Search results

This study aims to investigate the effects of graphite-MoS₂ composite solid lubricant on the tribological properties of copper-based bearing materials under dry conditions.

The mixture of Graphite-MoS₂ was inlaid in ZQSn6-6–3 tin bronze and ZQAl9-4 aluminum bronze matrix. These copper-embedded self-lubricating bearing materials were considered in friction pairs with 2Cr13 stainless steel, and their tribological properties were studied by using an MM200 wear test machine.

The results show that the friction coefficients and wear rates of copper-embedded self-lubricating bearing materials are lower than those of the ordinary copper-based bearing materials. The wear performance of the tin bronze inlaid self-lubricating bearing material is better than that of the aluminum bronze inlaid self-lubricating bearing material. The wear mechanism of the tin bronze bearing material is mainly adhesive wear, and that of the aluminum bronze bearing material is mainly grinding wear, oxidation wear and adhesive wear. The copper-embedded self-lubricating bearing materials had no obvious abrasion, whereas the aluminum bronze inlaid self-lubricating bearing material exhibited deep furrows and obvious abrasion under high loads.

These results are helpful for the application of copper-embedded self-lubricating bearing materials.

The fabric self-lubricating liners are the key factors impacting the performances of self-lubricating spherical plain bearings. The purpose of this paper is to improve the friction and wear properties of self-lubricating radial spherical plain bearings by modification of the liners.

The liners of hybrid woven PTFE/Kevlar fabrics were treated respectively by the LaCl₃ and CeO₂ solutions. The tribological properties of self-lubricating spherical plain bearings with treated or untreated liners under continuous swaying conditions were investigated with the bearing tester at the swaying frequency of 2.5 Hz and the swaying angle of ±10°. The film formation and wear mechanisms were analyzed based on the observation of worn surfaces with a scanning electron microscope (SEM) and an energy dispersive spectrometer (EDS).

Results show that the tribological properties of the bearings treated by the LaCl₃ or CeO₂ solution were improved compared with those of the untreated bearings. In particular, the wear resistance of bearings treated by the CeO₂ solution was remarkably improved under higher swaying cycles, but the anti-friction properties and cooling effects of bearings treated by the LaCl₃ solution were better under lower swaying cycles. Through SEM analysis, the reasons were analyzed. The bearings with treated liners only produced slight adhesive and abrasive wear, but the bearings with untreated liners produced more serious adhesive and abrasive wear under higher swaying cycles.

The paper proposed a new pretreatment process for the self-lubricating liners. The investigation on the friction and wear behaviors of the bearings is beneficial for prolonging the service lives of the radial spherical plain bearings.

This paper aims to explore the possibility of converting the nitrile butadiene rubber (NBR) water-lubricated bearing material into a self-lubricating bearing material by the action of polytetrafluoroethylene (PTFE) particles and water lubrication.

A group of experimental studies was carried out on a ring-on-block friction test. The physical properties, tribological properties and interface structure of PTFE-NBR self-lubricating composites filled with different percentages of PTFE particles were investigated.

The experimental results indicated that the reduction in friction and wear is a result of the formation of the lubricating film on the surface of the composites. The lubricating film was formed of a large amount of PTFE particles continuously supplied under water lubrication conditions and the PTFE particles here can greatly enhance the load capacity and lubrication performance.

In this study, the tribological properties of PTFE particles added to the NBR water-lubricated bearing materials under water lubrication were investigated experimentally, and the research was carried out by a ring-on-block friction test. It is believed that this study can provide some guidance for the application of PTFE-NBR self-lubricating.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0187/

The purpose of this paper is to develop a new type of embedded solid self-lubricating thrust ball bearing for conditions where grease lubrication cannot be used and to analyze its tribological performance under different lubrication characteristics (lubrication position, width and filling amount).

Lubrication parameters such as position (a), width (W) and filling amount (Q) were considered. Grooves were made on the raceway with a fiber laser and solid self-lubricating materials were applied through scraping. The frictional behavior of the new bearing was analyzed using a vertical test rig and the bearing’s surface topography was examined with a noncontact profilometer to study wear mechanisms.

The new inlay thrust ball bearings exhibited excellent lubrication effects and effectively controlled the temperature rise of the bearings. When a is 0 degrees, W is 0.5 mm and Q is 16 mg, the bearing experiences the least wear, and the friction coefficient and temperature are the lowest, measuring 0.001 and 41.52 degrees, respectively. Under the same experimental conditions, compared to smooth bearings without solid lubrication, the friction coefficient decreased by 96.88% and the temperature decreased by 59.74%.

This study presents a self-lubricating thrust ball bearing designed for conditions where grease lubrication is not feasible. A comprehensive investigation was conducted on its surface morphology, wear mechanisms and tribological performance. This work provides valuable insights into the research of self-lubricating thrust ball bearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0073/

Dr D. C. EVANS looks at some of the options open in selecting a plain‐bearing arrangement designed to operate where an external lubricant supply cannot be incorporated for reasons of environment or expediency.

The purpose of this study was to solve the problem of most woven-fabric self-lubricating bearings that find it difficult to function at temperatures above 320°C, by designing a new type of new nuclear joint bearing. The results of this study will help designers to achieve accurate stress distribution, displacement deformation, fatigue life and damage of bearings. All of these can be a guide for designing self-lubricating joint bearings.

Finite element analysis is undertaken to simulate the new design bearings. To get the most appropriate and accurate results, the room temperature simulation (Simulation A), the modulus of elasticity that changes with temperature (Simulation B) and the thermal-structure-coupled simulation (Simulation C) are compared. The fatigue simulation is conducted to verify whether the self-lubricating method is reasonable and whether the bearing can function for over 60 years in an enclosed environment.

Stress distribution and displacement deformation of joint bearing can be accurately achieved via the thermal-structure coupled simulation. Work life and damage results have been achieved via the fatigue analysis, and the suggested working loads can be calculated via safety factors.

The newly designed joint bearing in which the graphite is laid on the outside of the inner ring functions and self-lubricates at temperatures above 320°C.

For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation.

An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes.

The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully.

As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

PLAIN, slide‐surface bearings were used right at the start of engineering practice, in the form of simple bushes. Whereas there is nowadays a very wide selection of bearings of more sophisticated types, it is a fact that sliding surface bearings are still employed extensively in many modern and exacting applications. The forms have, however, changed drastically over the years, and no longer is the sliding‐surface bearing limited in application to supporting properly aligned shafts under conditions where lubricant can be directed in copious amounts to the friction surfaces. The modern counterpart of the simple bush can be of spherical‐seating type if required, for accommodating shaft misalignment, and may be manufactured from so‐called ‘self‐lubricating’ materials.

The study aims to the distribution rule of lubricating oil film of full ceramic ball bearing and improve its performance and life.

The paper established an analysis model based on the fluid–solid conjugate heat transfer theory for full ceramic ball bearings. The distribution of flow, temperature and pressure field of bearings under variable working conditions is analyzed. Meanwhile, the mathematical model of elastohydrodynamic lubrication (EHL) of full ceramic ball bearings is established. The numerical analysis is used to study the influence of variable working conditions on the lubricant film thickness and pressure distribution of bearings. The temperature rise test of full ceramic ball bearing under oil lubrication was carried out to verify the correctness of simulation results.

As the speed increased, the oil volume fraction in full ceramic ball bearing decreased and the surface pressure of rolling element increased. The temperature rise of full ceramic ball bearings increases with increasing speed and load. The lubricant film thickness of full ceramic ball bearing is positively correlated with speed and negatively correlated with load. The pressure of lubricating film is positively correlated with speed and load. The test shows that the higher inner ring speed and radial load, the higher the steady-state temperature rise of full ceramic ball bearing. The test results are in high agreement with simulation results.

Based on the fluid–solid conjugate heat transfer theory and combined with Reynolds equation, lubricating oil film thickness formula, viscosity temperature and viscosity pressure formula. The thermal analysis model and EHL mathematical model of ceramic ball bearings are established. The flow field, temperature field and pressure field distribution of the full ceramic ball bearing are determined. And the thickness and pressure distribution of lubricating oil film in the contact area of full ceramic ball bearing were determined.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2023-0126/

A NEW COMPANY, the Non‐Metallic Bearings Company, a division of Lignum Vitae Products Corporation (established in 1890), is now producing a diversified group of non‐metallic products and specialising in self‐lubricating parts such as shafts, bobbins, value guides, vacuum and liquid seals, wear plates, cams, pinions, ball retainers, pivot bearings, worms, gears, nuts, and many industrial parts made to special order. Some of these parts are illustrated.