Search results

Three different configurations of vertical axis wind turbines (VAWT) were fabricated by changing the storey height and their orientations. The purpose of this study is to find the effect of storey height and orientation on the performance of wind turbines. The multistory VAWT has three storeys. The first configuration had increased middle storey height, with 0–90-0 orientation of blades. Wherein the second turbine had equal storey heights. The third configuration had increased middle storey height with 0–120-240 orientation of blades. The blades were tested numerically and experimentally.

In this research work, prototypes of innovative multistory VAWT were built with different configurations and orientations. Three configurations of three-storey VAWT were fabricated by varying the height of storey of turbines. The orientations were made by keeping the storeys orthogonal to each other. Multistory VAWT was tested numerically and experimentally. ANSYS Fluent was used for computational fluid dynamic analysis of VAWT. K-epsilon model was used for numerical analysis of wind turbine. Experimentation was carried out in a wind tunnel for different tip speed ratios (TSR).

The three configurations of innovative multistory VAWT were tested numerically and experimentally for different TSR. It has been found that the VAWT with equal storey height had a better performance as compared to the other two configurations with increased middle storey height. The power coefficient of equal storey height VAWT was about 22%, wherein the power coefficient of turbines with reduced upper and lower storey height was between 5%–8%.

The research work of multi-storey VAWT is very novel and original. The findings of the research will contribute to the existing work done in the field of VAWT. This will help other researchers to have insight into the development of multistory VAWT. The effect of storey height and configuration of multi-storey VAWT is studied numerically and experimentally, which concludes that the performance of equal storey is superior as compared to other configurations.

The multi-storey concept of VAWT was developed to counter the problem of wind direction. The blades of each storey were arranged orthogonal to each other. This helped to harness wind power irrespective of the direction of the wind. This will make the VAWT more sustainable and financially viable for domestic use.

The turbines are specially designed for remotely located housed in rural areas where the power grid is not yet reached. Users can install the turbine on their rooftop and harness wind power of 100 W capacity. This will help them to make their life easy.

This research work is very original and first of a kind. The multistory concept of the wind turbine was checked for the effect of storey height and orientations of blades on its performance. Different configurations and orientations of the vertical axis were designed and developed for the first time.

The time‐stepping finite method of transient analysis in permanent magnet synchronous machines has been presented. This method has been used for determining the steady‐state and dynamic performance of the permanent magnet self‐starting synchronous motor. The movement of the rotor, the saturation of the ferromagnetic core, the properties of permanent magnet and eddy currents in the solid bars of the cage winding have been taken into account.

Development of the Lockheed supersonic transport has followed the basic philosophy that an advance in air travel in terms of speed and economics should be accompanied by similar advances in aeroplane safety and flying qualities. To achieve these objectives, Lockheed's SST design work has been concentrated for many years on the development of a fixed‐wing design. The present configuration—called a double delta—provides a simple high lift system with low wing loading, excellent low speed stability and control, and large favourable ground effects in landing, with inherent advances in operational simplicity and safety.

Nowadays flaps and winglets are one of the main mechanisms to increase airfoil efficiency. This study aims to investigate the power performance of vertical axis wind turbines (VAWT) that are equipped with diverse gurney flaps. This study could play a crucial role in the design of the VAWT in the future.

In this paper, the two-dimensional computational fluid dynamics simulation is used. The second-order finite volume method is used for the discretization of the governing equations.

The results show that the gurney flap enhances the power coefficient at the low range of tip speed ratio (TSR). When an angled and standard gurney flap case has the same aerodynamic performance, an angled gurney flap case has a lower hinge moment on the junction of airfoil and gurney flap which shows the structural excellence of this case. In all gurney flap cases, the power coefficient increases by an average of 20% at the TSR range of 0.6 to 1.8. The gurney flap cases do not perform well at the high TSR range and the results show a lower amount of power coefficient compare to the clean airfoil.

The angled gurney flap which has the structural advantage and is deployed to the pressure side of the airfoil improves the efficiency of VAWT at the low and medium range of TSR. This study recommends using a controllable gurney flap which could be deployed at a certain amount of TSR.

SOME of the major problems under investigation by the National Advisory Committee for Aeronautics may be placed under the general heading of safety in flight. One of the most important of these problems is the study of spinning, both in the wind tunnel and in free flight. In the usual horizontal type of wind tunnel, however, considerable difficulty is encountered in making spinning tests of aeroplane models, owing to the force of gravity acting with the rotation for part of a revolution and against the rotation for the remainder. This condition tends to give oscillating readings on the measuring apparatus and can be avoided only by very careful counterbalancing of the spinning model and balance parts. This undesirable feature can be overcome by locating the spin axis in the vertical rather than in the horizontal position, because the effect of gravity on the spin apparatus is then constant. In addition, a vertical type of tunnel requires much less floor space than the horizontal type of the same jet diameter.

This paper aims to design an optimum vertical axis wind turbine (VAWT) and assess its techno-economic performance for wind energy harvesting at high-speed railway in Malaysia.

This project adopted AutoCAD and ANSYS modeling tools to design and optimize the blade of the turbine. The site selected has a railway of 30 km with six stops. The vertical turbines are placed 1 m apart from each other considering the optimum tip speed ratio. The power produced and net present value had been analyzed to evaluate its techno-economic viability.

Computational fluid dynamics (CFD) analysis of National Advisory Committee for Aeronautics (NACA) 0020 blade has been carried out. For a turbine with wind speed of 50 m/s and swept area of 8 m², the power generated is 245 kW. For eight trains that operate for 19 h/day with an interval of 30 min in nonpeak hours and 15 min in peak hours, total energy generated is 66 MWh/day. The average cost saved by the train stations is RM 16.7 mil/year with battery charging capacity of 12 h/day.

Wind energy harvesting is not commonly used in Malaysia due to its low wind speed ranging from 1.5 to 4.5 m/s. Conventional wind turbine requires a minimum cut-in wind speed of 11 m/s to overcome the inertia and starts generating power. Hence, this paper proposes an optimum design of VAWT to harvest an unconventional untapped wind sources from railway. The research finding complements the alternate energy harvesting technologies which can serve as reference for countries which experienced similar geographic constraints.

The purpose of the paper is to predict the aerodynamic performance of a complete scale model H-Darrieus vertical axis wind turbine (VAWT) with end plates at different operating conditions. This paper aims at understanding the flow physics around a model VAWT for three different tip speed ratios corresponding to three different flow regimes.

This study achieves a first three-dimensional hybrid lattice Boltzmann method/very large eddy simulation (LBM-VLES) model for a complete scaled model VAWT with end plates and mast using the solver PowerFLOW. The power curve predicted from the numerical simulations is compared with the experimental data collected at Erlangen University. This study highlights the complexity of the turbulent flow features that are seen at three different operational regimes of the turbine using instantaneous flow structures, mean velocity, pressure iso-contours, blade loading and skin friction plots.

The power curve predicted using the LBM-VLES approach and setup provides a good overall match with the experimental power curve, with the peak and drop after the operational point being captured. Variable turbulent flow structures are seen over the azimuthal revolution that depends on the tip speed ratio (TSR). Significant dynamic stall structures are seen in the upwind phase and at the end of the downwind phase of rotation in the deep stall regime. Strong blade wake interactions and turbulent flow structures are seen inside the rotor at higher TSRs.

The computational cost and time for such high-fidelity simulations using the LBM-VLES remains expensive. Each simulation requires around a week using supercomputing facilities. Further studies need to be performed to improve analytical VAWT models using inputs/calibration from high fidelity simulation databases. As a future work, the impact of turbulent and nonuniform inflow conditions that are more representative of a typical urban environment also needs to be investigated.

The LBM methodology is shown to be a reliable approach for VAWT power prediction. Dynamic stall and blade wake interactions reduce the aerodynamic performance of a VAWT. An ideal operation close to the peak of the power curve should be favored based on the local wind resource, as this point exhibits a smoother variation of forces improving operational performance. The 3D flow features also exhibit a significant wake asymmetry that could impact the optimal layout of VAWT clusters to increase their power density. The present work also highlights the importance of 3D simulations of the complete model including the support structures such as end plates and mast.

Accurate predictions of power performance for Darrieus VAWTs could help in better siting of wind turbines thus improving return of investment and reducing levelized cost of energy. It could promote the development of onsite electricity generation, especially for industrial sites/urban areas and renew interest for VAWT wind farms.

A first high-fidelity simulation of a complete VAWT with end plates and supporting structures has been performed using the LBM approach and compared with experimental data. The 3D flow physics has been analyzed at different operating regimes of the turbine. These physical insights and prediction capabilities of this approach could be useful for commercial VAWT manufacturers.

One of the most significant challenges facing contemporary architectural and urban design is how it can become more sustainable. Energy consumption by housing is a major source of greenhouse gas emissions and a cause of depletion of non-renewable energy sources. Of particular concern is existing stock, which has the worst performance and is hardest to improve.

One means of addressing these issues that is attracting increasing interest is the integration of embedded renewable energy technologies. This paper discusses the use of wind turbines on buildings as a response to climate change legislation. It examines the potential for embedded generation in a specific built form (existing high rise housing) and places this in the context of a particular geographical location (Glasgow, Scotland) where the existing provision is highly problematic, but which also presents significant potential. It describes findings from two projects in Glasgow, a pilot installation on a city centre multi-storey block, and subsequent feasibility study for a Housing Association managed multi-storey block and identifies the problems and opportunities that may be applied in similar projects elsewhere.

The purpose of this paper is to elaborate the methodology and software for the optimization of rotor structure of the line-start permanent magnet synchronous motor (LSPMSM). To prove usefulness of presented approach the case study problem has been solved.

The modified particle swarm optimization (PSO) algorithm has been employed for the optimization of LSPMSM. The optimization solver has been elaborated in Delphi environment. The software consists of two modules: an optimization solver and a numerical model of LSPMSM. The model of the considered machine has been developed in the ANSYS Maxwell environment. In the optimization procedure the objective function has been based on maximizing efficiency and power factor.

Obtained results show that modified PSO algorithm can be successfully applied for the optimization of the rotor structure of LSPMSM. This software can be used as a design tool to improve the performance of LSPMSM. The results of studied case problem illustrate that it is possible to optimize rotor of LSPMSM to achieve good self-starting properties with simultaneous minimization of usage of permanent magnet material.

Both, the simpler lumped parameters model and more advanced field model of the motor were tested. Presented comparison to the results of the finite element analysis (FEA) shows that for considered in the paper the case study problem the accuracy of circuit model is acceptable.

Presented approach and developed software can be used as an effective design tool to improve the performance of LSPMSM.

The paper offers appropriate approach for optimizing the permanent magnet synchronous motors having ability to start by direct connection to the grid.