Search results

The purpose of this paper is to introduce an integrated laboratory experiment setup (ILES) to overcome problems encountered in open distance learning (ODL) especially when offering engineering degree programmes.

Engineering laboratory experiments can be classified as experiments which are performed with the intention to inculcate theory, and second, to provide hands-on experience. The ILES integrates both types of experiments with face-to-face laboratory (FFL), online remote laboratory (ORL), and multimedia demonstrations, and it helps to reduce traditional FFL duration by 50 per cent. The first phase of the ILES provides an opportunity to refer multimedia demonstrations of the experiments. Thereafter, students attend the first FFL session, which covers about 25 per cent of the experiments. In the next step, 50 per cent of the experiments are offered using the ORL, via the internet while interacting with real equipment and making actual observations. The final step is used to accomplish the rest of the experiments (25 per cent) in FFL which facilitates the clarification of any problem that may occur in the ORL.

This blended laboratory system will help to achieve ODL objectives while utilising resources productively and cost effectively. Having implemented the idea and based on the information received from the stakeholders, this has proved to be a workable solution to one of the difficulties faced by ODL students.

The level of outcome of the students has to be observed and analysed in comparison with the traditional laboratory setup.

Some experiments (e.g. thermodynamics) which need more safety precautions are difficult to offer via ORL.

The ILES is a blended setup including FFL, ORL and multimedia demonstrations and it is a novel concept which is most applicable to engineering/science programmes offered in ODL mode.

This study aims to identify informal institutions for bottom-of-the-pyramid (BoP) business models in the agricultural sector through the case study of banana growers’ cooperatives.

A case study of six banana cooperatives from Colombia was conducted. The research followed a mixed design, using both qualitative and quantitative data and the application of structural equations.

This study shows that social capital, networking and alliances are essential in BoP businesses.

Authors defined a model of informal institutional factors for the generation of economic and social value in inclusive business, using the new institutional theory and the conceptual development of BoP in agri-business.

This study aims to review recent advances towards the implementation of ANN and NLP applications during the budgeting phase of the construction process. During this phase, construction companies must assess the scope of each task and map the client’s expectations to an internal database of tasks, resources and costs. Quantity surveyors carry out this assessment manually with little to no computer aid, within very austere time constraints, even though these results determine the company’s bid quality and are contractually binding.

This paper seeks to compile applications of machine learning (ML) and natural language processing in the architectural engineering and construction sector to find which methodologies can assist this assessment. The paper carries out a systematic literature review, following the preferred reporting items for systematic reviews and meta-analyses guidelines, to survey the main scientific contributions within the topic of text classification (TC) for budgeting in construction.

This work concludes that it is necessary to develop data sets that represent the variety of tasks in construction, achieve higher accuracy algorithms, widen the scope of their application and reduce the need for expert validation of the results. Although full automation is not within reach in the short term, TC algorithms can provide helpful support tools.

Given the increasing interest in ML for construction and recent developments, the findings disclosed in this paper contribute to the body of knowledge, provide a more automated perspective on budgeting in construction and break ground for further implementation of text-based ML in budgeting for construction.

Building permitting is mostly a manual, labor intensive and time-consuming process. Initiatives for streamlining the process are not always helpful since they often fail to address the core problems within the process. A framework for modeling the permitting process can be useful to identify bottlenecks, core challenges and best practices. Hence, the authors aim to demonstrate and validate a previously suggested workflow for permit process modeling using the permitting process in Israel as a test case.

The authors implement qualitative expert interviews for data acquisition. The collected data are then processed for a qualitative data analysis. The results of the analysis are then validated using a focus group workshop in the field of building permits. In the test case the focus group consisted of Israeli experts.

The authors present a detailed overview of the as-is building permit process in Israel and the existing challenges. Through this test case, the authors found that the framework is applicable in different countries and that it can provide valuable insights into the core problems within the process. In addition, application of the same framework in different countries can provide comparable results that would allow the authors to identify best practices.

The major contribution of this work is the development and validation of a framework for building permitting process modeling which can be used to identify existing challenges and bottlenecks in the process. Implementing a structured and unified approach provides an opportunity to easily compare processes in different countries to identify best practices.

This study aims to explore and assess the key Sharīʿah governance factors that may have an influence on the internal Sharīʿah audit structure and its practices in Islamic financial Institutions in Yemen, particularly in the Islamic banking sector.

To do so, the study adopts a qualitative approach employing case study analysis, and both primary and secondary data are used to formulate the appropriate interview questions and achieve the objectives of the study.

The authors observed that the key factors that help in assessing the internal Sharīʿah audit structure and its practices are Sharīʿah auditor charter, audit plan and audit manual. In addition, the authors observed that, in general, internal Sharīʿah audit tends to be subjective in Yemeni banks because they depend on the internal Sharīʿah auditor’s qualifications and experience more than formal guidelines and regulations. This is because there are no detailed internal Sharīʿah audit plans or detailed audit manual. Moreover, the internal Sharīʿah auditor charter is not comprehensive in explaining the duties required of the internal Sharīʿah auditor, and it is mixed with the Sharīʿah Supervisory Board (SSB) duties. This means the internal Sharīʿah auditor lacks the critical tools that enable him to achieve the desired audit manual objectives where the effectiveness of internal Sharīʿah audit can be measured.

One of the important implications of this study is providing very important guidance about enhancing the areas where shortfalls are found within the Sharīʿah governance process in the Yemeni banking system. This enhancement process of the internal factors of Sharīʿah governance can be achieved by increasing the awareness of the enhancing internal Sharīʿah audit structure as it reflects ultimately on the internal Sharīʿah auditor’s role and his practices.

Understanding the effectiveness of internal Sharīʿah audit structure among internal auditors will improve the Sharīʿah audit framework standards, enhance the Sharīʿah knowledge among internal auditors and provide general guidelines to design audit programmes for Sharīʿah governance auditing process.

This study aims to model scale effects in nano-beams under torsion.

The elastostatic problem of a nano-beam is formulated by a novel stress-driven nonlocal approach.

Unlike the standard strain-driven nonlocal methodology, the proposed stress-driven nonlocal model is mathematically and mechanically consistent. The contributed results are useful for the design of modern devices at nanoscale.

The innovative stress-driven integral nonlocal model, recently proposed in literature for inflected nano-beams, is formulated in the present submission to study size-dependent torsional behavior of nano-beams.

Increasingly, interest in and the uptake of herbal infusions has advanced, namely, owing to their bioactive properties and potential links to health. Given this, the purpose of the present review was to collate evidence from human trials for five popular herbal infusions.

The systematic review comprised ten human trials (560 participants), investigating inter-relationships between herbal infusions consumption and health. Only human studies involving German chamomile (Matricaria chamomilla L. Asteraceae), ginger (Zingiber officinale Roscoe Zingiberaceae), lemon balm (Melissa officinalis L. Lamiaceae), peppermint (Mentha x spicata L. Lamiaceae)/spearmint (Mentha spicata L. Lamiaceae) and rosehip (Rosa canina L. Rosaceae) teas were included in the present paper.

Most herbal infusions serve as a good source of flavonoids and other polyphenols in the human diet. Studies included in this paper indicate that herbal infusions (1-3 cups tended to be drank daily; infusion rates up to 15 min) could benefit certain aspects of health. In particular, this includes aspects of sleep quality and glycaemic control (German chamomile), osteoarthritic stiffness and hormone control (spearmint), oxidative stress (lemon balm) and primary dysmenorrhea (rosehip).

Ongoing research is needed using homogenous herbal infusion forms, brewing rates and volumes of water to further reinforce these findings. In the meantime, herbal infusions could provide a useful supplementary approach to improving certain aspects of well-being.

The present paper collates evidence from human trials for five popular herbal infusions.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

The purpose of the study is to obtain and analyze vibro-acoustic characteristics.

A unified analysis model for the rotary composite laminated plate and conical–cylindrical double cavities coupled system is established. The related parameters of the unified model are determined by isoparametric transformation. The modified Fourier series are applied to construct the admissible displacement function and the sound pressure tolerance function of the coupled systems. The energy functional of the structure domain and acoustic field domain is established, respectively, and the structure–acoustic coupling potential energy is introduced to obtain the energy functional. Rayleigh–Ritz method was used to solve the energy functional.

The displacement and sound pressure response of the coupled systems are acquired by introducing the internal point sound source excitation, and the influence of relevant parameters of the coupled systems is researched. Through research, it is found that the impedance wall can reduce the amplitude of the sound pressure response and suppress the resonance of the coupled systems. Besides, the composite laminated plate has a good noise reduction effect.

This study can provide the theoretical guidance for vibration and noise reduction.