Beijing and its prospect if the US strategy remains unchanged.

A conceptual framework is outlined, illustrating how the US grand strategy is driven by the ideological foundation of Exceptionalism. The paper highlights the associated US policy changes that evolved from Obama to Trump and then Biden to advance Washington's strategic interests in its rivalry with China over Taiwan.

Biden's policy led to an escalating geopolitical competition with Beijing over Taiwan to maintain US supremacy. The Biden administration is more stringent than the previous administrations on the Taiwan question and there is the conviction that the USA must not back down on Taiwan because the alternative will be a retraction of US world primacy to Beijing. With Washington's persistent hegemonic strategy, the US–China confrontation over Taiwan seems inevitable.

The research highlights how the Biden administration managed a perpetuated Ukraine crisis and forged unprecedented high-level ties with Taiwan, indicating the administration's determination to exacerbate contentions with Beijing over Taiwan rather than de-escalate.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

The purpse of this study is to examine sustainable technology development (STD) during the “Valley of Death” phase encountered by university startups undertaking intellectual property rights (IPR) commercialisation.

A comprehensive literature review was conducted after searching for relevant documents across multiple databases. Semi-structured interviews with university startup founders were also conducted as part of a qualitative case study.

This study resulted in two significant findings. First, the Valley of Death has been redefined in the specific context of IPR commercialisation by university startups. Second, the sustainable technology development framework (STDF) has been conceptualised to enhance the success rate of IPR commercialisation by university startups. The authors also identified three essential components of STD in the context of university startups: market development, technical efficiency and business sustainability.

This exploratory research involved a thorough literature analysis. Given that only one qualitative case study was conducted, data saturation was not achieved. Further empirical research is needed to validate the conceptualised STDF.

The validated STDF will be a useful tool for enhancing the success of IPR commercialisation by university startups.

While others have focused on innovating business models, this study focused on an underexplored area: the sustainability of technology development during the commercialisation of IPR by university startups during the Valley of Death phase.

This article aims to understand where industry is in terms of digitalizing their operations, what features of this transformation are essential for practitioners, and what barriers they are facing during their journey. In addition, the authors aim to provide recommendations for organization to start their digital transformation.

Through literature review, the authors summarize the emerging tools and technologies in operations and supply chains to inform the practitioners. Then, the authors use surveys conducted on 183 operations and supply chain professionals, and use statistical tools to examine the association between variables of the data set. The authors present real-life case studies to explain important steps of a digital transformation project.

The survey results indicate that real-time monitoring and data analytics are viewed as the most important and needed tools for organizations. High cost, lack of stakeholder buy-in and lack of successful business use cases are major barriers for companies when starting a digital transformation.

The authors provide recommendations for practitioners based on the survey responses, and outline that starting small, focusing on stakeholder buy-in and implementation of software are the three key steps for a successful transformation journey.

Main contributions of this article are to understand practitioner perspectives in digitalization and provide guidelines for organizations to follow when transforming their operations. This research closes the gap between academic research and practice by collaborating with operations and supply chain professionals.

This study aims to explore how manufacturing firms master customer lock-in through value creation by servitization innovation strategies from the perspective of asset specificity.

A multiple case study with triangulation fashion is adopted to identify servitization innovation strategies. Several manufacturing firms were investigated, which are distributed in different positions of the value chain. Content analysis and abductive approaches are adopted to analyze the data. Moreover, an in-depth interview and participatory observation were conducted to refine the analysis results.

This study identified four different focusing points of servitization operations. Based on these, the paper further induces an innovative servitization strategy matrix of customer lock-in, concerning communion, intellectual, existential and insubstantial strategies. Furthermore, a conceptual model of customer lock-in by servitization innovation from the perspective of asset specificity is elaborated. It is suggested that companies can use tangible or intangible resources by sharing or storing operations to create servitization value.

This study theoretically proposes a conceptual model to extend servitization innovation as an intangible asset and adopt the new perspective of asset specificity to illustrate the value creation in servitization to generate customer lock-in.