Search results
1 – 10 of 24Zaher Rahimi, Wojciech Sumelka and Xiao-Jun Yang
Recently, a new formulation has been introduced for non-local mechanics in terms of fractional calculus. Fractional calculus is a branch of mathematical analysis that studies the…
Abstract
Purpose
Recently, a new formulation has been introduced for non-local mechanics in terms of fractional calculus. Fractional calculus is a branch of mathematical analysis that studies the differential operators of an arbitrary (real or complex) order and is used successfully in various fields such as mathematics, science and engineering. The purpose of this paper is to introduce a new fractional non-local theory which may be applicable in various simple or complex mechanical problems.
Design/methodology/approach
In this paper (by using fractional calculus), a fractional non-local theory based on the conformable fractional derivative (CFD) definition is presented, which is a generalized form of the Eringen non-local theory (ENT). The theory contains two free parameters: the fractional parameter which controls the stress gradient order in the constitutive relation and could be an integer and a non-integer and the non-local parameter to consider the small-scale effect in the micron and the sub-micron scales. The non-linear governing equation is solved by the Galerkin and the parameter expansion methods. The non-linearity of the governing equation is due to the presence of von-Kármán non-linearity and CFD definition.
Findings
The theory has been used to study linear and non-linear free vibration of the simply-supported (S-S) and the clamped-free (C-F) nano beams and then the influence of the fractional and the non-local parameters has been shown on the linear and non-linear frequency ratio.
Originality/value
A new parameter of the theory (the fractional parameter) makes the modeling more fixable – this model can conclude all of integer and non-integer operators and is not limited to special operators such as ENT. In other words, it allows us to use more sophisticated mathematics to model physical phenomena. On the other hand, in the comparison of classic fractional non-local theory, the theory applicable in various simple or complex mechanical problems may be used because of simpler forms of the governing equation owing to the use of CFD definition.
Details
Keywords
Raffaele Barretta, Luciano Feo, Raimondo Luciano, Francesco Marotti de Sciarra and Rosa Penna
This study aims to model scale effects in nano-beams under torsion.
Abstract
Purpose
This study aims to model scale effects in nano-beams under torsion.
Design/methodology/approach
The elastostatic problem of a nano-beam is formulated by a novel stress-driven nonlocal approach.
Findings
Unlike the standard strain-driven nonlocal methodology, the proposed stress-driven nonlocal model is mathematically and mechanically consistent. The contributed results are useful for the design of modern devices at nanoscale.
Originality/value
The innovative stress-driven integral nonlocal model, recently proposed in literature for inflected nano-beams, is formulated in the present submission to study size-dependent torsional behavior of nano-beams.
Details
Keywords
The purpose of this paper is to study the buckling and the vibration of the beam induced by atom/molecule adsorption using the nonlocal Euler‐Bernoulli beam model with initial…
Abstract
Purpose
The purpose of this paper is to study the buckling and the vibration of the beam induced by atom/molecule adsorption using the nonlocal Euler‐Bernoulli beam model with initial axial stress.
Design/methodology/approach
The nonlocal parameter associated with adsorbed mass and bending rigidity variations of the beam induced by adsorbates are taken into account, and the buckling and dynamic behaviors are obtained via the Hamilton's principle, in which the potential energy between adsorbates and surfaces of the beam, the bending energy, the external work and the kinetic energy are summed as the Lagrangian function.
Findings
The results show that, for both buckling and resonant frequency, the nonlocal effect should be considered when the beam scales down to several hundreds of nanometres, especially for higher mode numbers.
Originality/value
The present paper gives the exact expressions for the buckling and resonant frequency of a simple‐supported nonlocal beam with initial axial stress. Different from previous works, the mass increasing and bending rigidity of the beam are found size‐dependent (nonlocal effect), resulting in possible different static and dynamic behaviors of the beam when atom/molecular adsorption occurs. The exact expressions obtained for the buckling and resonant frequency may be helpful to the design and application of micro‐ and nanobeam‐based sensors/resonators.
Details
Keywords
Amir Norouzzadeh, Mohammad Faraji Oskouie, Reza Ansari and Hessam Rouhi
This paper aims to combine Eringen’s micromorphic and nonlocal theories and thus develop a comprehensive size-dependent beam model capable of capturing the effects of…
Abstract
Purpose
This paper aims to combine Eringen’s micromorphic and nonlocal theories and thus develop a comprehensive size-dependent beam model capable of capturing the effects of micro-rotational/stretch/shear degrees of freedom of material particles and nonlocality simultaneously.
Design/methodology/approach
To consider nonlocal influences, both integral (original) and differential versions of Eringen’s nonlocal theory are used. Accordingly, integral nonlocal-micromorphic and differential nonlocal-micromorphic beam models are formulated using matrix-vector relations, which are suitable for implementing in numerical approaches. A finite element (FE) formulation is also provided to solve the obtained equilibrium equations in the variational form. Timoshenko micro-/nano-beams with different boundary conditions are selected as the problem under study whose static bending is addressed.
Findings
It was shown that the paradox related to the clamped-free beam is resolved by the present integral nonlocal-micromorphic model. It was also indicated that the nonlocal effect captured by the integral model is more pronounced than that by its differential counterpart. Moreover, it was revealed that by the present approach, the softening and hardening effects, respectively, originated from the nonlocal and micromorphic theories can be considered simultaneously.
Originality/value
Developing a hybrid size-dependent Timoshenko beam model including micromorphic and nonlocal effects. Considering the nonlocal effect based on both Eringen’s integral and differential models proposing an FE approach to solve the bending problem, and resolving the paradox related to nanocantilever.
Details
Keywords
Ahmed Bekhadda, Ismail Bensaid, Abdelmadjid Cheikh and Bachir Kerboua
The purpose of this paper is to study the static buckling and free vibration of continuously graded ceramic-metal beams by employing a refined higher-order shear deformation…
Abstract
Purpose
The purpose of this paper is to study the static buckling and free vibration of continuously graded ceramic-metal beams by employing a refined higher-order shear deformation, which is also the primary goal of this paper.
Design/methodology/approach
The proposed model is able to catch both the microstructural and shear deformation impacts without employing any shear correction factors, due to the realistic distribution of transverse shear stresses. The material properties are supposed to vary across the thickness direction in a graded form and are estimated by a power-law model. The equations of motion and related boundary conditions are extracted using Hamilton’s principle and then resolved by analytical solutions for calculating the critical buckling loads and natural frequencies.
Findings
The obtained results are checked and compared with those of other theories that exist in the literature. At last, a parametric study is provided to exhibit the influence of different parameters such as the power-law index, beam geometrical parameters, modulus ratio and axial load on the dynamic and buckling characteristics of FG beams.
Originality/value
Searching in the literature and to the best of the authors’ knowledge, there are limited works that consider the coupled effect between the vibration and the axial load of FG beams based on new four-variable refined beam theory. In comparison with a beam model, the number of unknown variables resulting is only four in the general cases, as against five in the case of other shear deformation theories. The actual model represents a real distribution of transverse shear effects besides a parabolic arrangement of the transverse shear strains over the thickness of the beam, so it is needless to use of any shear correction factors.
Bijan Mohamadi, S. Ali Eftekhari and Davood Toghraie
The purpose of this paper is to investigate nonlinear vibrations of triple-walled carbon nanotubes buried within Pasternak foundation carrying viscous fluids.
Abstract
Purpose
The purpose of this paper is to investigate nonlinear vibrations of triple-walled carbon nanotubes buried within Pasternak foundation carrying viscous fluids.
Design/methodology/approach
Considering the geometry of nanotubes, the governing equations were initially derived using Timoshenko and modified couple stress theories and by taking into account Von-Karman expressions. Then, by determining boundary conditions, type of fluid motion, Knudsen number and, ultimately, fluid viscosity, the principal equation was solved using differential quadrature method, and linear and nonlinear nanotube frequencies were calculated.
Findings
The results indicated that natural frequency is decreased as the fluid velocity and aspect ratio increase. Moreover, as the aspect ratio is increased, the results converge for simple and fixed support boundary conditions, and the ratio of nonlinear to linear frequencies approaches. Natural frequency of vibrations and critical velocity increase as Pasternak coefficient and characteristic length increase. As indicated by the results, by assuming a non-uniform velocity for the fluid and a slip boundary condition at Kn = 0.05, reductions of 10.714 and 28.714% were observed in the critical velocity, respectively. Moreover, the ratio of nonlinear to linear base frequencies decreases as the Winkler and Pasternak coefficients, maximum deflection of the first wall and characteristic length are increased in couple stress theory.
Originality/value
This paper is a numerical investigation of nonlinear vibration analysis for triple-walled carbon nanotubes conveying viscous fluid.
Details
Keywords
Rajneesh Kumar and Shaloo Devi
The purpose of this paper is to deal with the study of plane waves and fundamental solution in a modified couple stress generalized thermoelastic solid with three-phase-lag (TPL…
Abstract
Purpose
The purpose of this paper is to deal with the study of plane waves and fundamental solution in a modified couple stress generalized thermoelastic solid with three-phase-lag (TPL) model of thermoelasticity.
Design/methodology/approach
It is found that for two-dimensional model, there exists two longitudinal waves, namely, longitudinal wave (P-wave), thermal wave (T-wave), and a set of coupled transverse waves (SV1 and SV2 waves). In addition, the fundamental solution for the system of differential equations for steady oscillations in terms of elementary functions has been constructed. Some properties of fundamental solution are also established. Various particular cases of interest are also deduced from the present investigations and compared with the known results.
Findings
The phase velocity, attenuation coefficient, specific loss and penetration depth are computed numerically and presented graphically to see the effect of TPL model, dual-phase-lag (DPL) model and GN-III model in the presence of couple stress parameter.
Originality/value
The results are compared with couple stress TPL model, couple stress DPL model and GN-III model.
Details
Keywords
The purposes of this study, a mathematical model of generalized thermoelastic theory subjected to thermal loading is presented to study the wave propagation in a two-dimensional…
Abstract
Purpose
The purposes of this study, a mathematical model of generalized thermoelastic theory subjected to thermal loading is presented to study the wave propagation in a two-dimensional porous medium.
Design/methodology/approach
By using Fourier–Laplace transforms with the eigenvalue approach, the physical quantities are analytically obtained.
Findings
The derived method is evaluated with numerical results, which are applied to the porous medium in simplified geometry.
Originality/value
Numerical outcomes for all the physical quantities considered are implemented and represented graphically. The variations of temperature, the changes in volume fraction field, the displacement components and the stress components have been depicted graphically.
Details
Keywords
Sanjay Kumar Singh, Lakshman Sondhi, Rakesh Kumar Sahu and Royal Madan
The purpose of the study is to perform elastic stress and deformation analysis of a functionally graded hollow disk under different conditions (rotation, gravity, internal…
Abstract
Purpose
The purpose of the study is to perform elastic stress and deformation analysis of a functionally graded hollow disk under different conditions (rotation, gravity, internal pressure, temperature with variable heat generation) and their combinations.
Design/methodology/approach
The classical method of solution, Navier's equation, is used to solve the governing equation. The analysis considers thermal and mechanical boundary conditions and takes into account the variation of material properties according to a power law function of the radius of the disk and grading parameter.
Findings
The findings of the study reveal distinct trends and behaviors based on different grading parameters. The influence of gravity is found to be negligible, resulting in similar patterns to the pure rotation case. Variable heat generation introduces non-linear temperature profiles and higher displacements, with stress values influenced by grading parameters.
Practical implications
The study provides valuable insights into the behavior of displacement and stresses in hollow disks, offering a deeper understanding of their mechanical response under varying conditions. These insights can be useful in the design and analysis of functionally graded hollow disks in various engineering applications.
Originality/value
The originality and value of this study lies in the consideration of various loading combinations of rotation, gravity, internal pressure and temperature with variable heat generation. Furthermore, the study of effect of various angular rotations, temperatures and pressures expands the understanding of the mechanical behavior of such structures, contributing to the existing body of knowledge in the field.
Details